Bf109 startup

[f/jg300_bart]

Hi all !!!!!
First sorry for my english i m bad
http://data.imagup.com/5/1117091514.jpg
Just few questions?

1==>BF 109 was start manualy with cranck handle on right side by mecanicien who turned inertialwheel who was coupling with flywheel by pilot?

2==>On my picture there are 3 Hand levers (Manettes or Tirettes in french)
Number 9 ==>starter coupling hand lever
Number 8 ==>Engine inition hand lever
Number 7 ==>Engine instant stop hand lever

Number 9 is for coupling wheels ???????????
Number 8 is for mixture in COD as it's injection motor it's strange!!!!!When I pull hand lever RPM fall.
Number 7 is to stop contact?????stop magnetos?????

3===>Manual fuel pump (egual electric pump now???) is to pressurize the fuel lines and priming pump as motor pump?

Thks all and srry for my english
I m hope you understand my noob english;)

[robtek]

In the Pilots Handbook for the 109E that i have are only the two lower handles mentioned.
There are also only 2 handles in the pictures.
The upper handle ,middle in your pic and cod, is to change the ignition to early firing to start the engine and/or to clean the sparkplugs.
The lower handle is for the clutch between the inertia-starter and the engine.
The upper handle in cod seems to be for cutting off fuel and ignition in case of emergency.
The handbook says after winding up the inertia starter give 2 to 4 pushes to the priming pump, set magnetos to 1+2 and pull first the ignition handle and then the clutch handle.
Release handles after the engine has started.