|
|
#1
12-21-2012, 04:54 PM
|
||||
|
||||
Problem with skins
I hope this is the right section of the forum for this post.
I use to fly the Bf110 with the Schwere Jagde skin by Checkmysix. I built a mission with three Bf110s intercepting Wellingtons. In FMB markings are deselected and when I play I see correctly the skin markings. But when I watch the recorded track , I see both the markings of the skin and the default markings. It happens only with this skin and this aircraft. Suggestions? 
|
|
#2
12-21-2012, 05:02 PM
|
||||
|
||||
|
It's a bug mate, afraid I don't think there is anything you can do about it
__________________
Regards Chris  http://www.aircombatgroup.co.uk/index.php Gigabyte z77-d3h, Intel Core i5-3570K 3.40GHz (OC 4.2GHz), Corsair Vengeance Low Profile 24GB DDR3 PC3-12800C9 1600MHz Dual Channel Kit , Samsung 120GB SSD 840 SATA 6Gb/s Basic, Seagate Barracuda 7200RPM 1TB SATA 6Gb/s 64MB, Cooling Silencer Mk II 750W '80 Plus Silver' PSU, GTX580 3gb OC
|
|
#3
12-21-2012, 05:15 PM
|
||||
|
||||
|
Quote:
You could use Fraps to record and use their screenshot button as well...they have a free limited vershion available, as in limited recording length...I've not tried this, but it should work
__________________
 GigaByteBoard...64bit...FX 4300 3.8, G. Skill sniper 1866 32GB, EVGA GTX 660 ti 3gb, Raptor 64mb cache, Planar 120Hz 2ms, CH controls, Tir5 Last edited by SlipBall; 12-21-2012 at 05:27 PM.
|
|
#4
12-21-2012, 05:49 PM
|
||||
|
||||
|
Quote:
|
 |
|
|
Linear Mode
