Any newview experts out there that can help me ?

[The Sea People]

Trying to setup newview v37 so that I can use hat switch to pan view. I have cleared all the hat switch commands in clod. So far I am getting paning but there are some issues.

-Sometimes your paning and then it jumps/ snaps to a view. Especially on the first hat movement after changing between internal and external views.
-in external view you cannot fully rotate around the aircraft, there are some limits. Strangely it does not seem to be aligned with the aircraft either, you can rotate more one way than the other.

Also not sure on what some of the newview options do such as:

-"Alternate mode for F2,F8"
-and under Pan >"newview mode on start" What mode should I select ?

[28_Condor]

Hi

I have not noticed these problems with my program... I have 37m version, which version you have?

At the moment I'm not on my computer to answer your last two questions ...

[The Sea People]

Hi
I have 37m version, which version you have?



I am also 37m. I use to use an older one with il2 4.whatever.

[The Sea People]

Hi

I have not noticed these problems with my program...



Just to confirm, you can do a full orbit the external camera around your plane ? Just like you can when using the mouse to control external view.

[Sokol1]

I sugest us to see this topic (Google translate):

http://translate.google.com/translate?hl=pt-BR&ie=UTF8&prev=_t&rurl=translate.google.com&sl=ru&tl=en&twu=1&u=http://www.sukhoi.ru/forum/showthread.php%3Ft%3D53729%26goto%3Dnewpost

BTW - Notice tips to use NewView to creat a "combat flaps position" to Bf 109. :)

Sokol1

[The Sea People]

I have v37m working fine with il2 4.10. Have matched the newview clod profile settings to those of what I have for 4.10 profile. Still cannot fully orbit around my aircraft in clod using external view. Not sure what wires I have got crossed.

The external limits preventing me from orbiting the camera in f2 view seem to be very similar to the incockpit limits that model the pilot not being able to twist his head around. However they don't stay aligned with the plane in external view, ie the sector being masked in external view could be to the front or side of the aircraft.

[28_Condor]

SeaPeople,

Yes, I can do a full orbit the external camera around my plane... You will not be forgetting to press the F10 key? ;)

I'm currently using the following settings:

http://img.photobucket.com/albums/v259/PauloDRK/NV_config.jpg

[The Sea People]

Yeah I had been trying f10. I ended up getting mad and deleting it along with my clod settings to try and clear all the controls back to default. Be nice if they had a restore defaults button.
Anyway I went to re-download newview 37m and the website lists 2 fixes for it, unfortunately the links no longer work for atleast one of the fixes and the main download. Currently searching .....

[SG1_Lud]

this happened to me when I was trying to male custom profiles and changed the default assignments for zooming, panning etc with the mouse. If I recall well, the first F2, external view, worked ok, but the second press, you could not pan anymore. Ended up deleting everything, starting new profile and leaving the views at default.

PS: I was not using newview

[28_Condor]

Mate,

Try unzipp my instalation... My Newview is updated, until I remember... Delete or save in another media your current installation.

Also try your controls back to default (as LUD suggested), I actually modified anything in my settings of vision.

If you have no way to retrieve the default values ​​I try to save my settings controls to put here for download

Be nice if they had a restore defaults button

yes, that would be really necessary :)

[The Sea People]

Cheers for that Condor. I gave it a quick try and was getting the same issue. I guess that means I have a conflict somewhere else. I will try and figure out how to get all my cliffs of dover settings back to default. I actually re-downloaded ClOD, but it find some files I had not deleted :(.

[28_Condor]

Try to edit your conf.ini before (a personal file is better that default, to avoid overwrite during updates). I have default values here:

[HotKey view]
Control F2=outsideViewNextEnemy
Control F1=toggleShowCabin
Y=padlockViewPrev
Alt F7=outsideViewEnemyDirectGround
U=padlockViewNext
Alt F6=outsideViewEnemyDirectAir
Alt F2=outside
Alt F1=inside
Shift S=toggleUp
C=nextCabin
Shift C=changeCabin
Control C=prevCabin
Alt M=toggleShowMirror
Alt 9=cabin9
Alt 8=cabin8
Alt 7=cabin7
Joystick2+Key3=padlockViewForward
Alt 6=cabin6
Alt 5=cabin5
Joystick+Key3=toggleAim
Alt 4=cabin4
Alt 3=cabin3
F8=outsideViewFollow
Alt 2=cabin2
F7=outsideViewEnemyGround
Alt 1=cabin1
F6=outsideViewEnemyAir
F5=padlockViewGround
F4=padlockView
F3=outsideViewFly
F2=outsideView
Shift F7=outsideViewFriendGround
F1=insideView
Shift F6=outsideViewFriendAir
Shift F5=padlockViewFriendGround
Shift F4=padlockViewFriend
Shift F2=outsideViewNextPlane
[HotKey viewSet]
Alt MouseLeft=DashBoard
End=fov70
PageDown=fov90
Delete=fov30
Mouse5=FOV
MouseMiddle=Rotate
F10=StartStop
MouseRight=Len
MouseLeft=Offset
NumPad/=Reset
[HotKey viewPan]
NumPad-4=PanLeft2
NumPad-3=PanRight3
NumPad-2=PanDown
NumPad-1=PanLeft3
Pov225 Joystick+Pov=PanLeft3
Pov270 Joystick+Pov=PanLeft2
Pov315 Joystick+Pov=PanLeft
Pov0 Joystick+Pov=PanUp
Pov45 Joystick+Pov=PanRight
Pov90 Joystick+Pov=PanRight2
Pov135 Joystick+Pov=PanRight3
NumPad-9=PanRight
NumPad-8=PanUp
Pov180 Joystick+Pov=PanDown
NumPad-7=PanLeft
NumPad-6=PanRight2
NumPad-5=PanReset
[HotKey viewSnap]
NumPad-4=Snap_m2_0
NumPad-3=Snap_3_0
NumPad-2=Snap_0_m2
NumPad-1=Snap_m3_0
Pov225 Joystick2+Pov=Snap_m3_0
Pov270 Joystick2+Pov=Snap_m2_0
Pov315 Joystick2+Pov=Snap_m1_0
Pov0 Joystick2+Pov=Snap_0_2
Pov45 Joystick2+Pov=Snap_1_0
Pov90 Joystick2+Pov=Snap_2_0
F9=SnapPanSwitch
Pov135 Joystick2+Pov=Snap_3_0
Pov180 Joystick2+Pov=Snap_0_m1
NumPad-9=Snap_1_0
NumPad-8=Snap_0_0
NumPad-7=Snap_m1_0
NumPad-6=Snap_2_0
NumPad-5=Snap_0_2
[HotKey timeSpeed]
CloseBracket=timeSpeedUp
OpenBracket=timeSpeedDown
Quote=timeSpeedNormal
[HotKey orders]
9=order9
8=order8
7=order7
6=order6
5=order5
4=order4
3=order3
2=order2
1=order1
0=order0
Escape=deactivate
Alt=select
Control=expand
Enter=Enter
Tab=activate
Backspace=Backspace


;)

[The Sea People]

Thanks for trying to help me work through it Condor, Sokol and Lud, much appreciated :). I give up for now, I will just have to go with the default view controls.

[Sokol1]

Here NView version 37X - CloD compatible accord Hruks.

http://narod.ru/disk/45523770001.2fcdc2125c1487d10ac8d92210d94fb1/nw_bob.rar.html

Type the Capcha numbers to download.

Tip: before open NV for first time open the file conf.ini and change the line

[LangIni]
FileName=Russian.ini >>> to English.ini (available too German, Italian, Polish, Slovak and Ukainian)

Sokol1