![]() |
|
|
|
#1
|
|||
|
|||
|
Thanks for the long awaited 4.10 I know there are a lot of features that people will love.
I have downloaded the 410 patch and the 410 DS patch. I have setup a 410m dedicated server (CRT=2), but when I connect I am getting a Timeout = 1 error. Installation on the client was over a stock 4.09m installation (Built fresh and tested connection to a CRT=2 4.09m server before updating) Installation on the server was over a stock 4.09m Dedicated server (Same one I tested above with) Both client and server were updated. The problem I have is that only 50% of the players that have tried were able to successfully connect, and the rest all got Timeout=1 errors. If I set CRT=0 then I can connect without any problems. Any ideas what we can try next ? you can email me at warbirdsofprey@hotmail.com Thanks, WildWillie |
|
#2
|
|||
|
|||
|
Another issue related to FMB.
When you create a mission in FMB and limit the nationalities for the homebase, it is saved and works when you load the mission on the server. But when you edit the same mission in FMB and save it again the nationalities limits are not there anymore. You have to manually add them back each time WildWillie |
|
#3
|
|||
|
|||
|
early American markings with red dot on late jets.
|
|
#4
|
|||
|
|||
|
Please adjust the mission date properly. Early US markings were used until May 15 1942.
|
|
#5
|
|||
|
|||
![]() I get this after i added in jettison bombs to controls and had tinkered in fmb with a f4u with bat bomb, only happens when first starting game and going into qmb. change a map or plane and retry and works ok. Last edited by stugumby; 12-24-2010 at 07:07 PM. Reason: added text |
|
#6
|
||||
|
||||
|
Trying to create a simple All Axis Planes vs. All Allied Planes for squad testing on the Kuban.
In the FMB all planes are made available to each side as appropriate, but in game many aircraft simply do not show up, no matter where I set the date in the mission. Also note that air spawns are set as default. Air spawns should be the option.
__________________
![]() Personally speaking, the P-40 could contend on an equal footing with all the types of Messerschmitts, almost to the end of 1943. ~Nikolay Gerasimovitch Golodnikov |
|
#7
|
|||
|
|||
|
Just a thought, once you set a key to jettison there is no dedicated key to open/close bomb bays. When you jettison from say a pe-2 with 4 fab 250 they are external so no problem, they just fall away but with internal loads the doors snap open and once bombs gone they close a few seconds later. is it feasable to implement a open/close bomb bay switch in the next update??
|
|
#8
|
||||
|
||||
![]() Got this same message, after trying one quick mission. I tried to restart the game, and even to reinstall the patch with no result. Quick Mission Builder is out of order, always reporting the same error. |
|
#9
|
|||
|
|||
|
Have you tried a different map in QMB, please?
__________________
|
|
#10
|
||||
|
||||
|
Not a Bug, but a neglect thing
There not a readme for Dedicated server 410, what's the code for new difficulty setting? Reliability G-force Limits Realistic Pilot Vulnerability Realistic Navigation No Player Map Icon No Fog Of War Icons |
![]() |
|
|