IL-2 Cliffs of Dover Cliffs of Dover Optimization and Performance Thread

[clear009]

At really high graphic settings it runs ok in cockpit view... On external I turn them down a bit ( but still looks great). I was hesitant on buying it since it ran like crap about a year ago on the lowest settings but I said what the hell since I heard good things about the latest patch.. Thank god I did.. I Couldn't be happier with the performance. I'm getting about 35 FPS on Medium-High settings now!!!!

[ptwparkinson]

After playing il2 storm of war for say 10 or 15 minute the game freezes

could this be down to insufficient memory or do I just need to bite the bullet and upgrade to a new pc ( if it`s just a matter of adding some memory to keep me going for now it will give me more time to save for an upgrade )

I copied and pasted my pc specs from belaric as follows --- gaphics card is the nvidia 275 ( bit confusing below )

Operating System System Model
Windows XP Home Edition Service Pack 3 (build 2600) Enclosure Type: Desktop
Processor a Main Circuit Board b
3.00 gigahertz Intel Core2 Duo
64 kilobyte primary memory cache
4096 kilobyte secondary memory cache Board: Gigabyte Technology Co., Ltd. GA-N680SLI-DQ6
Bus Clock: 333 megahertz
BIOS: Award Software International, Inc. FA 05/03/2007
Drives Memory Modules c,d
650.13 Gigabytes Usable Hard Drive Capacity
316.13 Gigabytes Hard Drive Free Space

TSSTcorp CD/DVDW SH-S182D [CD-ROM drive]

SATA WDC WD15 SCSI Disk Device (150.04 GB) -- drive 0
SATA WDC WD50 SCSI Disk Device (500.11 GB) -- drive 1
USB Flash Memory USB Device [Hard drive] (1.03 GB) -- drive 2 3072 Megabytes Installed Memory

Slot 'A0' has 1024 MB
Slot 'A1' has 1024 MB
Slot 'A2' has 1024 MB
Slot 'A3' has 1024 MB
Local Drive Volumes

c: (NTFS on drive 0) 150.04 GB 4.24 GB free
d: (NTFS on drive 1) 500.10 GB 311.89 GB free

Network Drives

Controllers Display
NVIDIA nForce 590/570/550 Serial ATA Controller (3x)
Primary IDE Channel [Controller]
Secondary IDE Channel [Controller]
Standard Dual Channel PCI IDE Controller
NVIDIA GeForce GTX 275 [Display adapter]
ACR Acer X243W [Monitor] (24.0"vis, s/n LAG040084300, September 2007)
Bus Adapters Multimedia
GIGABYTE GBB36X Controller (2x)
Standard Enhanced PCI to USB Host Controller
Standard OpenHCD USB Host Controller ASUSTeK Virtual Capture Device
Creative SB X-Fi
Communications Other Devices

1394 Net Adapter
Marvell Yukon 88E8052 PCI-E ASF Gigabit Ethernet Controller
Physical Address: 00:1A:4D:46:B9:46
Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
primary Auto IP Address: 192.168.1.66 / 24
Gateway: 192.168.1.254
Dhcp Server: 192.168.1.254
Physical Address: 00:1A:4D:46:B9:44
NVIDIA nForce Networking Controller
Physical Address: 00:1A:4D:46:B9:40
NVIDIA nForce Networking Controller #2
Dhcp Server: 192.168.1.254
Physical Address: 00:1A:4D:46:B9:42

Networking Dns Server: 192.168.1.254
Texas Instruments OHCI Compliant IEEE 1394 Host Controller
Asus Video3D Device
HID-compliant consumer control device (2x)
HID-compliant device (3x)
USB Human Interface Device (2x)
HP Officejet 7300 series
GoFlight Virtual HID Keyboard
HID Keyboard Device (2x)
HID-compliant mouse (2x)
NVIDIA Network Bus Enumerator (2x)
Root Enumerator
Saitek Magic Hotkey Device
Saitek Magic Keyboard
Saitek Magic Mouse
Officejet 7300 series (DOT4USB)
USB Composite Device (2x)
USB Mass Storage Device (2x)
USB Printing Support
USB Root Hub (2x)

kind regards

paul woods

[RickRuski]

Sli is supported , but you have to instal the support code yourself and for those running Sli there is a benefit.

I have a thread in the technical area with instructions on how to instal the code supplied by Luthier (it looks like official support will never come as development was shut down before any link with Nvidia was established). Crossfire has never as far as I know been supported.

http://forum.1cpublishing.eu/showthread.php?t=37316