|
Controls threads Everything about controls in CoD |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
cockpit controls, wont move when clicked
yes AEM is on, yes i hit F10. sometimes i can move the switches and sometimes I cant. for example in a 110 or 109 i cant move the magnetos on monday but tuesday i can. sometimes i can move the fuel cocks but not all the time. i click slow, i click fast, i click in diff areas. ive watched utube videos of start ups and try to emulate them. i set "O" for oil rad in the keyboard and my cockpit continues to open up.
clean version from steam. any help would be appreciated. |
#2
|
|||
|
|||
ok making some progress. using the x52, my throttle for my 109e seems to be disabled at some point during the flight. when i spawn in and taxi i can throttle up and throttle down. but 10 min later i get no response.
|
#3
|
||||
|
||||
Hi. How do you fly? Max difficulty setting? If yes, then turn off the Anthropomorph control. This feature allows you use only two things at the same time (The pilot have two arms, no hotas). The idea was good, but the PC controllers produce many false signals, so it causes bugs like you describes.
__________________
| AFBs of CloD 2[/URL] |www.pumaszallas.hu i7 7700K 4.8GHz, 32GB Ram 3GHz, MSI GTX 1070 8GB, 27' 1920x1080, W10/64, TrackIR 4Pro, G940 Cliffs of Dover Bugtracker site: share and vote issues here |
#4
|
|||
|
|||
yeah, turned it off already, flying with aem, limited fuel,limited ammo, etc.
i can fly the 110 and 111 no problems, but any 109 and the throttle sticks or the game forgets the control. Last edited by WP_saipan; 08-17-2012 at 03:55 AM. |
#5
|
|||
|
|||
1.08 beta seems to have helped. next question: bombs on a bf100 wont explode, i activate the master arm but no explosions.
|
#6
|
|||
|
|||
Do you have the fuses set correctly? If you have them set for high altitude (default), you'll have to be over 1k for them to explode.
__________________
i7-920 @ 4.1Ghz Gigabyte GA-X58A-UD3R 12 GB DDR3 1600 RAM GTX 560Ti with 2GB (latest beta driver) 22" monitor @ 1680x1050 TrackIR 5 Saitek X52 Saitek pedals Win7 64-bit Ultimate "Ignorance speaks loudly, so as to be heard; but its volume proves reason to doubt every word."~Wes Fessler |
#7
|
|||
|
|||
how do set the fuse? all i have is master arm switch.
|
#8
|
||||
|
||||
S!
Do you have visual effects on low? On an earlier beta I had crap fps so I put it on low, until I started to wonder why aren't my bombs exploding. They were exploding, I just couldn't see it because of the stupid low settings don't show any kind of explosion You can select the wanted fuse for each type of bomb in the loadout screen. Load the bombs in the left most tab using the drop down menus. These are the bombs that actually make into your plane. Then select the Bombs tab and then the bomb type you are going to use, then you can select the fuse type from the drop menu on the center of the screen. Low level is the choice for any bombing below 1km, and the high alt for anything above that. Note: making any selections on the Bombs tab won't do any changes in your selected loadout, just on the bomb fuses. Low level has a low arming time (the bomb must fly a short time before it is armed) of something like a fraction of a second, but a long delay. So it will explode after 14s from impact. High alt fuse is the opposite, having a long arming time, it must fly a long time before hitting anything to arm, so it is useful only for high alt level bombing. But after it has armed it will detonate immediately upon impact. Difference in damage is that low level burrows itself to the ground or ship or whatever it hits, high alt doesn't. Low level for such is good against ships as it will penetrate and then later explode inside. High alt for soft targets above ground because of the more "daisy cutter" effect as it detonated on ground level, not under. But in general, low level is good for most operations.
__________________
AMD 1055T Hexacore@3,4GHz - 2x4GB 1600MHz DDR3 - ATI 6950 2GB, flashed to 6970 shaders - Windows 7 Ultimate 64-bit - 30" LG W3000H (2560x1600) - TM Warthog Stick + Cougar Throttle - wooden DIY pedals with Hall sensor - FreeTrack |
#9
|
||||
|
||||
Same problem here, Antropomorhic off, and no mouse clicks, I reinstalled CoD and still no luck.
__________________
i7-3820 3.60Ghz ASUS SABERTOOTH X79 Corsair 16GB DDR3 1600 Radeon HD 7950 3GB 384-bit GDDR5 Cooler Master Silent Pro M2 850W OCZ 120 GB s SATA II (SSD) Seagate Barracuda 1TB 7200 RPM LG DVD-RW 24X GIGABYTE 1Mbps/2Mbps/3Mbps Bluetooth 4.0/Wi-Fi Termaltake Overseer RX-I |
#10
|
||||
|
||||
Quote:
Solved
__________________
i7-3820 3.60Ghz ASUS SABERTOOTH X79 Corsair 16GB DDR3 1600 Radeon HD 7950 3GB 384-bit GDDR5 Cooler Master Silent Pro M2 850W OCZ 120 GB s SATA II (SSD) Seagate Barracuda 1TB 7200 RPM LG DVD-RW 24X GIGABYTE 1Mbps/2Mbps/3Mbps Bluetooth 4.0/Wi-Fi Termaltake Overseer RX-I |
|
|