3-axes trim wheel / Do-it-yourself-style

[Kodoss]

Good news everyone.

Today came the package with my little platine.
So I did some soldering with the wires and the USB cable (and this time without problems).

PICT0043.JPG

It is only a test wiring for checking, so not final wire length or position, and it worked as I expected.
The next on my list is, powder coating of the housing.
This could take some time, because I don't do this myself.

[Kodoss]

Good news everybody.

On monday I was able to bring my case to the powder coating guys. He sayed I should call friday, then it could be ready. If not then definitely mid next week.

The color will be "RAL 7021" also known as "RLM 66".
On the weekend I will polish the wheels and then finish them with clear varnish.

So no pics this time.

[Kodoss]

Last update!!!

After 2 days of soldering, screwing and swearing I finished my trimwheel.

Pic of Insanity:
PICT0052.JPG
This was the hardest part. Soldering and let the wire and wheels enough place.

The completed Product:
PICT0054.JPG
PICT0055.JPG
PICT0056.JPG
So much work and nobody will ever see it.

And built on the 2 throttle quadrants.
PICT0057.JPG

I will put some red and green paint one of the screws on each wheel, so that I can see where center is and how many revelutions I turn.

I will test the setup later today and trim the bf 110 out.

Edit: all Pics in 2048*1536 pixel.