|
|
|
|
#1
07-25-2022, 12:33 PM
|
|||
|
|||
I have tried the google drive version and the mission 4 today client versions. Have updated Java and from real trek put in there r282 audio driver. Now in device manager it shows as high definition audio but not as Realtek. My nv1050 video card also shows in device manager as a high def audio device. I can get game to load using console and 2nd and 4th sound wrapper.in sound selection settings section I can get balanced 2eax and desktop speakers to show in panel but no sound. Am awaiting hot fix . I am in Windows 10, earlier 4141 versions run fine with sound, I have no extra sounds imported for samples etc. so problem must be in sound settings or wrapper?
|
|
#3
07-25-2022, 05:20 PM
|
|||
|
|||
|
just tried again to reload this is the sound log it created, this was console/ indire
-- new session --
ERROR !Invalid error code. ERROR !Cannot get DirectSound interface ! Initializing DirectSound playback device... ERROR !Invalid error code. ERROR !Cannot get DirectSound interface ! Initializing DirectSound playback device... ERROR !Invalid error code. ERROR !Cannot get DirectSound interface ! Initializing DirectSound playback device... ERROR !Invalid error code. ERROR !Cannot get DirectSound interface ! Initializing DirectSound playback device... ERROR !Invalid error code. ERROR !Cannot get DirectSound interface ! Initializing DirectSound playback device... ERROR !Invalid error code. ERROR !Cannot get DirectSound interface ! Initializing DirectSound playback device... ERROR !Invalid error code. ERROR !Cannot get DirectSound interface !
|
|
#4
07-25-2022, 05:35 PM
|
|||
|
|||
|
still no sound but boxes show, hit apply no sound
DEBUG: EAX1_Startup
SIMD render [X] num channels 16 Speaker config restored. Audio finished. Initializing DirectSound playback device... Primary buffer created. Playback format is set : sampling rate = 22050, num channels = 2. Buffer caps : Transfer rate = 4096, CPU overhead = 0. Default speaker config is : 1310724. System speaker config is : DSSPEAKER_STEREO Direct sound audio device initialized successfully : DX Version : 7 Hardware - ENABLED [3D sounds buffers : 256] Extensions - ENABLED : Creative EAX 1.0 [X] - disabled Creative EAX 2.0 [X] - ENABLED Creative EAX 3.0 [X] - disabled Creative EAX 4.0 [X] - disabled Creative EAX 5.0 [ ] - disabled Interactive 3DL2 [ ] - disabled Sensaura ZoomFX [ ] - disabled Sensaura MacroFX [ ] - disabled DEBUG: EAX2_Startup SIMD render [X] num channels 16 grab0000.jpg
|
|
#5
07-25-2022, 05:35 PM
|
|||
|
|||
|
Quote:
__________________
work hard, fly fast
|
|
#6
07-26-2022, 09:52 PM
|
|||
|
|||
|
Quote:
__________________
|
|
#8
07-27-2022, 01:34 AM
|
|||
|
|||
|
I now have 4.15 working with sound with Realtek audio in Windows 10!
 After failing to get the game to start despite trying all 8 install options twice, I have been trying a few alternative fixes. The thing that worked for me was selecting "Windows Sonic for Headphones" under "Spatial sound" in my Windows 10 speaker options. On my PC setup these speaker options are most easily accessed by right-click on the speaker icon on the taskbar. Immediately after doing so I tested the Creative sound install that I had done earlier and it works, with or without headphones! Woohoo! I don't see myself doing much real-life work today! 
|
|
#9
07-27-2022, 05:25 AM
|
|||
|
|||
|
I tried that and i only get red lights on in dsoa xp eax 2 and the indirect, still no sound, i rolled my realtek back to original so now it says realtek again. when i try creative it dosnt activate any of the eax settings. very frustrating indeed. Glad your up and running. what are your settings creative and client or console?
|
|
#10
07-27-2022, 11:28 AM
|
|||
|
|||
|
Quote:
I'm actually running on the Indirect sound option now because the Creative one has no sound now. Somehow the Spatial sound option had kicked back to "Off" and now using "Windows Sonic" has no effect. I'm not sure whether they are console or classic because I made those installs a couple of days ago and only named them by sound card option. I think they were classic installs. In regard to EAX lights, when I go into the non-working Creative sound page I see no lights. When I go into the working Indirect sound page I have lights for EAX 1 and EAX 2, which I think is the limit for my Realtek audio setup. Fingers crossed it stays that way after next reboot!
|
 |
|
|
Hybrid Mode
