4.10 Support & Bug Reporting

[Azimech]

I had problems too to connect to a certain 4.10 server. But the funny thing is, the server was populated. I was able to connect to different 4.10 servers.

When flying a two-engined aircraft, I get HUD notification when I change power to engine 1 and 2, I get proppitch notification when changing proppitch on #1, but I don't get proppitch notification when changing #2. Not a very big deal for me since I use Saitek throttles and have the lever for #1 next to it, but I thought nothing wrong with mentioning it.

[28_Condor]

S!

Originally Posted by _RAAF_Furball

I also have a 410m dedicated server set to CRT=2 in confs.ini and no-one can connect - they also receive the Timeout = 1 error.

CRT=1 won't allow them to connect either.

RAAF,

This problem is possibly due to a modded instalation, we had this problem trying crt=1 in our server and only, at this moment, work with clean installation in server and client side.

BUT yet my question about how to configure the new options was not answered:
http://forum.1cpublishing.eu/showthr...d=1#post206812



Cheers!

[TheGrunch]

Seems like if you choose 2x250lb bombs with the Spitfires you only get one.

[Aviar]

Originally Posted by TheGrunch

Seems like if you choose 2x250lb bombs with the Spitfires you only get one.

This is confirmed on my computer. However, I checked all the Spit versions and I only get this problem on two of them:

Spitfire F IXc, 1942
Spitfire F IXc, 1943


Aviar

[_RAAF_Furball]

Originally Posted by wildwillie

I have setup a 410m dedicated server (CRT=2), but when I connect I am getting a Timeout = 1 error.

Installation on the client was over a stock 4.09m installation (Built fresh and tested connection to a CRT=2 4.09m server before updating)

Installation on the server was over a stock 4.09m Dedicated server (Same one I tested above with)

Both client and server were updated. The problem I have is that only 50% of the players that have tried were able to successfully connect, and the rest all got Timeout=1 errors.

If I set CRT=0 then I can connect without any problems.

Thanks,
WildWillie

Originally Posted by _RAAF_Furball

I also have a 410m dedicated server set to CRT=2 in confs.ini and no-one can connect - they also receive the Timeout = 1 error.

CRT=1 won't allow them to connect either.

If I set CRT=0 then people can connect without any problems.

Originally Posted by 28_Condor

This problem is possibly due to a modded instalation, we had this problem trying crt=1 in our server and only, at this moment, work with clean installation in server and client side.

Negative on the MODs aspect .....
MODs have not touched the server nor my client installation at any time.
But thank you .......

A little more info to hopefully jog someone's grey matter ....
I have a vague recollection that CRT=2 wouldn't allow people to connect when I first installed DS 4.09 .... and then after an unknown period time (and making no other changes), CRT=2 did work ok.

Wait mode /ON

[Genosse]

Folks!

Maybe somebody has already mentioned it but here're some "bugs" I've found after expanding a 4.09 DF mission with some of the latest 4.10 features ...



Everytime I re-edit the DF mission the previously assigned nations are gone ...



How does this work? There's no message appearing while flying the DF mission announcing how many aircraft are still left. Or ... have I missed something in the 4.10 guide?



Has this been done on purpose? Why then?



Maybe a saving bug in the FMB? Maybe some corruption while creating the .ntrk files? In the recordings of a flown DF mission the previously assigned skins to AI aircraft won't be shown for some reason ...


That's it for now ...

Don't be disencouraged by all the postings here, TD! Keep up the good work, folks!

[Faust]

Genosse,

I believe that when 4.10 is installed the default for time stamps in the display filter is off. Turn it on and you should see the time stamps. (At least that was the case for me.)

Daidalos Team,
As previously mentioned, the nationalities are saved in the .mis file. However, they are not read back in when re-loading the mission in FMB. The nationalities are read back in when playing the mission. It would be great if this could be fixed in 4.11 (or sooner ). This is not a mod-related issue. Pure 4.10m nothing else. Could someone from TD please confirm?

Thanks much guys for the great new additions.

[GF_Mastiff]

Besserbia Map multiple aircraft 1940 *2 hurricanes, #4 spits, 2 spit 40 early, 2 spits 40,
2 MC202 3series 1939, 2 MC202 1940, BF109E4, 2 HE111 1939.

Played for 40 min and the game started to grow into a slide show and stopped responding and CTD.

Clean install from 4.07 to 4.10m.

[Genosse]

Originally Posted by Faust

Genosse,

I believe that when 4.10 is installed the default for time stamps in the display filter is off. Turn it on and you should see the time stamps. (At least that was the case for me.)

Daidalos Team,
As previously mentioned, the nationalities are saved in the .mis file. However, they are not read back in when re-loading the mission in FMB. The nationalities are read back in when playing the mission. It would be great if this could be fixed in 4.11 (or sooner ). This is not a mod-related issue. Pure 4.10m nothing else. Could someone from TD please confirm?

Thanks much guys for the great new additions.

Oops! Stupid me ... thank you for pointing me to that, Faust.

Reading, understanding and comprehending is the key to success!

[Genosse]

Originally Posted by Genosse

How does this work? There's no message appearing while flying the DF mission announcing how many aircraft are still left. Or ... have I missed something in the 4.10 guide?

Oh, well ... it seems that it does work on 4.10 DF servers ... after all limited aircraft have been shot down they won't been shown in the list of available aircraft. I'd wish there was an announcement in the chat window about it though ...

Sorry for bothering you, TD!