Stick and Rudder issue

[TheGrunch]

I haven't got the game yet. Sounds like a bug, then! Suggestion: Rename your Confuser.ini file, reboot your computer or at least close Steam, and try again from scratch with everything plugged in from the start.
Then, copy the keybindings section over from your old Confuser.ini.

[choctaw111]

Perhaps you can create a CH profile.
It allows you to combine all of your controllers.

[Biggs]

i downloaded CH manager and re calibrated both devices. I gave the pedals axis "R" but it still comes up ingame as the rudder moment being "X" and the toe brake being "Y".

very confusing.

[Biggs]

is anyone else running CH devices both pedals and stick without problem?

[seaeye]

Originally Posted by Biggs

is anyone else running CH devices both pedals and stick without problem?

Hey, try this site out for walk throughs on how to get them working together:http://www.ch-hangar.com/forum/forum.php

Took me a day or two to work it all out, it's pretty simple in the end.

[Biggs]

Originally Posted by seaeye

Hey, try this site out for walk throughs on how to get them working together:http://www.ch-hangar.com/forum/forum.php

Took me a day or two to work it all out, it's pretty simple in the end.

you mind just telling me how you "worked it all out"?

[Targ]

Here is a basic map for you.

Make sure and load the map, than download it and than use the stick in direct mode. Once the english version is out we will get a map file and profile for the CH gear.

Also make sure that you go into axes section of the controls and set up your aileron, elevator, Rudder and throttle control up.

[seaeye]

Originally Posted by Biggs

you mind just telling me how you "worked it all out"?

I could but I would be just repeating what has been written to a much higher standard than I can hope to reproduce here. Join the forum, download the 'Dummies Guide' and you'll have it sorted in no time.

[Ploughman]

Here's mine

Joystick+AXE_RZ=1rudder
Joystick+AXE_Y=1elevator
Joystick+AXE_X=1aileron
Joystick+AXE_U=1throttle

I've rudder on a twist. I would assume that if you've two peripherals then you should discriminate by one being joystick1 and t'other being joystick2. If you put a - before the 1 ie; =-1rudder then it inverts the axis. Hope that helps some.