4.15 release!

[_1SMV_Gitano]

Originally Posted by stugumby

I have tried the google drive version and the mission 4 today client versions. Have updated Java and from real trek put in there r282 audio driver. Now in device manager it shows as high definition audio but not as Realtek. My nv1050 video card also shows in device manager as a high def audio device. I can get game to load using console and 2nd and 4th sound wrapper.in sound selection settings section I can get balanced 2eax and desktop speakers to show in panel but no sound. Am awaiting hot fix . I am in Windows 10, earlier 4141 versions run fine with sound, I have no extra sounds imported for samples etc. so problem must be in sound settings or wrapper?

Sorry, my bad. I made a test myself and it turns out that the game could run even feter unistalling Java. So it could be the sound wrapper as others suggested

[shelby]

Originally Posted by _1SMV_Gitano

So it could be the sound wrapper as others suggested

Is this problem appears only in Windows10?

[JacksonsGhost]

I now have 4.15 working with sound with Realtek audio in Windows 10!

After failing to get the game to start despite trying all 8 install options twice, I have been trying a few alternative fixes.

The thing that worked for me was selecting "Windows Sonic for Headphones" under "Spatial sound" in my Windows 10 speaker options. On my PC setup these speaker options are most easily accessed by right-click on the speaker icon on the taskbar.

Immediately after doing so I tested the Creative sound install that I had done earlier and it works, with or without headphones! Woohoo! I don't see myself doing much real-life work today!

[stugumby]

I tried that and i only get red lights on in dsoa xp eax 2 and the indirect, still no sound, i rolled my realtek back to original so now it says realtek again. when i try creative it dosnt activate any of the eax settings. very frustrating indeed. Glad your up and running. what are your settings creative and client or console?

[JacksonsGhost]

Originally Posted by stugumby

... Glad your up and running. what are your settings creative and client or console?

Thanks stugumby, I'm glad to be up and running, though I'm not sure that it's all good yet.

I'm actually running on the Indirect sound option now because the Creative one has no sound now. Somehow the Spatial sound option had kicked back to "Off" and now using "Windows Sonic" has no effect.

I'm not sure whether they are console or classic because I made those installs a couple of days ago and only named them by sound card option. I think they were classic installs.

In regard to EAX lights, when I go into the non-working Creative sound page I see no lights. When I go into the working Indirect sound page I have lights for EAX 1 and EAX 2, which I think is the limit for my Realtek audio setup. Fingers crossed it stays that way after next reboot!

[Catsy]

Client or console will not impact anything related to your issue.
Client just start the game as usual, Console allows having the console right at the start of the game, this allows seeing errors or debug messages when the game starts. Apart from that there is no difference between those two options.

Regarding the sound wrappers, in most of the case DOSAL or DOSAL XP should work fine (one of the two depending on your install). If none are working indirect sound should always work but support only a limited set of features (for example you will be limited in the number of available channels (the number of simultaneous sounds that the game can play at the same time))

The lights show which level of EAX supported by the wrapper in use. There will always only 2 for Indirect Sound.

@stugumby Concerning your issue, I've sent you a PM, please check it.

[Sita]

Originally Posted by stugumby

I tried that and i only get red lights on in dsoa xp eax 2 and the indirect, still no sound, i rolled my realtek back to original so now it says realtek again. when i try creative it dosnt activate any of the eax settings. very frustrating indeed. Glad your up and running. what are your settings creative and client or console?

what if try to stay with sound from 4.14.1?
i mean during instalation of 4.15 not select - install any sound variants?

for more clearest experement best way to install in on fresh copy of 4.14.1

[stugumby]

Ok, so i was stooging around looking at working 4141 conf ini and compared it to no sound 415 ini, found my sound set to 0 in conf ini!! changed that to sound=1 and bammo working sound now, using dsoa xp with auto select gave me in a cave sound, went to eax2 and working now! many thanks to Catsy who asked me to send him my conf ini.

[Sita]

that is good news)