Warthog Centre Stick Mod

[JG52Krupi]

I received and tested the teensy board today, it works.

Now I need to understand which wires should go where

[JG52Krupi]

So after some help from C6_trollbug I now have the wires setup correctly... unfortunately they are reversed i.e. rather than turning on when i press a button they turn off

Here is the code I am using...

void setup() {
pinMode(0, INPUT_PULLUP);
pinMode(1, INPUT_PULLUP);
pinMode(2, INPUT_PULLUP);
pinMode(3, INPUT_PULLUP);
}

void loop() {

// read the digital inputs and set the buttons
Joystick.button(1, digitalRead(0));
Joystick.button(2, digitalRead(1));
Joystick.button(3, digitalRead(2));
Joystick.button(4, digitalRead(3));

// a brief delay, so this runs 20 times per second
delay(50);
}

[JG52Krupi]

Sorted

void setup() {
pinMode(0, INPUT_PULLUP);
pinMode(1, INPUT_PULLUP);
pinMode(2, INPUT_PULLUP);
pinMode(3, INPUT_PULLUP);
}

void loop() {

// read the digital inputs and set the buttons
Joystick.button(1, digitalRead(0) == LOW);
Joystick.button(2, digitalRead(1) == LOW);
Joystick.button(3, digitalRead(2) == LOW);
Joystick.button(4, digitalRead(3) == LOW);

// a brief delay, so this runs 20 times per second
delay(50);
}

[JG52Krupi]

Almost finished.....

So the first thing I did was purchase Metalnwoods amazing Warthog extender

http://simhq.com/forum/ubbthreads.ph...3184593/1.html

Then went about thinking of how to position it and get it positioned at the right height and was shown this cheap effective design from Paradaz

http://simhq.com/forum/ubbthreads.ph...3377271/1.html

So thanks to Paradaz and Metalnwood I now have a brilliant centre mounted warthog which I will be converting to a KG13 in a few weeks :goofy:

Today I tested the centre mount and I am VERY VERY happy its fantastic, so much more control its precise and hopefully will improve my terrible accuracy :thumbsup:

Anyway that's enough from me here are some pics...















Sorry for the terrible quality.

[JG52Uther]

Looks fantastic mate!

[JG52Krupi]

Finished

[Skoshi Tiger]

That really cool!