4.10 Support & Bug Reporting

[Uufflakke]

Easy install, no problems.
But on the CW-21 I noticed some spelling errors?
I couldn't find some decent images of the original gauges as a reference but according our spelling rules there are some errors.

'Steigt' should be 'Stijgt' (Steigt is German)
'Daaltt' should be 'Daalt'
'Reserve Krystal' should be 'Reserve Kristal'

I know our spelling changed a lot over the years but as far as I know these words haven't changed since the 40's.

[rakinroll]

Thanks Zaelu. Unfortunately i did not.

[Flanker35M]

S!

Not sure if this is a bug or a "feature" that affects only Windows7 users, but here goes. I have a pristine 4.09m installation from the 1946 DVD, which worked just fine. After I installed the 4.10m just fired up the game(DVD must be in drive). I noticed visibly lower FPS. So turned on the FPS meter and was right, my FPS had dropped from solid 60FPS with VSync on to a mere 25-48FPS with only my plane in the sky and no AI!

Nothing helped to cure this until I used a "fixed" il2fb.exe and all the problems were gone. Just FYI.

[Feathered_IV]

Well done to all who contributed to 4.10.

A small detail, the Hs-129's only show fighter markings rather than the more common 4-letter codes.

[1.JaVA_Sjonnie]

Originally Posted by Feathered_IV

Well done to all who contributed to 4.10.

A small detail, the Hs-129's only show fighter markings rather than the more common 4-letter codes.

Change the unit number to a non- fighter unit if it bothers you.
and: read the historical info about the HS129, that will tell you they initially flew as a unit attached to fighter units.

[1.JaVA_Sjonnie]

I have a bug to report which seems connected to unit numbers.

A user tried loading a mission from this campaign (which is for stock 4.09m)
http://www.mission4today.com/index.p...etails&id=3820

however, mission fails to load.
In the FMB, the IL-2 gets stuck showing only a map. The user then changed the unit number from [Erg_JG2600] to [g0100] and then it works.

I read about the unit number list having been edited to accomodate for the HS-129 units, could it be it has to do with that? [Erg_JG2600] has been around for years in all stock versions.

[GerritJ9]

Further to CW-21B Interceptor pit:
Compass deviation chart- "Compas Deviatie" should be "Kompas Deviatie".
Not sure if this is a bug, but the indicators on the panel for things like supercharger, undercarriage, flaps etc. don't work (perhaps not implemented?).

[csThor]

Originally Posted by 1.JaVA_Sjonnie

I have a bug to report which seems connected to unit numbers.

A user tried loading a mission from this campaign (which is for stock 4.09m)
http://www.mission4today.com/index.p...etails&id=3820

however, mission fails to load.
In the FMB, the IL-2 gets stuck showing only a map. The user then changed the unit number from [Erg_JG2600] to [g0100] and then it works.

I read about the unit number list having been edited to accomodate for the HS-129 units, could it be it has to do with that? [Erg_JG2600] has been around for years in all stock versions.

Old units were neither renamed nor removed. I just checked the unit in question, it's still there like it was in 4.09.

[csThor]

Originally Posted by Feathered_IV

Well done to all who contributed to 4.10.

A small detail, the Hs-129's only show fighter markings rather than the more common 4-letter codes.

Actually the Hs 129 never showed bomber-style code except as Stammkennzeichen when serving as test aircraft. Really correct would be individual characters (i.e. "Red L") but that would probably take more time and work than it's worth.

[flyingscotsman]

I too have slowed to a crawl after 4.10 over a clean & verified , reinstall, 408, 4.09.
What do you mean a fixed .exe file. How can I get that>
Thank you

In fact I have 'solved' it by doing what it says earlier on this whole series. In QMB changed the map,
changed plane....and it all worked....sorry for wasting people's time. (First log on, first post, first error !)