![]() |
|
|
|
#1
|
|||
|
|||
|
Quote:
Presumably there's a technical reason for this, as most of these advanced features seem to work around engine limitations. |
|
#2
|
||||
|
||||
|
Hi TD!
I think that a subtle fine tunning is needed on "Takeoff Line" and "Landing Straigh in" features. Takeoff Line: Whenever the leader (plane 1) is not the first to get airborne the flight goes into a mess as soon as it reaches the second waypoint (normfly) in which the AI planes are firstly instructed to keep formation (whatever the type). Usually one or more planes crash to the ground while trying to find their place through erratic flight behavior. I wonder if it would be possible to make the leader begin takeoff procedure some seconds before the others to avoid the mess... (BTW, the leaders should always go first don't you think so? Land Straight in: Planes land too close to each other to the point that some of them start chewing the tail of the guy ahead. I've found that "plane 4" uses to be the trouble maker because I don't notice this problem when I set the flight with only three planes. ---------------------------------------------------------------------- Obs. v4.12..............The Best Patch Ever!!! |
|
#3
|
||||
|
||||
|
Quote:
Aviar
__________________
Intel i7-4790 4-Core @3.60GHz Asus Z97-C Motherboard 16GB DDR-3 1600 SDRAM @800 MHz NVIDIA GTX 760 - 2GB Creative SB ZX SBX Logitech X-530 5.1 Speakers 27" AOC LED - 2752 Logitech G15 Gaming Keyboard CH FighterStick-Pro Throttle-Pro Pedals Logitech G13 Gameboard GoFlight GF-T8 Module WIN 8.1 |
|
#4
|
||||
|
||||
|
There is a problem with planes taking off big US carriers, most of the times one or two aircraft will crash into the superstructure deck. As Japanese carriers have much smaller superstucture deck, their planes don't crash into it.
It began since 4.12 or 4.11 I think as in old Pearl Harbour everything worked fine. It's very frustrating, hopefully the AI for US carrier take off can be revised. |
|
#5
|
||||
|
||||
|
Quote:
|
|
#6
|
|||
|
|||
|
Quote:
thanks |
|
#7
|
||||
|
||||
|
i dont read before, and i have a problem. Already install 4.12.2 and touch all off labels on the HUD, but i still see the identification labels of the aircraft i see and i cant quit this! what im missing???
__________________
Core2Quad 9400 2.66Ghz 45nm - 4x2gb ddr2 800 Kingston = 8GBRAM - XFX Radeon HD 5850 Black Edition 1Gb DDR5 765Mhz/1440steam/ 4.5Gbps- 1/2 Terabyte Wn D 32mb - Mother Assus P5QLE - P&C Silencer 750W - Sentey RJA246 LCD 4 coolers - DVD/RW 20x LG - LCD Samsung P2350n 23" - Edifier C2 2.1+1 waiting for: Il-2: Armée de l’Air; Continuation War; Battle for Moscow; Stalingrad; El Alamein; Sicily; The West Air Campaign; Berlin ZakKandrachoff
|
|
#8
|
|||
|
|||
|
There's a shortkey for changing icon types, default is Ctr-I, IIRC.
|
![]() |
| Thread Tools | |
| Display Modes | |
|
|