G940 goes solid and cannot be moved

[stufer]

Hi Varrattu

Thanks very much for your reply.

I have checked the Conf.ini file and that is indeed FF=1 so that is alright. When I change that to 0, I have the locked up solid joystick all the time so it is as if at some point in the flight, the FFB is turning off, although I can feel it shake when I fire the guns or stall etc...

On checking the settings, the global settings are as follows:

Overall Effects Strength 65%
Spring Effect Strength 70%
Damper Effect Strength 65%

and the Centering Spring is disabled.

I have tried moving these around from 0 to 100 but it is always the same.

The Logitech Profiler software version is 5.09.131 Date 05/05/2010

Are there any other settings or versions I should give?

On having a go at it this morning I've been flying for quite a while in the Hurricane without any problems. But then if I exit the flight and load up another, say in the 109, it locks up immediately before the new flight loads and then I'm back with the same problem - very strange!

I appreciate your help.

Cheers
Stu.