Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover > Technical threads > Performance threads

Performance threads All discussions about CoD performnce

Reply
 
Thread Tools Display Modes
  #1  
Old 04-15-2011, 02:53 PM
Conte Zero's Avatar
Conte Zero Conte Zero is offline
Approved Member
 
Join Date: Feb 2009
Location: Italy
Posts: 95
Default Forgive me, need little help [Epilecy filter]

I can't find the thread I used to refer to about this issue, but nevermind. In fact, I still see many different definitions for this .INI entry

Epilepsyfilter?
Epilecyfilter?
Antiepilecy?

in a word: what is the right word I should write before "= 0" ?

Thank you and sorry, still confused.
Reply With Quote
  #2  
Old 04-15-2011, 02:57 PM
b101uk b101uk is offline
Approved Member
 
Join Date: Apr 2011
Location: UK
Posts: 80
Default

I have the following

EpilepsyFilter=0
EpilepcyFilter=0
Epilepsyfilter=0
Epilepcyfilter=0
Antiepilepsy=0
Antiepilepcy=0
AntiEpilepsy=0
AntiEpilepcy=0
AntiEpilepsyFilter=0
AntiEpilepcyFilter=0
Antiepilepsyfilter=0
Antiepilepcyfilter=0
antiepileptic=0
AntiEpileptic=0

As far as I can see threw FPS benchmarking with fraps and image testing regardless of if they are set to =1 or =0 it makes no difference
Reply With Quote
  #3  
Old 04-15-2011, 03:05 PM
Conte Zero's Avatar
Conte Zero Conte Zero is offline
Approved Member
 
Join Date: Feb 2009
Location: Italy
Posts: 95
Default

Quote:
Originally Posted by b101uk View Post
I have the following

EpilepsyFilter=0
EpilepcyFilter=0
Epilepsyfilter=0
Epilepcyfilter=0
Antiepilepsy=0
Antiepilepcy=0
AntiEpilepsy=0
AntiEpilepcy=0
AntiEpilepsyFilter=0
AntiEpilepcyFilter=0
Antiepilepsyfilter=0
Antiepilepcyfilter=0
antiepileptic=0
AntiEpileptic=0

As far as I can see threw FPS benchmarking with fraps and image testing regardless of if they are set to =1 or =0 it makes no difference
you serious???
you mean you have inserted ALL those codes in your INI?
they go in the [core] section, right?
Reply With Quote
  #4  
Old 04-18-2011, 11:30 AM
tf_neuro tf_neuro is offline
Approved Member
 
Join Date: Mar 2011
Location: Sol III, Milky Way
Posts: 86
Default

Quote:
Originally Posted by Conte Zero
you serious???
...probably not...



BTW you could just uncheck the 'epilepsy filter' checkbox in the Video Options interface
Main menu <=
Options <=
Video <=
Top-right corner <=
Epilepsy Filter (or antiepilepsy or whatever) checkbox <=
UNCHECK <=
Click OK <=
(restart game if prompted)
Done.

Last edited by tf_neuro; 04-18-2011 at 11:33 AM.
Reply With Quote
  #5  
Old 04-18-2011, 01:01 PM
b101uk b101uk is offline
Approved Member
 
Join Date: Apr 2011
Location: UK
Posts: 80
Default

yes I have all ones I listed in my conf.ini that resides in the \....\My Documents\1C SoftClub\.....\conf.ini under the [BOB] section, the game its self changes "EpilepsyFilter=#" ware # is 0 or 1

from empirical testing using multiple runs of the same track and the fraps benchmark function to arrive at the standard deviation of video driver/graphics card/CPU/RAM fluctuation each time the game is restarted between test using the same .trk file with an automatic 160sec benchmark time, the figures for min/max/average FPS and total numbers of frames for the "EpilepsyFilter" being on or off are inside the natural standard deviation for repeat test.

That is to say the minimum frame rate was 42fps, the maximum frame rate was 67fps for all tests regardless of the "EpilepsyFilter" setting, the total frames rendered has a standard deviation of <79 frames with the highest "EpilepsyFilter=1" test being 5 rendered frames less than the highest "EpilepsyFilter=0" test, conversely the lowest recorded "EpilepsyFilter=0" test was 3 rendered frames lower than the lowest "EpilepsyFilter=1" test!

there for the 'epilepsy filter' at worst dose virtually nothing or the standard deviation of the video driver/graphics card/CPU/RAM fluctuation amounts to more or the 'epilepsy filter' is permanently on regardless of the conf.ini setting or it never existed in the first place.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 05:30 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.