Positions fixed at 50%

[andrea78]

S! I've got a problem with some command as flaps, radiator, prop pitch control... they are setted at 50% and when I try to change them (i.e. opening radiator) I see the bar at 100% while press button, than after releasing it the command come back to 50%... any suggestion?
Thanks.

[JG53Frankyboy]

actually it depends on the aircraft...................

Pitch 109 is "fixed" at 50%
Pitch Spit IIa moves between 0 & 100

just ry them all out :D
and keep in mind that Mixture 0% (bar down) is full rich mixture in the Spit, Hurri and Blenheim.

[andrea78]

Ok, thanks! In 109, the difference from oil radiator bar (that can be "moved") and water bar ("fixed") cause my doubts!

[VO101_Tom]

Its logic is simple. If the position of the handler faculty signals the exact value, you see it on the screen then. If the position of the switch is not unambiguous (reeling, buttons, tumbler switch for example) you do not see it on the screen then. Only if it is in usage.

[ATAG_Doc]

I actually removed the info window wih the sliders due to the confusion it caused me at first. I find it's easier to check positions as the real pilots would have done. Wing root pin for water rad, yellow positional lever for oil rad, and clock like gauge for prop pitch.

+1