Joystick/Throttle/Pedals not recognized

Herr Hoffman · #1 04-09-2011, 02:54 PM

Not sure if this is the issue or not but might be something to check. In IL2:1946 there was a limit of 4 joystick devices that the game would recognize. If you had more than that it would only recognize the first 4. The work around is to force the devices you want to use into the first 4. The reason I know this is I have 5 devices; stick, throttle, 2 mfds, and pedals. I had to give up one in the game. Like I said I don't know if COD has this limitation since I don't have it yet but it may be worth checking it out.

123-Wulf-123 · #2 04-09-2011, 04:49 PM

Nope, you can use as many USB devices as you want in Il-2, and likewise in CoD.

emtguf · #3 04-09-2011, 06:37 PM

I only have 3 devices anyway. Joystick, Throttle, and pedals.
I do have a collective I built for Blackshark, but it remains unplugged if I am not flying as the cord gets in the way.

This is definitely an issue within this game that the devs are going to have to straighten out. I hope they have it fixed before the American release or they are going to have a lot more people pissed.

#4 04-09-2011, 07:13 PM

i have a Microsoft sidewinder (that works fine in il2 1986, wings of prey and rise
and don't recognize in il2 cliffs of Dover, only buttons.

this is my conf.ini
[rts]
tickLen=30
;ProcessAffinityMask=2
maxTimerTicksInRealTick=20
; 0 - not use, 1 - show cursor and not capture, 2 - not show cursor, and capture
mouseUse=2
; 0 - not use, 1 - use if hardware exist
joyUse=1
; 0 - not use, 1 - use if hardware exist
trackIRUse=1
DisableIME=0
culture=en-GB

[rts_mouse]
SensitivityX=1.0
SensitivityY=1.0
SensitivityZ=1.0
Invert=0
SwapButtons = 0

[rts_joystick]
FF=1

MOH_Hirth · #5 04-16-2011, 11:03 PM

[QUOTE=horrido;258476]i have a Microsoft sidewinder (that works fine in il2 1986, wings of prey and rise
and don't recognize in il2 cliffs of Dover, only buttons.

I was with this problem too, just need click to open a box, save as... load the profile.

Dano · #6 04-17-2011, 08:50 AM

Just built my new system and my controllers are no longer seen by CoD either, they worked perfectly on the old system which was running all the same software.

Bibi · #7 04-17-2011, 09:50 AM

Hi Hirth,
I was with this problem too, just need click to open a box, save as... load the profile.

However, exactly this does not function with some just

Best Regards. Bibi

David198502 · #8 10-15-2011, 11:19 PM

ch fighterstick here and win7 64bit...never had problems with the stick,...but would like to use the mousewheel as an axis.

brando · #9 04-09-2011, 08:26 PM

Quote:

Originally Posted by 123-Wulf-123

Nope, you can use as many USB devices as you want in Il-2, and likewise in CoD.

I can't even get three USB devices to work, viz. my CH HOTAS. I have managed to enable the X, Y and Z axes on the Fighterstick (Elevator, Aileron and Throttle) but I am unable to get my rudder pedals recognised, nor the further three axes which I use for trims, based on a third CH PCB.

123-Wulf-123 · #10 04-11-2011, 04:33 PM

I'm in the same boat I can get axes INGAME depending on what .ini I load, but trying to use CH mapped mode, or trying to assign the axes using the controls section, clicking on axes etc, SIMPLY DOES NOT WORK, I believe it to be a Win7 64 bit/COD problem, rather than my controllers which all work perfectly in 46.