4.13.2 de-bugging

[Soldier_Fortune]

Originally Posted by Tolwyn

Ok. I had another post here, and I deleted it in favor of this one.

I believe I have this one solved. My mistake was assuming that when resetting the (4) Hollow Triangle back (refer to the readme PDF) to its original position, you should manually turn Bombsight Automation OFF again. YOU DO NOT. It automatically turns itself off. So, after you send the triangle back to its starting position with the Bombsight Automation ON command, DO NOTHING. It'll turn itself off.

There is a NTRK recording attached to prove that this is indeed CONFIRMED.

So, the updated procedure is:

1. Calculate the angle as outlined in the PDF for your first run.
2. Drop Bombs.
3. At your discretion, close your bombay doors.
4. Toggle Bombsight Automation ON until the hollow triangle (4) has made it's way counter-clockwise to its initial starting position and stops. Bombsight Automation will turn OFF automatically (you don't need to do anything).
5. Calculate the angle as outlined in the PDF for the next drop
6. Repeat for any subsequent drops.

Yes! That works!

I was a bit confused because when the hollow triangle stops after the reset, the sound of the little motor of the BS can be heard yet. So I thought it was necessary to switch the BS Automation to OFF. But we only need to wait few seconds and the device will switch OFF itself.


Thanks by your research!