![]() |
|
|||||||
| IL-2 Sturmovik The famous combat flight simulator. |
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
Thanks. i will try these new settings later.
I use Omega drivers at the moment so i will look for the cat drivers. What i can't understand is why is does not work on my machine anymore, it always used to with my current setup. |
|
#2
|
|||
|
|||
|
Also is my resolution ok to be set at 1600x1200??
|
|
#3
|
||||
|
||||
|
your not running the ATI with Advanced AI on are ya.. check to see.. that might be it.
__________________
71st Eagle Squadron www.anon6.com - Blogger on DCS Series 71st Mastiff's You-Tube " any failure you meet is never a defeat; merely a set up for a greater come back " Asus||i7x5930k||16gb3200||GTX10808gb||ATX1200Corsa ir||CBTitanium7.1||Win10x64||TrackIr4Pro/ir||gladiator pro mkII||siatekpedals||X52Throttle||G15Keyboard/RazerMouse|| 32"LCD||2x7" lilliputs,1x9inc |
|
#4
|
|||
|
|||
|
Not sure. Worth checking though.
can't find the catalyst 7.11 drivers so will try the ATI Catalyst™ Display Driver 9.8 suite |
|
#5
|
|||
|
|||
|
Yes
In the reply to your post I highlighted the resolution in red you are running at make sure its set to 85 hz refresh rate. No don't install 9.8 it has problems with IL2 on your older card, thats why I mentioned 7.11 and not the latest Cat's. 7.11 download >> http://downloads.guru3d.com/ATI-Cata...load-1786.html Last edited by KG26_Alpha; 09-15-2009 at 11:24 AM. |
|
#6
|
|||
|
|||
|
Excellent, thanks again. Will download and try that driver later.
|
|
#7
|
||||
|
||||
|
There are several issues that show up in your dxdiag as well.
Firstly, you are quite short of hard drive space on all the drives and/or partitions Second, you are showing two sound devices in operation both at Full hardware acceleration. You need to disable the one you are not using to render sound in the game. Third, I would remove and reinstall the drivers for your motherboard, as you have made a couple of mistakes in applying them. The last good drivers for this board are the nVidia 5.10s. When installing, please be sure to avoid installing the nVidia IDE software. IIRC you will be offered this option during the installation, so don't use them and allow the generic Windows IDE drivers to be used instead. This will be be a much better alternative, and is the standard solution to a well-known historical issue. Finally. If you could find an "AMD Athlon XP " CPU somewhere you would get a better result overall compared to a Sempron CPU. This is your choice of course, and Socket A Athlons are a bit hard to find anywhere except Ebay. I found the Socket A page quite easily.... http://computers.shop.ebay.co.uk/i.h...hlon&_osacat=0 and some 3000+ Bartons are available quite cheap. You might need to update your BIOS to accommodate the processor, but your particular motherboard will easily handle it, Anyway, like I said, this last is optional - the first three items really need to be sorted out. B
__________________
Another home-built rig: AMD FX 8350, liquid-cooled. Asus Sabretooth 990FX Rev 2.0 , 16 GB Mushkin Redline (DDR3-PC12800), Enermax 1000W PSU, MSI R9-280X 3GB GDDR5 2 X 128GB OCZ Vertex SSD, 1 x64GB Corsair SSD, 1x 500GB WD HDD. CH Franken-Tripehound stick and throttle merged, CH Pro pedals. TrackIR 5 and Pro-clip. Windows 7 64bit Home Premium. |
![]() |
|
|