Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover > Technical threads > Controls threads

Controls threads Everything about controls in CoD

Reply
 
Thread Tools Display Modes
  #1  
Old 05-24-2012, 06:20 PM
pupo162 pupo162 is offline
Approved Member
 
Join Date: Feb 2010
Posts: 1,188
Default

Quote:
Originally Posted by Kodoss View Post
Those aren't knops/buttons.
Those are screws with nuts on each. This is an adjustable dead stop for the throttle. This cheap solution can be found anywhere in mechanical devices.
By old cars as an excample.
sorry Koddos, i mean the knobs/leavers, who are one to each side of the throttles on that image right side of the mouse.
Reply With Quote
  #2  
Old 05-24-2012, 08:25 PM
Kodoss Kodoss is offline
Approved Member
 
Join Date: Aug 2011
Posts: 262
Default

Those are levers for cleaning the oil filter.

If I understand it correct it has a rotating filter in which the oil is pressed. This filter can be closed through dirt or abrasive materials of the engine. To clean it, you move the lever from one position to the other to move a brush, that will clean the cylinder filter.
I took that knowledge out of a DB 601 E-G handbook. But I think the principle will be the same on a DB 601 A.

Just more workload for CEM.

Edit: It states Anlaßpumpen (starter pumps), which is wrong labeled. The Anlaßpumpe is below the hinged metal sheet on the right side of the Fuel selector (not Pumpenschalter).

Last edited by Kodoss; 05-24-2012 at 08:34 PM.
Reply With Quote
  #3  
Old 05-24-2012, 08:28 PM
pupo162 pupo162 is offline
Approved Member
 
Join Date: Feb 2010
Posts: 1,188
Default

such a big well placed knob for somethign so secundary.

thanks Kodoss, will go to sleep tonight with one bit more off airplane trivia
Reply With Quote
  #4  
Old 05-29-2012, 07:59 PM
Kodoss Kodoss is offline
Approved Member
 
Join Date: Aug 2011
Posts: 262
Default

I added a bug and a feature for the gunner position in my first post and here.

general:
http://www.il2bugtracker.com/issues/326 Gunner MG-Firing - setup - "bug"
http://www.il2bugtracker.com/issues/327 Gunner MG-firing - Mouse mode - "feature"
Reply With Quote
  #5  
Old 06-10-2012, 01:01 PM
JG53Frankyboy JG53Frankyboy is offline
Approved Member
 
Join Date: Oct 2007
Posts: 1,162
Default

DB601N units August 1940:
Bf109E-4/N
II./JG 26
*
Bf110C-4/N
II./ZG 26
III./ZG 26
II./ZG 76
*
Zerstörer Units in total:
Stab,I,II,III/ZG 26
Stab,I,II,III/ZG 76 (I. in Norway)
Stab,I,II/ZG 2
V(Z)/LG 1
+
1.&2. /Erp.Grp 210
*
*
Reply With Quote
  #6  
Old 06-10-2012, 01:33 PM
Kodoss Kodoss is offline
Approved Member
 
Join Date: Aug 2011
Posts: 262
Default

Regarding 100 OCT fuel in the Book "Messerschmitt Bf 110, Me 210, Me 410" from Mankau/Petrick is written:
Page 24:
"12.7.40(GL)...GL has decided that the available 601 N for now only in the Bf 110 will be build in. With that the assembly (601N) for the Bf 109 will not be applyed within the series."

"19.7.40 (GL).. the existing 601 N engines will be used up for the change over for on the front residing Bf 110. With that the further change of the Bf 109 groups (at now 1 group changed) will be dropped. Bf 109 F-series keeps the 601N engine. New build Bf 110 will be build with DB 601 A."

Page 25:
"26.7.1940 (GL) Genst. oppose the further fitting of 601N engines on BF 110, except for the already changing ZG...."

"9.8.40 (GL) For the already ordered change of in all 3 groups Bf 110 and the already changed group of Bf 109 will be 70 assembly engines for monthly 30 replacement A/C Bf 110 and 10 replacement A/C Bf 109, as well as 30 reseve engines provided through LC 3. That means by 280 engines in action a reserve of 10%...."

Page 27:
"27.9.40 (GL) Chef-Genst. has decided that 4 Zerstörer-groups BF 110 be fitted with 601 N and to be maintained. The supply for the groups matches the delivery of the firm Mtt, Augsburg. [Augsburg produced at that time [8.40-8.41] the Bf 110 E-1, see page 324] from the remaining engines 40 engines are buffer for the Bf 110. All other engines are to be f1/3 reserve and 2/3 are fitted in Bf 109 A/C.

Bf 110 E-1 is still ordered 2/5 with Dackelbauch and 3/5 w/o Dackelbauch...."

Page 28:
"18.10.40 (GL) At the moment it is impossilbe to refit additionally A/C Bf 109 E, except the already existing group to 601N..."

"26.10.40 (GL) Until the end of october 1100-1200 601 N engines are delivered. Thouse engines are build in 4 refitted groups Bf 110 and 1 group Bf 109, additionally in different A/C of the reconnaissance group Ob.d.L. As reserve 130 engines has been delivered to LE. The rest is for Bf 109 F-1, F-2 and the Messerschmittproduction Bf 110."

Page 29:
"6.11.40 (GL) ... Genst. requests that 601N favorly be fitted in Bf 109. to make the engines available, Genst. agrees to let 2 month deliveries of Bf 110 be fitted with 601 A instead of 601 N, if the bf 109 equipped with 601 N can be ensured. Following positions must get N-engines:
1.) ending series of Bf 109 E
2.) Reserve engines for III./ZG 26, Erprobungsgruppe 210.
If not enough engines available, following groups doesn't need to be supplyed with 601 N respectively 601 N can be changed to 601 A engines: II./ZG 26, II./ZG 76. Since the delivery of 601 N in january will be higher, the Bf 110 production will switch to 601 N engines."

Last edited by Kodoss; 06-10-2012 at 01:36 PM.
Reply With Quote
  #7  
Old 06-10-2012, 05:16 PM
Kurfürst Kurfürst is offline
Approved Member
 
Join Date: Oct 2007
Posts: 705
Default

See also (and vote if possible) at:

Feature #200 - Missing 100 octane subtypes of Bf 109E and Bf 110C
http://www.il2bugtracker.com/issues/200
__________________
Il-2Bugtracker: Feature #200: Missing 100 octane subtypes of Bf 109E and Bf 110C http://www.il2bugtracker.com/issues/200
Il-2Bugtracker: Bug #415: Spitfire Mk I, Ia, and Mk II: Stability and Control http://www.il2bugtracker.com/issues/415

Kurfürst - Your resource site on Bf 109 performance! http://kurfurst.org
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 10:09 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.