Control sensitivity

[Extreme_One]

Originally Posted by Formula88

OK, I got it figured out! I was on the right track but what I failed to realize was that my 1946 was on a fresh install and I hadn't set up my controller for it yet. After I set up my controller in 1946 I went into its config file and sure enough the proper values were now in there. I simply copied and pasted from the 1946 config to the CoD one. Here is what it looks like:

[rts_joystick]
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
FF=0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 1 6 10 15 22 33 44 58 72 100 0
1Y=0 1 6 10 16 23 31 43 56 73 100 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0
1RZ=0 1 4 8 13 21 28 39 52 69 100 0
1U=0 100 100 100 100 100 100 100 100 100 100 0
1V=0 100 100 100 100 100 100 100 100 100 100 0

This, everyone, I have confirmed to work! You need the 1X values for it to work not the X values, the axes with the 1 infront are what windows uses to set the joystick sensitivity.

Perhaps this should be stickied so everyone can benefiet from this.

Confirm working here.

Controls are now far smoother. I was having real trouble with gunnery due to the rudder feeling way too twitchy, now it feels as smooth (maybe even smoother) as flying in IL21946.

Thanks for finding this. Now we just need the devs to create an ingame interface so we can tweak it ingame.

[whoarmongar]

Good post . I to have suffered from oversensitive controls near the centre position. I would really like to try this.
However I like to play online and my question is will altering the values in this file fall foul of the "anticheat" features that I have heared about ?
So far I have resisted the urge to mod this game in any way,purely because I dont want to find myself excluded from being able to play online.
You only have to look at OFP and Arma2 to see how the mod comunity forces improvements and prolonges the life of a game

[skouras]

which cong. one..
the one in the documents or the one on the steam common etc..

[Extreme_One]

Originally Posted by whoarmongar

...
However I like to play online and my question is will altering the values in this file fall foul of the "anticheat" features that I have heared about ?...

lol no.

This isn't modding it is merely changing your personal config or preferences or whatever you want to call it.

Originally Posted by skouras

which cong. one..
the one in the documents or the one on the steam common etc..

The one in your documents.

***\My Documents\1C SoftClub\il-2 sturmovik cliffs of dover\conf.ini

It even works for me when I keep the Steamcloud enabled.

[skouras]

thank you very much

[jimbop]

Finally had a chance to test this properly. Relevant section of my 1C Softclub conf.ini is:

[rts_joystick]
FF=0
X=0 1 4 9 16 25 36 49 64 81 100 0
Y=0 1 4 9 16 25 36 49 64 81 100 0
Z=0 10 20 30 40 50 60 70 80 90 100
RZ=0 10 20 30 40 50 60 70 80 90 100 0
U=0 10 20 30 40 50 60 70 80 90 100 0
V=0 10 20 30 40 50 60 70 80 90 100 0
1X=0 1 6 10 15 22 33 44 58 72 100 0
1Y=0 1 6 10 16 23 31 43 56 73 100 0
1Z=0 100 100 100 100 100 100 100 100 100 100 0
1RX=0 100 100 100 100 100 100 100 100 100 100 0
1RY=0 100 100 100 100 100 100 100 100 100 100 0
1RZ=0 1 4 8 13 21 28 39 52 69 100 0
1U=0 100 100 100 100 100 100 100 100 100 100 0
1V=0 100 100 100 100 100 100 100 100 100 100 0

There is no difference in control sensitivity when I switch between everything at 1 and everything at 100 (or anything more sensible in-between) for both X, Y and 1X, 1Y.

Not sure what's going on with my config since other users have reported this to be working. Any ideas?

[gordo62]

Hi I have the x52 pro and find it way to sensitive as well the in game sensitivity sliders seem to have no effect cuting and pasting the config.ini seems to have no effect. In searching for an answer I came across a program that Oleg made IL2 Joy control.
http://www.mission4today.com/index.p...etails&id=1021

Will this work for COD?

Thanks

Gordo62

[KDN]

I have two questions for you guys:
First, do we have a consensus whether the old IL2 [Joystick_RTS] functions in CoD conf.ini?

Second, as far as ALL the trim axes go, does the dead zone at 0% and at 100% refer to the center (50% of travel) of the axes or the way the are shown in the control panel ?(0% all the way to the left and 100% all the way to the right)



I would ask the same thing about the rudders but those are usually self centered so I am assuming the center is 0% in rudders.

[JG301_HaJa]

Well, in my *.ini file there is only one entry under [rts_joystick] and that's FF=1.
Nothing else and I feel that my controls are hugely sensitive and there is no way
of tuning them from a menu in game!

Feels like something is amiss here ?!

[jimbop]

Originally Posted by gordo62

Hi I have the x52 pro and find it way to sensitive as well the in game sensitivity sliders seem to have no effect cuting and pasting the config.ini seems to have no effect. In searching for an answer I came across a program that Oleg made IL2 Joy control.
http://www.mission4today.com/index.p...etails&id=1021

Will this work for COD?

Not sure - let us know please! The in-game sensitivity slider does work for my X52 Pro but what I want is to tweak a non-linear response which is duller in the centre and increasingly sensitive outwards.