Code:
Note: usage example float health = (float)aircraft.getParameter(part.ParameterTypes.M_Health, -1);
ParameterTypes {
#region Nil
/// <summary>
/// Nil parameter. Always shows -999.999d.
/// </summary>
Nil,
#endregion
#region Miscellaneous
/// <summary>
/// [Random Value]
/// <para>Generic subtype (-1) indicates a random number in [0.0, 1.0];</para>
/// <para>All other subtypes indicate a random number in [-1.0, 1.0].</para>
/// <para>Also serves as an indicator to an undefined activity.</para>
/// </summary>
M_Random,
/// <summary>
/// [Shake Level]
/// <para>Indicates current machine/camera shake gain.</para>
/// <para>Applies only when Head Shake difficulty option is set to on.</para>
/// </summary>
M_Shake,
/// <summary>
/// [Cabin Damage Flags]
/// <para>Indicates 1.0 when the cabin damage flag with a number of subtype is set, otherwise 0.0.</para>
/// <para>Subtype can only be in range from 0 to 14 as it mirrors to CockpitDamageFlag## of NamedDamageTypes.</para>
/// </summary>
M_CabinDamage,
/// <summary>
/// [Cabin and Camera State]
/// <para>Subtype 31 - Indicates 1.0 when the camera is in aiming sight periscope mode;</para>
/// <para>Subtype 32 - Indicates 1.0 when the view point is raised seat mode.</para>
/// </summary>
M_CabinState,
/// <summary>
/// [Named Damage Flags]
/// <para>Indicates 1.0 when the corresponding damage flag is set, otherwise 0.0.</para>
/// <para>Refer to <code>NamedDamageTypes</code> for damage flags reference.</para>
/// </summary>
M_NamedDamage,
/// <summary>
/// [Systematic Wear]
/// <para>Indicates corresponding system wear state; [0.0, 1.0]; 1.0 means completely worn and written off system.</para>
/// <para>Subtype 0 shows airframe wear;</para>
/// <para>Subtype 1 shows controls and control lines wear;</para>
/// <para>Subtype 2 shows undercarriage wear;</para>
/// <para>Subtype 3 shows landing flaps wear;</para>
/// <para>Subtype 4 shows pneumatic system wear;</para>
/// <para>Subtype 5 shows hydraulic system wear;</para>
/// <para>Subtype 6 shows electrical system wear;</para>
/// <para>Subtype 7 shows auxilaries;</para>
/// <para>Subtypes 8 to 15 show corresponding engine (#0 - #7) wear level;</para>
/// </summary>
M_SystemWear,
/// <summary>
/// [Health]
/// <para>Indicates appx. health level of the machine; [0.0, 1.0].</para>
/// </summary>
M_Health,
#endregion
#region Controls
#region Controls - Machine Generic
/// <summary>
/// [Steering Control]
/// <para>Indicates current steering control (input) of the machine; [-1.0, 1.0].</para>
/// </summary>
C_Steering,
/// <summary>
/// [Wheel Brake Control]
/// <para>Indicates wheel brakes control; [0.0, 1.0].</para>
/// <para>Generic subtype (-1) shows overall brake control input;</para>
/// <para>Subtype 0 shows left side brakes;</para>
/// <para>Subtype 1 shows right side brakes.</para>
/// </summary>
C_Brake,
/// <summary>
/// [Throttle Control]
/// <para>Indicates engine throttle control; [0.0, 1.0], on some types [0.0, 1.1].</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_Throttle,
/// <summary>
/// [Trigger Control]
/// <para>Indicates 1.0 when the corresponding trigger is pressed.</para>
/// <para>Trigger # is equal to subtype.</para>
/// <para>The trigger # is counted within the machine, not the controlling puppet.</para>
/// </summary>
C_Trigger,
#endregion
#region Controls - Machine Engine(s)
/// <summary>
/// [Propellor / Pitch Control]
/// <para>Indicates engine prop. control; [0.0, 1.0].</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_Pitch,
/// <summary>
/// [Mix Control]
/// <para>Indicates engine mix control; [0.0, 1.0].</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_Mix,
/// <summary>
/// [Water / Air Radiator Control]
/// <para>Indicates engine radiator control; [0.0, 1.0].</para>
/// <para>For inline engines shows water radiator control;</para>
/// <para>for radial engines shows cowl flaps control.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_WaterRadiator,
/// <summary>
/// [Oil Radiator Control]
/// <para>Indicates engine oil radiator control; [0.0, 1.0].</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_OilRadiator,
/// <summary>
/// [Radiator Automation Control]
/// <para>Indicates 1.0 when radiator control is automatic.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_RadiatorAutomation,
/// <summary>
/// [Propellor / Pitch Automation Control]
/// <para>Indicates 1.0 when prop. control is automatic.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_PitchAutomation,
/// <summary>
/// [Engine Compressor Control]
/// <para>Indicates selected compressor stage.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_Compressor,
/// <summary>
/// [Afterburner / W.E.P. Control]
/// <para>Indicates 1.0 when afterburner / W.E.P. is engaged.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_Afterburner,
/// <summary>
/// [Boost Cut-Out Control]
/// <para>Indicates 1.0 when engine boost cut-out control is engaged.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_BoostEnabler,
/// <summary>
/// [Slow-Running Cut-Out]
/// <para>Indicates 1.0 when engine slow-running cut-out control is engaged.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_SlowRunningCutOut,
/// <summary>
/// [Magnetos Control]
/// <para>Indicates magnetos switch(es).</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_Magneto,
/// <summary>
/// [Feather Control]
/// <para>Indicates propellor feather control.</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_Feather,
/// <summary>
/// [Carburetter / Intake Heater Control]
/// <para>Indicates engine carb. heater control; [0.0, 1.0].</para>
/// <para>Generic subtype (-1) shows control for the current motor selection;</para>
/// <para>Other subtypes show control in the corresponding individual motor.</para>
/// </summary>
C_CarbHeater,
#endregion
#region Controls - Machine Systems
/// <summary>
/// [Hatch / Cabin Door Control]
/// <para>Indicates hatch control of the given puppet.</para>
/// <para>Subtype equals puppet index.</para>
/// </summary>
C_HatchDoor,
/// <summary>
/// [Canopy / Cabin Door Jettison Control]
/// <para>Indicates jettison control of the given puppet.</para>
/// <para>Subtype equals puppet index.</para>
/// </summary>
C_HatchJettison,
/// <summary>
/// [Stopwatch Control]
/// <para>Indicates selected stopwatch mode.</para>
/// </summary>
C_Timer,
#endregion
#region Controls - Aircraft Direction
/// <summary>
/// [Ailerones Control]
/// <para>Indicates ailerones contol input; [-1.0, 1.0].</para>
/// <para>Positive control is roll right.</para>
/// </summary>
C_Aileron,
/// <summary>
/// [Elevator Control]
/// <para>Indicates elevator control input; [-1.0, 1.0].</para>
/// <para>Positive control is nose up.</para>
/// </summary>
C_Elevator,
/// <summary>
/// [Rudder Control]
/// <para>Indicates rudder control input; [-1.0, 1.0].</para>
/// <para>Positive control is turn right.</para>
/// </summary>
C_Rudder,
/// <summary>
/// [Ailerones Trim Control]
/// <para>Indicates ailerones trim contol input.</para>
/// <para>Positive control is roll right.</para>
/// </summary>
C_AileronTrim,
/// <summary>
/// [Elevator Trim Control]
/// <para>Indicates elevator trim control input.</para>
/// <para>Positive control is nose up.</para>
/// </summary>
C_ElevatorTrim,
/// <summary>
/// [Rudder Trim Control]
/// <para>Indicates rudder trim control input.</para>
/// <para>Positive control is turn right.</para>
/// </summary>
C_RudderTrim,
/// <summary>
/// [Tail Wheel Steer Lock Control]
/// <para>Indicates 1.0 when tail lock control is engaged.</para>
/// </summary>
C_TailwheelLock,
#endregion
#region Controls - Aircraft Systems
/// <summary>
/// [Landing Flaps Control]
/// <para>Indicates selected landing flaps position index ([0, N]);</para>
/// <para>or direction ({0 neutral, 11 in, 12 out}).</para>
/// </summary>
C_LandingFlap,
/// <summary>
/// [Leading Edge Slats Control]
/// <para>Indicates leading edge slats control; [0.0, 1.0].</para>
/// </summary>
C_LeadingEdgeSlats,
/// <summary>
/// [Undercarriage Extension Control]
/// <para>Indicates selected undercarriage position index ([0, N]);</para>
/// <para>or direction ({0 neutral, 11 in, 12 out}).</para>
/// </summary>
C_Undercarriage,
/// <summary>
/// [Undercarriage Emergency System Control]
/// <para>Indicates selected undercarriage emergency control position index.</para>
/// </summary>
C_UndercarriageEmergency,
/// <summary>
/// [Bomb Bay Doors Control]
/// <para>Indicates selected bomb bay doors opening position ([0.0, 1.0]);</para>
/// <para>or direction ({0.0 neutral, 0.5 in, 1.0 out}).</para>
/// </summary>
C_BombBayDoor,
/// <summary>
/// [Airbrake Control]
/// <para>Indicates selected airbrake position index ([0, N]);</para>
/// <para>or direction ({0 neutral, 11 in, 12 out}).</para>
/// </summary>
C_Airbrake,
/// <summary>
/// [Fuel Tank Switch / Fuel Cock Control]
/// <para>Indicates selected fuel cock position index.</para>
/// <para>Subtype equals fuel cock index in machine.</para>
/// </summary>
C_FuelTankSelector,
/// <summary>
/// [Control for Telepirometro Elettrico / Cylinder Head Temp. Sender Selector]
/// <para>Indicates telepirometro elettrico position.</para>
/// </summary>
C_TelepirometroElettrico,
/// <summary>
/// [Altimeter Pinion]
/// <para>Indicates altimeter pressure setter knob position.</para>
/// </summary>
C_AltimeterPinion,
/// <summary>
/// [Anemometro / Speed Dial Rotation Control]
/// <para>Indicates velocity indicator shift in degrees.</para>
/// </summary>
C_AnemometroPinion,
/// <summary>
/// [Bomb Sight Controls]
/// <para>Indicates bomb sight input controls.</para>
/// <para>Subtype 0 shows velocity, preset units;</para>
/// <para>Subtype 1 shows altitude, preset units;</para>
/// <para>Subtype 2 shows slip, preset units;</para>
/// <para>Subtype 3 shows distance, preset units;</para>
/// <para>Subtype 4 indicates 1.0 when automatic control is engaged.</para>
/// </summary>
C_BombSight,
/// <summary>
/// [Aiming Sight / Acemaker Controls]
/// <para>Indicates gun sight input controls.</para>
/// <para>Subtype 0 shows distance, preset units;</para>
/// <para>Subtype 1 shows side / auxilary input, preset units;</para>
/// <para>Subtype 2 shows dimmer plate control.</para>
/// </summary>
C_Sight,
/// <summary>
/// [Bombenabwurfgerat]
/// <para>Indicates bomb distributor controls.</para>
/// <para>Subtype 0 shows mode index in modes list;</para>
/// <para>Subtype 1 indicates 1.0 when bomb arming is on;</para>
/// <para>Subtype 2 shows selected slot (-1.0 points to all slots);</para>
/// <para>Subtype 3 shows series length (-1.0 point to max length);</para>
/// <para>Subtype 4 shows delay (between bombs in series);</para>
/// <para>Subtype 5 indicates 1.0 when in dive short delay mode;</para>
/// <para>Subtype 6 shows mode ({0 single, 1 series, 2 salvo}).</para>
/// </summary>
C_Bombenabwurfgerat,
/// <summary>
/// [Fuel Contents Indicator Control]
/// <para>Indicates selected indicator switch position.</para>
/// </summary>
C_KraftstoffSelector,
/// <summary>
/// [Riquid Reserve Indicator 0 Control]
/// <para>Indicates selected indicator switch position.</para>
/// </summary>
C_LiquidGauge0,
/// <summary>
/// [Riquid Reserve Indicator 1 Control]
/// <para>Indicates selected indicator switch position.</para>
/// </summary>
C_LiquidGauge1,
/// <summary>
/// [Primary Light Switch]
/// <para>Indicates lighting switch position.</para>
/// <para>Subtype equals puppet index in machine.</para>
/// </summary>
C_PriLights,
/// <summary>
/// [Secondary Light Switch]
/// <para>Indicates lighting switch position.</para>
/// <para>Subtype equals puppet index in machine.</para>
/// </summary>
C_SecLights,
/// <summary>
/// [Gunsight Light Switch]
/// <para>Indicates lighting switch position.</para>
/// </summary>
C_SightLights,
/// <summary>
/// [Pitot Heater Switch]
/// <para>Indicates 1.0 when pitot heater is switched on.</para>
/// </summary>
C_PitotHeater,
/// <summary>
/// [Hydraulic Hand Pump Lever]
/// <para>Indicates position of emergency hand pump; [0.0, 1.0].</para>
/// </summary>
C_Handpumpe,
/// <summary>
/// [Transciever Frequency]
/// <para>Indicates selected transciever frequency.</para>
/// </summary>
C_RadTXRX,
/// <summary>
/// [Primary Navigation Frequency]
/// <para>Indicates selected primary frequency on navigation equipment.</para>
/// </summary>
C_RadPriNav,
/// <summary>
/// [Secondary Navigation Frequency]
/// <para>Indicates selected secondary frequency on navigation equipment.</para>
/// </summary>
C_RadSecNav,
/// <summary>
/// [Kurssteuerung / Course Autopilot Controls]
/// <para>Indicates kurssteuerung input.</para>
/// <para>Subtype 0 shows mode of operation;</para>
/// <para>Subtype 1 shows preset course;</para>
/// <para>Subtype 2 indicates 1.0 when temp. disengage switch is on.</para>
/// </summary>
C_Kurssteuerung,
#endregion
#endregion
#region Parameters
#region Parameters - Machine Animation - Directional
/// <summary>
/// [Steering Animation]
/// <para>Indicates machine steering mechanism position; [-1.0, 1.0].</para>
/// </summary>
A_Steering,
/// <summary>
/// [Wheel Brake Animation]
/// <para>Indicates wheel brakes position; [0.0, 1.0].</para>
/// <para>Generic subtype (-1) shows overall brakes gain;</para>
/// <para>Subtype 0 shows left brakes;</para>
/// <para>Subtype 1 shows right brakes.</para>
/// </summary>
A_Brake,
/// <summary>
/// [Ailerones Animation]
/// <para>Indicates ailerones position; [-1.0, 1.0].</para>
/// </summary>
A_Aileron,
/// <summary>
/// [Elevator Animation]
/// <para>Indicates elevator position; [-1.0, 1.0].</para>
/// </summary>
A_Elevator,
/// <summary>
/// [Rudder Animation]
/// <para>Indicates rudder position; [-1.0, 1.0].</para>
/// </summary>
A_Rudder,
/// <summary>
/// [Ailerones Trim Animation]
/// <para>Indicates ailerones trim position / flap deflection.</para>
/// </summary>
A_AileronTrim,
/// <summary>
/// [Elevator Trim Animation]
/// <para>Indicates elevator trim position / flap deflection.</para>
/// </summary>
A_ElevatorTrim,
/// <summary>
/// [Rudder Trim Animation]
/// <para>Indicates rudder trim position / flap deflection.</para>
/// </summary>
A_RudderTrim,
#endregion
#region Parameters - Machine Animation - Systematic
/// <summary>
/// [Undercarriage Extension Animation]
/// <para>Indicates undercarriage strut movement extension-wise; [0.0, 1.0].</para>
/// <para>Subtype points to the number of strut in machine.</para>
/// </summary>
A_Undercarriage,
/// <summary>
/// [Undercarriage Shock Animation]
/// <para>Indicates strut shock travel in meters.</para>
/// <para>Subtype points to the number of strut in machine.</para>
/// </summary>
A_UndercarriageShock,
/// <summary>
/// [Wheel Rotatory Movement Animation]
/// <para>Indicates angle of wheel.</para>
/// </summary>
A_UndercarriageWheel,
/// <summary>
/// [Canopy / Door Opening Animation]
/// <para>Indicates animation phase of canopy or door during opening / closing; [0.0, 1.0].</para>
/// <para>Subtype equals to hatch index in machine's list.</para>
/// </summary>
A_HatchDoor,
/// <summary>
/// [Bomb Bay Doors Opening Animation]
/// <para>Indicates bomb bay(s) doors opening phase; [0.0 1.0].</para>
/// </summary>
A_BombBayDoor,
/// <summary>
/// [Wind Generator Impeller Rotatory Animation]
/// <para>Indicates wind generator impeller angle in degrees.</para>
/// </summary>
A_ImpellerAngle,
/// <summary>
/// [Wind Generator Impeller's Angular Velocity]
/// <para>Indicates wind generator angular velocity in degrees / second.</para>
/// </summary>
A_ImpellerAngularVelocity,
/// <summary>
/// [Wind Generator Strut Extension Animation]
/// <para>Indicates impeller strut extension phase; [0.0, 1.0].</para>
/// </summary>
A_ImpellerUnfold,
/// <summary>
/// [Landing Flaps Extension Animation]
/// <para>Indicates landing flaps' extension; [0.0 1.0].</para>
/// <para>Generic subtype (-1) shows average position of all flaps;</para>
/// <para>Subtype 0 shows extension of left flap;</para>
/// <para>Subtype 1 shows extension of right flap.</para>
/// </summary>
A_LandingFlap,
/// <summary>
/// [Airbrake Extension Animation]
/// <para>Indicates airbrake extension; [0.0, 1.0].</para>
/// </summary>
A_Airbrake,
/// <summary>
/// [Engine Cowling Flaps Animation]
/// <para>Indicates cowling flaps extension; [0.0, 1.0].</para>
/// <para>Subtype points to engine number.</para>
/// </summary>
A_EngineAirRadiator,
/// <summary>
/// [Engine Water Radiator Flap Animation]
/// <para>Indicates water radiator opening; [0.0, 1.0].</para>
/// <para>Subtype points to engine number.</para>
/// </summary>
A_EngineWaterRadiator,
/// <summary>
/// [Engine Oil Radiator Flap Animation]
/// <para>Indicates oil radiator opening; [0.0, 1.0].</para>
/// <para>Subtype points to engine number.</para>
/// </summary>
A_EngineOilRadiator,
/// <summary>
/// [Leading Edge Slat Extension Animation]
/// <para>Indicates leading-edge slats' extension; [0.0, 1.0].</para>
/// <para>Generic subtype (-1) shows average position of both slats;</para>
/// <para>Subtype 0 shows extension on the left wing;</para>
/// <para>Subtype 1 shows extension on the right wing.</para>
/// </summary>
A_LeadingEdgeSlat,
#endregion
#region Parameters - Machine Spatial
/// <summary>
/// [Misc.: Machine Spatial Coordinates]
/// <para>Indicates machine position in world coordinates.</para>
/// <para>Subtype 0 shows X-coordinate;</para>
/// <para>Subtype 1 shows Y-coordinate;</para>
/// <para>Subtype 2 shows Z-coordinate.</para>
/// </summary>
Z_Coordinates,
/// <summary>
/// [Misc.: Machine Spatial Orientation]
/// <para>Indicates machine orientation, angles are in degrees.</para>
/// <para>Subtype 0 shows yaw (0 degrees point E);</para>
/// <para>Subtype 1 shows pitch (nose-up is negative);</para>
/// <para>Subtype 2 shows roll (right roll is positive).</para>
/// </summary>
Z_Orientation,
/// <summary>
/// [Misc.: Machine Overload under Acceleration]
/// <para>Indicates overload in m/s/s.</para>
/// <para>Generic subtype (-1) shows accelerometer, being 0 under normal conditions;</para>
/// <para>Subtype 0 shows acceleraton along machine's X axis;</para>
/// <para>Subtype 1 shows acceleraton along machine's Y axis;</para>
/// <para>Subtype 2 shows acceleraton along machine's Z axis.</para>
/// </summary>
Z_Overload,
/// <summary>
/// [Misc.: Machine Altitude AGL]
/// <para>Indicates machine elevation above ground level in meters.</para>
/// </summary>
Z_AltitudeAGL,
/// <summary>
/// [Misc.: Machine Altitude MSL]
/// <para>Indicates machine elevation above 0.0 Z-plane.</para>
/// </summary>
Z_AltitudeMSL,
/// <summary>
/// [Misc.: Machine's Velocity in Air]
/// <para>Indicates machine's aerial velocity.</para>
/// <para>Generic subtype (-1) shows velocity length;</para>
/// <para>Subtype 0 shows aerial flow along machine's X-axis;</para>
/// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para>
/// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para>
/// </summary>
Z_VelocityIAS,
/// <summary>
/// [Misc.: Machine's Velocity in World Coordinates]
/// <para>Indicates machine's absolute velocity.</para>
/// <para>Generic subtype (-1) shows velocity length;</para>
/// <para>Subtype 0 shows machine's speed along world's X-coordinate;</para>
/// <para>Subtype 1 shows machine's speed along world's Y-coordinate;</para>
/// <para>Subtype 2 shows machine's speed along world's Z-coordinate.</para>
/// </summary>
Z_VelocityTAS,
/// <summary>
/// [Misc.: Machine's Mach Factor]
/// <para>Indicates machine's aerial velocity devided by sonic speed.</para>
/// <para>Generic subtype (-1) shows velocity length;</para>
/// <para>Subtype 0 shows aerial flow along machine's X-axis;</para>
/// <para>Subtype 1 shows aerial flow along machine's Y-axis;</para>
/// <para>Subtype 2 shows aerial flow along machine's Z-axis.</para>
/// </summary>
Z_VelocityMach,
/// <summary>
/// [Misc.: Ambient Temperature]
/// <para>Indicates air temperature around machine's location, in K.</para>
/// </summary>
Z_AmbientAirTemperature,
#endregion
#region Parameters - Machine Systems
/// <summary>
/// [Electrical System Point Voltage]
/// <para>Indicates current system voltage taken on gen.-battery bridge, in V.</para>
/// </summary>
S_ElectricVoltage,
/// <summary>
/// [Electrical System Incandescing Ratio]
/// <para>Indicates incandescing bulbs gain factor under current system voltage; [0.0, 1.0].</para>
/// <para>Used to vivify lightning SFX.</para>
/// </summary>
S_ElectricIncandescingRatio,
/// <summary>
/// [Electical System Amperage]
/// <para>Indicates current flow.</para>
/// <para>Subtype 0 shows flow in generator loom;</para>
/// <para>Subtype 1 shows flow in battery loom;</para>
/// <para>Subtype 2 shows flow in consumer loom.</para>
/// </summary>
S_ElectricAmperage,
/// <summary>
/// [Primary Pit Lightning]
/// <para>Indicates primary pit lights gain factor for given puppet.</para>
/// </summary>
S_ElectricPrimaryPitLight,
/// <summary>
/// [Secondary Pit Lightning]
/// <para>Indicates secondary pit lights gain factor for given puppet.</para>
/// </summary>
S_ElectricSecondaryPitLight,
/// <summary>
/// [Gunsight Lightning]
/// <para>Indicates gunsight / reticle lightning gain factor.</para>
/// </summary>
S_ElectricSightLight,
/// <summary>
/// [Fuel Reserve]
/// <para>Indicates machine's fuel reserve, kgs.</para>
/// <para>Generic subtype (-1) shows total reserve;</para>
/// <para>Subtype N shows reserve in the given fuel tank.</para>
/// </summary>
S_FuelReserve,
/// <summary>
/// [Hatch Position]
/// <para>Indicates given hatch opening phase, [0.0, 1.0].</para>
/// <para>Subtype points to hatch number in machine's list.</para>
/// </summary>
S_HatchDoor,
#endregion
#region Parameters - Aircraft Systems
/// <summary>
/// [Undercarriage Master Valve]
/// <para>Indicates position of undercarriage hydraulic valve ({0 up, 1 down, 2 neutral, 3 neutral}).</para>
/// </summary>
S_UndercarriageValve,
/// <summary>
/// [Pneumatic Container Pressure]
/// <para>Indicates current container pressure in machine's set units of measure.</para>
/// <para>Subtype 0 shows pressure in primary container;</para>
/// <para>Subtype 1 shows pressure in secondary container.</para>
/// </summary>
S_PneumoContainerPressure,
/// <summary>
/// [Pneumatic Line Pressure(s)]
/// <para>Indicates pressure in given pneumatic line.</para>
/// <para>Generic subtype (-1) shows nominal system pressure;</para>
/// <para>Subtype 0 shows compressor line pressure;</para>
/// <para>Subtype 1 shows secondary pressure;</para>
/// <para>Subtype 2 shows flaps line pressure;</para>
/// <para>Subtype 3 shows undercarriage line pressure;</para>
/// <para>Subtype 4 shows wheel brakes line pressure.</para>
/// </summary>
S_PneumoLinePressure,
/// <summary>
/// [Hydro System Pressure(s)]
/// <para>Indicates pressure in given hydro line.</para>
/// <para>Generic subtype (-1) shows compressor line pressure;</para>
/// <para>Subtype 0 shows nominal system pressure;</para>
/// <para>Subtype 1 shows pressure in emergency discharge container.</para>
/// </summary>
S_HydroPressure,
/// <summary>
/// [Hydro System Reservoir]
/// <para>Indicates reservoir contents, kgs.</para>
/// </summary>
S_HydroReserve,
/// <summary>
/// [Sturzanlage Mode of Operation]
/// <para>Indicates mode ({0 cruise, 1 dive, 2 bomb drop, 3 recovery, 4 automation reset, 5 automation switch to cruise}).</para>
/// </summary>
S_Sturzanlage,
/// <summary>
/// [Gun Mode of Operation]
/// <para>Indicates mode of given gun ({0 dismantled, 1 ready, 2 firing, 3 reloading, 4 jammed}).</para>
/// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para>
/// </summary>
S_GunOperation,
/// <summary>
/// [Gun Ammo Reserve]
/// <para>Indicates current number of bullets in gun storage.</para>
/// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para>
/// </summary>
S_GunReserve,
/// <summary>
/// [Gun Clip Reserve]
/// <para>Indicates number of bullets in current gun loaded clip / ammo box.</para>
/// <para>Subtype points to gun attachment hook (looking up gun on hook named [_Gun+subtype]).</para>
/// </summary>
S_GunClipReserve,
/// <summary>
/// [Bomb Spawn Ammo Reserve]
/// <para>Indicates number of bombs in bombgun storage.</para>
/// <para>Subtype points to attachment hook (looking up gun on hook named [_Bomb+subtype]).</para>
/// </summary>
S_BombReserve,
/// <summary>
/// [Fenster Opening]
/// <para>Indicates fenster opening, [0.0, 1.0].</para>
/// </summary>
S_Fenster,
/// <summary>
/// [Pitot Heater]
/// <para>Indicates pitot heater gain ratio.</para>
/// </summary>
S_PitotHeater,
/// <summary>
/// [Bombenabwurfgerat]
/// <para>Indicates machine bomb distributor parameters.</para>
/// <para>Generic subtype (-1) shows mode ({0 single, 1 series, 2 salvo});</para>
/// <para>Subtype 0 shows mode ({0 single, 1 series, 2 salvo});</para>
/// <para>Subtype 1 shows 1.0 if arming is on;</para>
/// <para>Subtype 2 shows selected slot (-1 if all slots selected);</para>
/// <para>Subtype 3 shows series length (-1 if all bombs selected);</para>
/// <para>Subtype 4 shows 1.0 if short / dive delay is on;</para>
/// <para>Subtype 9 shows 1.0 while abwurfgerat is in bomb drop operation.</para>
/// </summary>
S_Bombenabwurfgerat,
/// <summary>
/// [Turret]
/// <para>Indicates machine turret parameters.</para>
/// <para>Subtype digit 1 stands for puppet #; Subtype digit 2 stands turret index in given puppet;</para>
/// <para>Subtype digit 3: 0 - Unfold, 1 - Lower Lock, 2 - Mount Yaw, 3 - Upper Lock,</para>
/// <para> 4 - Mount Pitch, 5 - Swivel Yaw, 6 - Swivel Pitch.</para>
/// <para>Ex.: 105 - Swivel yaw on main turret of puppet #1.</para>
/// </summary>
S_Turret,
#endregion
#region RESERVED PLACEHOLDERS
M_Reserved000,
M_Reserved001,
M_Reserved002,
M_Reserved003,
M_Reserved004,
M_Reserved005,
M_Reserved006,
M_Reserved007,
M_Reserved008,
M_Reserved009,
M_Reserved00A,
M_Reserved00B,
M_Reserved00C,
M_Reserved00D,
M_Reserved00E,
M_Reserved00F,
M_Reserved010,
M_Reserved011,
M_Reserved012,
M_Reserved013,
M_Reserved014,
M_Reserved015,
M_Reserved016,
M_Reserved017,
M_Reserved018,
M_Reserved019,
M_Reserved01A,
M_Reserved01B,
M_Reserved01C,
M_Reserved01D,
M_Reserved01E,
M_Reserved01F,
#endregion
#region Parameters - Instrumentation
#region Instrumentation - Assorted
/// <summary>
/// [Inst: Timer]
/// <para>Returns timer reading.</para>
/// <para>Generic subtype (-1) shows clock / time of day, hours, [0.0, 24.0);</para>
/// <para>Subtype 0 shows stopwatch reading, seconds.</para>
/// </summary>
I_Timer, // NB: I_Timer works as a separator for all I_* types, must be on top of instrumentation section
/// <summary>
/// [Inst: Ambient Temperature]
/// <para>Returns ambient temperature gauge reading.</para>
/// </summary>
I_AmbientTemp,
#endregion
#region Instrumentation - Engine
/// <summary>
/// [Inst: Engine RPM]
/// <para>Returns engine RPM gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineRPM,
/// <summary>
/// [Inst: Engine Manifold Pressure]
/// <para>Returns engine manifold press. gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineManPress,
/// <summary>
/// [Inst: Engine Boost Pressure]
/// <para>Returns boost gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineBoostPress,
/// <summary>
/// [Inst: Engine Water Pressure]
/// <para>Returns water press. gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineWatPress,
/// <summary>
/// [Inst: Engine Oil Pressure]
/// <para>Returns oil pressure gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineOilPress,
/// <summary>
/// [Inst: Engine Fuel Pressure]
/// <para>Returns fuel pressure gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineFuelPress,
/// <summary>
/// [Inst: Engine Water Temperature]
/// <para>Returns water temp. gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineWatTemp,
/// <summary>
/// [Inst: Engine Water Radiator Temperature]
/// <para>Returns water temp. (rad. outlet) gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineRadTemp,
/// <summary>
/// [Inst: Engine Oil Temperature]
/// <para>Returns oil temp. gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineOilTemp,
/// <summary>
/// [Inst: Engine Oil Radiator Temperature]
/// <para>Returns oil temp. (rad. outlet) gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineOilRadiatorTemp,
/// <summary>
/// [Inst: Cylinders Head Temperature]
/// <para>Returns cyl. head temp. gauge reading.</para>
/// <para>Generic subtype (-1) shows combined / telepirometro elettrico reading;</para>
/// <para>Other subtypes point to engine number in machine's list.</para>
/// </summary>
I_EngineTemperature,
/// <summary>
/// [Inst: Carburettor Temperature]
/// <para>Returns carb. air temp. gauge reading.</para>
/// <para>Subtype points to engine number in machine's list.</para>
/// </summary>
I_EngineCarbTemp,
/// <summary>
/// [Inst: Propellor Pitch]
/// <para>Returns prop. pitch indicator reading ([0.0, 12.0] for clockwork type).</para>
/// </summary>
I_Pitch,
#endregion
#region Instrumentation - Machine Spatial
/// <summary>
/// [Inst: Velocity]
/// <para>Returns velocity indicator reading.</para>
/// </summary>
I_VelocityIAS,
/// <summary>
/// [Inst: Altitude]
/// <para>Returns altitude indicator reading.</para>
/// </summary>
I_Altitude,
/// <summary>
/// [Inst: Variometer]
/// <para>Returns variometer / climb velocity indicator reading.</para>
/// </summary>
I_Variometer,
/// <summary>
/// [Inst: Slip Indicator]
/// <para>Returns slip indicator reading.</para>
/// <para>Generic subtype (-1) shows machine's indicator reading;</para>
/// <para>Sybtype N shows slip value clamped to [-N, N] range.</para>
/// </summary>
I_Slip,
/// <summary>
/// [Inst: Magnetic Compass]
/// <para>Returns magnetic compass parameters.</para>
/// <para>Generic subtype (-1) shows compass gauge reading, [0.0, 360.0];</para>
/// <para>Subtype 0 shows azimuth taken off compass card;</para>
/// <para>Subtype 1 shows card pitch;</para>
/// <para>Subtype 2 shows card roll.</para>
/// </summary>
I_MagneticCompass,
/// <summary>
/// [Inst: Repeater Compass]
/// <para>Returns repeater compass parameters.</para>
/// <para>Generic subtype (-1) shows reading on the gauge, [0.0, 360.0];</para>
/// <para>Subtype 0 shows master compass card heading;</para>
/// <para>Subtype 1 shows master compass card pitch;</para>
/// <para>Subtype 2 shows master compass card roll.</para>
/// </summary>
I_RepeaterCompass,
/// <summary>
/// [Inst: Peilzeiger]
/// <para>Returns course setter preset, [0.0, 360.0].</para>
/// </summary>
I_Peilzeiger,
#endregion
#region Instrumentation - Machine Systems
/// <summary>
/// [Inst: Fuel Reserve]
/// <para>Returns fuel level indicator reading.</para>
/// <para>Generic subtype (-1) shows combined reading in all tanks / controlled by selector switch;</para>
/// <para>Other subtypes point to fuel tank number in machine's list.</para>
/// </summary>
I_FuelReserve,
/// <summary>
/// [Inst. Liquid Matter Reserve]
/// <para>Returns liquid level gauge reading.</para>
/// <para>Subtype 0 shows reading of gauge # 0;</para>
/// <para>Subtype 1 shows reading of gauge # 1.</para>
/// </summary>
I_LiquidReserve,
/// <summary>
/// [Inst: Voltamperemeter]
/// <para>Returns voltamperemeter reading.</para>
/// </summary>
I_Voltamperemeter,
/// <summary>
/// [Inst: Voltmeter]
/// <para>Returns voltmeter reading.</para>
/// </summary>
I_Voltmeter,
/// <summary>
/// [Inst: Amperemeter]
/// <para>Returns Amperemeter reading.</para>
/// </summary>
I_Amperemeter,
/// <summary>
/// [Inst: Hydraulic System Pressure]
/// <para>Returns hydro. press. gauge reading.</para>
/// </summary>
I_HydroPressure,
/// <summary>
/// [Inst: Hydraulic Emergency Container Pressure]
/// <para>Returns hydro. emergency discharge container press. gauge reading.</para>
/// </summary>
I_HydroEmPressure,
#endregion
#region Instrumentation - Gyro Gauges
/// <summary>
/// [Inst: Turn Indicator]
/// <para>Returns turn indicator deflection, [-1.2, 1.2].</para>
/// </summary>
I_Turn,
/// <summary>
/// [Inst: Artificial Horizon]
/// <para>Returns artificial horizon parameters.</para>
/// <para>Subtype 1 shows pitch;</para>
/// <para>Subtype 2 shows roll.</para>
/// </summary>
I_AH,
/// <summary>
/// [Inst: DI]
/// <para>Returns DI reading, [0.0, 360.0].</para>
/// <para>Generic subtype (-1) shows gauge reading;</para>
/// <para>Subtype 1 shows DI pinion shift.</para>
/// </summary>
I_DirectionIndicator,
/// <summary>
/// [Inst: Slaved Compass]
/// <para>Returns slaved compass (GMK) reading, [0.0, 360.0].</para>
/// </summary>
I_SlavedCompass,
/// <summary>
/// [Inst: Suction]
/// <para>Returns gyro suction gauge reading.</para>
/// </summary>
I_Suction,
#endregion
#region Instrumentation - Radio Equipment
/// <summary>
/// [Inst: Lorenz AFN]
/// <para>Returns Lorenz AFN indicator readings.</para>
/// <para>Generic subtype (-1) shows indicated deviation, [-1.0, 1.0];</para>
/// <para>Subtype 1 shows signal gain level, [0.0, 1.0];</para>
/// <para>Subtype 2 shows detected marker station tone frequency, otherwise 0.0.</para>
/// </summary>
I_AFN,
/// <summary>
///[*]
/// </summary>
I_ADF,
/// <summary>
///[*]
/// </summary>
I_RDF,
/// <summary>
///[*]
/// </summary>
I_RMI,
/// <summary>
/// [Inst: Fixed Loop Radio Compass]
/// <para>Returns FLRC indicator reading, [-1.0, 1.0];</para>
/// </summary>
I_FLRC,
/// <summary>
/// [Inst: Kurssteuerung]
/// <para>Returns course autopilot parameters.</para>
/// <para>Generic subtype (-1) shows kurssteuerung mode, {0, 1, 2};</para>
/// <para>Subtype 1 shows indicated deviation, [-1.0, 1.0];</para>
/// <para>Subtype 2 shows preset course, [0.0, 360.0].</para>
/// </summary>
I_Kurssteuerung,
#endregion
#region Instrumentation - Bomb Sight
/// <summary>
/// [Inst: Bombsight]
/// <para>Returns bomb sight parameters.</para>
/// <para>Subtype 0 shows velocity, m/s;</para>
/// <para>Subtype 1 shows altitude, m;</para>
/// <para>Subtype 2 shows side slip, deg;</para>
/// <para>Subtype 3 shows elevation angle, deg;</para>
/// <para>Subtype 4 shows distance, m;</para>
/// <para>Subtype 5 shows gyro readyness, [0.0, 1.0];</para>
/// <para>Subtype 6 shows 1.0 if automation is on;</para>
/// <para>Subtype 7 shows 1.0 while dropping bombs;</para>
/// <para>Subtype 8 shows gyro platform pitch, deg;</para>
/// <para>Subtype 9 shows gyro platform roll, deg;</para>
/// </summary>
I_BombSight,
#endregion
#endregion
#endregion
}
04-02-2012, 01:35 PM
Threaded Mode