Sensitivity is backwards?

Borsch · #1 10-20-2011, 09:07 PM

From what I know from racing games, 50% Sensitivity is the linear setting for steering wheels. I've put 50% in CloD and it seems to be the case indeed. Wether you want linear response is up to you of course.

O_TaipaN · #2 10-21-2011, 04:18 AM

Quote:

Originally Posted by Borsch

From what I know from racing games, 50% Sensitivity is the linear setting for steering wheels. I've put 50% in CloD and it seems to be the case indeed. Wether you want linear response is up to you of course.

So 50% is linear and not 0%?

Anyone else find this?

Also is there any way to see the "shape" of the curve like in ROF and DCS? Would be easier to tell then. Also would be nice to customize it.

David198502 · #3 10-21-2011, 06:32 AM

well i thought the 0% setting is the linear curve

VO101_Tom · #4 10-21-2011, 10:22 AM

Hi. I had problem with this, and yes, works in reverse. 0 is agile, 1 is sluggish. (I set it 0.3)

"Sensitivity. Sets the linearity of the control input, that is, defines
whether the controller input is directly mapped to controller output in a
straight line where input is equal to output, or whether the output is nonlinear
and smaller controller movements are mapped to a smaller output
than direct, and larger are mapped to greater control output.
To put it simply, linear input provides for more responsive controls, and
non-linear input is more precise and steady.
0 sensitivity is fully linear, and 100 is fully non-linear."
(clod manual page 44)

Trooper117 · #5 10-21-2011, 10:46 AM

Thanks for this info!..

O_TaipaN · #6 10-21-2011, 12:24 PM

Thanks guys yep I did another test and definitely 0% is the way to go for linear.

I've only been flying a few of the planes, and they seem to be ok on 0% although I haven't done any serious fighting online yet.

But does anyone find any of the planes too sensitive on 0%? Any recommendations what % is a good middle ground for all planes?

Cheers

GF_Mastiff · #7 10-21-2011, 02:01 PM

0.03 on all sensitivity is what I'm set to. left is right and right is left in Russia I guess.

Borsch · #8 10-21-2011, 02:45 PM

Quote:

Originally Posted by VO101_Tom

Hi. I had problem with this, and yes, works in reverse. 0 is agile, 1 is sluggish. (I set it 0.3)

"Sensitivity. Sets the linearity of the control input, that is, defines
whether the controller input is directly mapped to controller output in a
straight line where input is equal to output, or whether the output is nonlinear
and smaller controller movements are mapped to a smaller output
than direct, and larger are mapped to greater control output.
To put it simply, linear input provides for more responsive controls, and
non-linear input is more precise and steady.
0 sensitivity is fully linear, and 100 is fully non-linear."
(clod manual page 44)

You live - you learn. Thank you very much for this! I guess racing games are different then