Skins by Aelius

TomcatViP · #1 11-05-2011, 01:57 PM

Very informative too. Thx !

LcSummers · #2 11-06-2011, 02:51 PM

Hi aelius,

after installing your revised skin of Q1+VB i have a problem with the spinner. The top of the spinners are not any more green, thhey are now white or natural. Its not only your aircraft i found it on some skins from GRAF too.
Any suggestions?

Some are as they should be, some are not.
Thanks

LC

aelius · #3 11-06-2011, 04:18 PM

Here is the spinner hub that was created originally, replicating the one in the photograph. As you can see, two thirds are black and one third white with a green tip. Although appropriate for the plane at rest, the hub flickers when turning, and I blurred the edges so that it would look better in flight.

Is this what you are seeing, LcSummers?

LcSummers · #4 11-06-2011, 04:32 PM

Quote:

Originally Posted by aelius

Here is the spinner hub that was created originally, replicating the one in the photograph. As you can see, two thirds are black and one third white with a green tip. Although appropriate for the plane at rest, the hub flickers when turning, and I blurred the edges so that it would look better in flight.

Is this what you are seeing, LcSummers?

No, sorry its not. The spinner is olive drab and the green portion is white/metal.

This occurs when flying and watching your skin when plane is selected.

PS: Template is original but when selecting, spinner changes.

aelius · #5 11-06-2011, 05:53 PM

I've downloaded and flown the template (NAGr.1 template.jpg) and can't duplicate the problem. An olive-green hub with a white tip suggests the default has been selected.

Can anyone else think of a better explanation?

aelius · #6 11-06-2011, 06:26 PM

Although changes to the spinners are not previewed in Plane Options, they should be displayed when the plane is flown.

I am at a loss to understand why they don't, especially if you've chosen the correct Paint Scheme.

LcSummers · #7 11-07-2011, 04:09 PM

Hi aelius,

so it seems thats not only me with this problem. The funny thing is, that some Graf 110 skins showing this problem too, others dont. I know last time when used those skins they were functioning.

Maybe it has something to do with the new patch.

Nevermind, thank you for looking at this problem.

Cheers

LC

QUOTE:

Plt Off JRB Meaker Plt Off JRB Meaker

Default New spinner colours for the Dorniers?
I noticed recently that the spinner colours had been correcected on the Ju88 as of the last patches,I do hope they can correcect the Dornier spinners too.

They are all in green,whereas historically they were yellow,red and white all it needs is the default Dornier skin to have three other alternatives.

I know there are far more important errors to correct at the moment with COD but it would be nice at some stage.

I'd do it myself but I don't have a template,if anyone can get one please let me know,I'm kinda desparate for one

JG26_EZ · #8 04-28-2012, 12:31 PM

First let me start out by repeating everyone by saying, excellent work, and a beautiful job with all of your skins.
Thanks!

Quote:

Originally Posted by aelius

I am at a loss to understand why they don't, especially if you've chosen the correct Paint Scheme.

With regards to the spinner problem you mentioned earlier with Bf110C-4 NAGr1. I have found, that with the Bf109's spinner, there's a location for the spinner when it's moving, and a location for the spinner when it's stationary.. I found out the hard way, finished my skin and took it for a fly, didn't notice until I landed and shut down my engine that my spinner had changed colour completely heh.

I have downloaded your skin and can see that you have painted only the moving spinner, but can't see the "stationary paint". Could it be that you've forgot to paint the stationary "location"?

I'll post this to give you an example of what i'm talking about.. (if you don't already know)