![]() |
|
IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games. |
![]() |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
![]()
Hey all, is it just me or is the radiator now inoperable in the spitfire since the latest Beta patch?
I used to be bale to mvoe the leaver using the clickable cockpit - now it's stuck in the up position, plus assigning a key to the open/close radiator command doesnt work either??? Can anyone jump on and check this for me to see if it's just me? And yep I have CEM on. Thanks all! |
#2
|
|||
|
|||
![]()
Mate, mine works fine. Don't know why yours isn't.
|
#3
|
|||
|
|||
![]()
What about temperature effects?
|
#4
|
|||
|
|||
![]()
Anamorphic or however U spell it, Option is On by chance?
|
#5
|
|||
|
|||
![]()
I´m having the same problem, anybody find a solution? I´ve tried mapping to differrent axis on both G940 joystickand throttle and keys to open/close. Antowhatever controls are off and so is temperature effects.
|
#6
|
|||
|
|||
![]()
I've had no problems with the radiator, but I have it linked to an axis, not a key.
|
#7
|
|||
|
|||
![]()
i'v got it to a key on the throttle on my cougar no problem here works fine
please disable anthromorphic or whatever option and report back don't use multiple commands at the same time with this option [over than 2 at the same time] also be sure that the key that you are use is not assign to another command Last edited by skouras; 08-01-2011 at 02:44 PM. |
#8
|
||||
|
||||
![]()
With temperature effects off there might be no radiator control.
__________________
Win 7/64 Ult.; Phenom II X6 1100T; ASUS Crosshair IV; 16 GB DDR3/1600 Corsair; ASUS EAH6950/2GB; Logitech G940 & the usual suspects ![]() |
#9
|
|||
|
|||
![]() ![]() |
#10
|
|||
|
|||
![]()
Yup, i think that was what was causing my issue! With temperature effects on i get control over the radiator. Haven´t noticed if having temp effects off kept the rad closed or open as the Spit 1A seems a lot slower than the later variant...
![]() |
![]() |
|
|