Setting up Sli

KG66_Manta · #1 07-19-2013, 10:38 AM

I see to also be having the same issue, the profile has been saved in inspector ok but when I load the game the sli bar does not come on (it does for other games)

Any ideas where I am going wrong?

RickRuski · #2 07-21-2013, 07:15 AM

Hi Manta,

Sorry I have only just seen your post. If you have installed the profile correctly you should be ok. just one thought, have you recently updated your Nvidia drivers?. If you have, you have to reset your control panel Sli settings (these will have changed when you update your drivers). Make sure that you have "show Sli indicator bar" ticked in the 3D settings tab in Nvidia control panel. Here's a screen shot from my system with the bar enabled.

He111 · #3 09-27-2013, 06:23 AM

Just downloaded the recent Nvidia GEforce driver update, and am now trying to reinstall the IL2 cliffsofDover SLI code back into the list ... but am having problems. i ran the GeForce_SLI_Profile_Tool, dated 13th Oct 2012 from Nvidia and tried to export profiles but it crashed!

.. and no profiles text file. error is - " .. has stopped working. Windows will get back to you .. etc etc"

Any help?

RickRuski · #4 09-27-2013, 09:07 PM

He 111,

Have a look at this post.

http://forum.1cpublishing.eu/showthread.php?t=26236

If you have updated the Nvidia drivers you will have to re import your saved profile. What you will need to do is this: -

(1) install Nvidia inspector (if you have it installed already miss this step)
(2) Install "Luthiers" Sli code (you can find it in my first post with instructions on how to do this)
(3) It should then show as "Il2 Cliffs of Dover" in the Nvidia inspector profile list.
(4) Then export the profile list to some where like "My Documents". This will give you a copy to import back into Nvidia inspector when you have an update of drivers. (As there is no official support from Nvidia for Cliffs of Dover in their Sli profiles you will need to do this every time you have a driver update)

Hope this helps.

He111 · #5 09-28-2013, 11:04 AM

ummm, just downloaded latest version of NvidiaInspector, ran it, and there is no option for profile files ????

He111

RickRuski · #6 09-28-2013, 08:29 PM

He111,

On the page you show, come to the driver version line. At the right hand end you will see the square with the crossed emblem in it, click on that and it will open up the profile page.

At the top of that page it will show the profile version currently in use (usually it will show "Global" unless you change it ). At the right hand end of the profile panel there is a small downward pointing arrow, click on that and it will show all the current Nvidia profiles in alphabetical order. Unless you have already installed Luthier's code there will be no "Il2 Cliffs of Dover" profile showing. If you have installed it, but have updated the Nvidia drivers and not re-imported the "saved" profile it will have disappeared from the profile list. As I have said, there is no official support from Nvidia for "Il2 Cliffs of Dover" so every time you update your drivers you must re-import the profile from where you have saved it (I have made a new folder in My Documents called "C.o.D. Sli profile" and that is where I exported the copied profile to so that I can re-import it back into Nvidia Inspector when necessary).

Now comes the part that you will need to do. Install Luthier's Sli code.

http://forum.1cpublishing.eu/showthread.php?t=37316

This post will tell you how to do this. Remember, save any changes you make at the right hand side of the profile page (Apply Changes). If you have done everything correctly you will then find "Il2 Cliffs of Dover" listed on the profile page below the two current Il2 official profiles. Open up the profiles list from the Profiles panel at the top of the page and select "Il2 Cliffs of Dover" , the profile will show the coding supplied by Luthier, once again apply changes.

If you have trouble with this procedure I will be happy to help you.

He111 · #7 09-29-2013, 04:39 AM

Thanks Rick, that kinda worked, i now have SLI working for CLOD ... but it added a bug i didn't have before.

Now when i run CLOD, any version, The menu screens aren't refreshing. it appears to stall the program but when i mouse over the screen, menu options and click-boxes appear. Looks the the next screen loaded with options but background stayed as previous screen. Refresh problem?

I rebooted my computer, didn't help.

Any ideas, thanks again,good to see some CLOD faithful still around.

He111