Latest Patch HURRICANES NOT STARTING AGAIN???

[ACE-OF-ACES]

Originally Posted by Catseye

Geeze,
Also, key map is changed for full rich and full lean. They don't work!!

Maybe it's me but I don't think so.

Based on the patch notes I think it is you.. i.e.

Originally Posted by luthier

Other flight model and engine changes.
- Corrected the mixture control level on Hurricanes and Spitfires. It is now push forward for Lean, pull back for Rich. With that, moving the throttle lever to idle will return the lever to Rich.

Originally Posted by Catseye

Pretty fed-up with the quality of the fundamentals of the patches. I install them with the thought of "What have they broken now?"

Probably no more fed up than those who write the patch notes only to find out that nobody reads them

Originally Posted by Catseye

Correct me if I'm wrong.

Done!

[Catseye]

Originally Posted by ACE-OF-ACES

Based on the patch notes I think it is you.. i.e.




Probably no more fed up than those who write the patch notes only to find out that nobody reads them


Done!

You are such a piece of work.
Can you get them to start?? If so, tell me how? I bet you can't.
So how do you qualify it's me?? I can read the notes very well thank you and I've been flying this sim it all iterations and I'm no noob. Unless you have empirical data to show it's me best not to continue to be a snotty idiot. You certainly have not corrected me as I politely asked but rather showed your adolescent thinking. Nuff said.

[FG28_Kodiak]

I've the same problem, but why always starts a new thread, use the BUG Thread for describing this issue.

[Catseye]

Originally Posted by FG28_Kodiak

I've the same problem, but why always starts a new thread, use the BUG Thread for describing this issue.

I posted this info BEFORE the bug thread was created.

[ATAG_Dutch]

Confirm 100oct Hurri does not start.

Mixture control needs to be reversed in the controls menu. My mixture wheel was reversed, so wouldn't start any a/c as the lever back was giving lean.

Reverse your mixture controls and Spits are fine.

The Hurri won't start whatever you do.

[Catseye]

Originally Posted by ATAG_Dutch

Confirm 100oct Hurri does not start.

Mixture control needs to be reversed in the controls menu. My mixture wheel was reversed, so wouldn't start any a/c as the lever back was giving lean.

Reverse your mixture controls and Spits are fine.

The Hurri won't start whatever you do.

Hi Dutch:
Interesting.
I have the mixture control set to the throttle back position (default) - are you saying that this is in fact Lean? Or just the key map? I adjusted my settings to conform to full back being rich. I also noticed that you have to have the throttle full open before you can get the mixture control to move. Then when you pull the throttle back, the mixture control snaps back to full rich. Is this now the correct physical way it worked in RL?

SpitII starts fine - other iterations not so for me.

Cheers

[ATAG_Dutch]

Hiya Cats. Yep. My mixture is on an axis, and needed to be reversed to give correct mixture setting to start.

If you're using buttons, whicheverr leaned it out before will now be giving rich, presumably.

I've just found out that I can't start any Hurri at all. Something amiss with all Hurricanes.

The physical operation of mixture is correct. Just make sure of your controls in the menu. It won't help with the Hurris tho.

[ACE-OF-ACES]

Originally Posted by Catseye

You are such a piece of work.
Can you get them to start?? If so, tell me how? I bet you can't.
So how do you qualify it's me?? I can read the notes very well thank you and I've been flying this sim it all iterations and I'm no noob. Unless you have empirical data to show it's me best not to continue to be a snotty idiot. You certainly have not corrected me as I politely asked but rather showed your adolescent thinking. Nuff said.

You poor thing..

I know it can be upsetting at times, not being able to get things to work on the first try..

But here is some additional info that might help you out..

From the patch notes..

Originally Posted by luthier

FM
Conducted a huge amount of work correcting and improving aircraft flight models as well as most engine models.
- Corrected the Merlin engine model.

That and you might want to 'read' JG52Uther re-post of what Farber had to say wrt starting the engines..

Where you can see 'some' people got the engines to start because they had the patience to try a few things before posting here that it was a bug

Good Luck!

[HorrorRoach]

Originally Posted by ACE-OF-ACES

You poor thing..

I know it can be upsetting at times, not being able to get things to work on the first try..

But here is some additional info that might help you out..

From the patch notes..


That and you might want to 'read' JG52Uther re-post of what Farber had to say wrt starting the engines..

Where you can see 'some' people got the engines to start because they had the patience to try a few things before posting here that it was a bug

Good Luck!

Wow, so we have to read posts on a forum to start a plane? Feel sorry for all the people who don't come here

[ACE-OF-ACES]

Originally Posted by HorrorRoach

Wow, so we have to read posts on a forum to start a plane? Feel sorry for all the people who don't come here

Yes when it comes to the mixture setting being fixed, which resulted in it being reversed one only had to read the initial post by Luiter that contained the links to the patch along with the instructions on how to install it.. But that is to be expected.. As for starting the engines.. No reading of a post was needed, in that the first guy to get em started didn't have a post to read.. All that was needed there was a little trial and error and some patience (9 mins worth).. The latter being a rare commodity these days in the xgen sound byte gimmie gimmie now era.