|
|
|||||||
| IL-2 Sturmovik The famous combat flight simulator. |
 |
|
|
Thread Tools | Display Modes |
|
|
|
#1
03-28-2011, 12:50 PM
|
||||
|
||||
Well I stripped the Throttle and there is simply not enough room to get magnets and sensor in to replace the Rotary pots. One pot was a faint possibility but the myriad of wires running over the existing pots makes it a very risky business so I will leave it.
__________________
klem 56 Squadron RAF "Firebirds" http://firebirds.2ndtaf.org.uk/  ASUS Sabertooth X58 /i7 950 @ 4GHz / 6Gb DDR3 1600 CAS8 / EVGA GTX570 GPU 1.28Gb superclocked / Crucial 128Gb SSD SATA III 6Gb/s, 355Mb-215Mb Read-Write / 850W PSU Windows 7 64 bit Home Premium / Samsung 22" 226BW @ 1680 x 1050 / TrackIR4 with TrackIR5 software / Saitek X52 Pro & Rudders 
|
|
#2
03-31-2011, 05:05 AM
|
|||
|
|||
|
Almost done... everything works.. I just have to come up with some kind of cover and some kind of knob for the two Z & Y sliders in the middle. The red switc is the shift button and the two black buttons are triggers 1 & 2. Knob is Z pot. The st6ick is hed to the throttle with velcro so I can take it apart if I have to ever fix anything... I had to expand the base of the stick beyond what I had initially cut.. All the boards are on the top part and all I have to do is disconnect the sliders from the board underneath.
 
|
|
|
|
Hybrid Mode
