Engine Start??

[badfinger]

I just tried starting the engine with CEM, as I always do, using F6 I. Nothing happened, and now I can't figure out why. I went to options/controls/aircraft/keys but don't see where to re-assign keys for engine start.

If I'm just having a senior moment, here, be kind and help me out.

Thanks,

binky9

[JG53Frankyboy]

general rules:
switch on fuelcock for each engine
set throttle to 10%

sometimes you have to ignite a second time.

[badfinger]

Originally Posted by JG53Frankyboy

general rules:
switch on fuelcock for each engine
set throttle to 10%

sometimes you have to ignite a second time.

I'm doing that. The problem is the engine won't turn over. It should at least do that, even with the fuel off. The prop doesn't move.

binky9

[bw_wolverine]

Originally Posted by binky9

I'm doing that. The problem is the engine won't turn over. It should at least do that, even with the fuel off. The prop doesn't move.

binky9

Maybe a key binding issue? Check the controls options to make sure that your keys didn't somehow get screwed up via some bug.
The keys for aircraft engines are in the 'aircraft' section of the key bindings. You need to switch to that from the general keys that are the first ones that pop up by default. Then it's a lot of scrolling until you find the appropriate ones. Ignition I believe is the one you want for I and Toggle Fuel Cock for the fuel bit.

[badfinger]

Originally Posted by bw_wolverine

Maybe a key binding issue? Check the controls options to make sure that your keys didn't somehow get screwed up via some bug.
The keys for aircraft engines are in the 'aircraft' section of the key bindings. You need to switch to that from the general keys that are the first ones that pop up by default. Then it's a lot of scrolling until you find the appropriate ones. Ignition I believe is the one you want for I and Toggle Fuel Cock for the fuel bit.

I just had a idea that I can't test until I get home, tonight. If I am using the clickable cockpit, which I just switched to, do I need to use the "Start" button on the panel, rather than a key setting?

binky9

[aus3620]

No, the "ignition" button on the dashboard does not work. "I" is the default ignition. Try that. Have a look at this webpage, it may help you out.

[badfinger]

Originally Posted by aus3620

No, the "ignition" button on the dashboard does not work. "I" is the default ignition. Try that. Have a look at this webpage, it may help you out.

I know "I" is the right key, but do I assign it to one of an "engine select" or "engine toggle", or something else. Nothing seems to work. This is the strangest thing I have seen so far. One minute "F6 I" was working just fine, and always had, the next I can't start the engine.

What I can't remember is what" F6 I" was assigned to in the options.

binky9

[aus3620]

Hi Binky9,

Now I get it!! Like you I have just discovered that there is no Ignition to set from the menu selections! How odd is that!?

In my 1C SoftClub/il2 sturmovik cliffs of dover directory are all the various control files I have setup for each aircraft. For instance, myHurri. All these are text files so can be edited with Notepad.

I think they all are based on the confUser file.

Search for capital "I".
You should find the line - I=enginei01

If not, edit or insert as appropriate.

No expert on this sort of stuff but give it a go!

[badfinger]

That doesn't appear to have worked. Although, my computing skills are worse than normal.

I found 4 confuser.ini files, and put 'I=enginei01" in each, but no joy.

binky9

[aus3620]

hi binky7,

Four confUser files does not sound right! I'm only guessing so hopefully someone else here with more knowledge will chime in.

In the confUser file is a section: [Hotkey pilot]
quote

[HotKey pilot]
Joystick1+Key1=trigger1
Z=rudder_leftx
X=rudder_rightx
W=thtl_110
Joystick+Key15=airbrake
Control NumPad-9=site_alt_plus
V=landingflaps_d
Shift BackQuote=engselect_all
Control NumPad-8=site_dist_plus
T=thtl_psicutout
Control NumPad-7=site_spd_plus
Control NumPad-6=site_side_right
R=rad_auto
Control NumPad-5=site_auto
Control NumPad-4=site_side_left
Joystick2+Key0=trigger01
Control NumPad-3=site_alt_minus
Joystick+Key0=pitch_plus
Control NumPad-2=site_dist_minus
Control NumPad-1=site_spd_minus
I=enginei01
Joystick+Key14=trigger3
G=uc
Control Z=ruddert_left
F=landingflaps_u
Control X=ruddert_right
Control W=abwurf_arm
B=wheelbrakex
Control T=thtl_slowcutout
Equals=thtl_plus
9=extinguisher
6=rad_plus
5=rad_minus
Control G=uc_down_emer
Shift 8=engselect_n7
Joystick+Key12 Joystick+Key18=autorudder_off
Shift 7=engselect_n6
Shift 6=engselect_n5
Control C=pilot_switch
Shift 5=engselect_n4
Control B=bombbaydoors
Shift 4=engselect_n3
Shift 3=engselect_n2
Shift 2=engselect_n1
Shift 1=engselect_n0
Down=elevator_downx
Right=aileron_rightx
Up=elevator_upx
Left=aileron_leftx
Control 7=rudder_leftx
Joystick+Key12 Joystick+Key17=autorudder_low
Shift Down=elevatort_ndown
Shift Right=aileront_right
Space=trigger0
Shift Up=elevatort_nup
Shift Left=aileront_left
Joystick+Key12 Joystick+Key16=autorudder_high
Joystick1+Key3=trigger2
Joystick+Key3=pitch_auto
MouseLeft=MouseControl
Underscore=thtl_minus
Backspace=thtl_wep
Joystick+Key2=pitch_minus

unquote

Looks like some are default and some I've set (joystick commands).

Edit one of the confUser files and check what the [Hotkey Pilot] section looks like. Rename the others, suffix a number or whatever (confUserold1, ...), so you only have one confUser file.

All I can suggest at the moment, other than a re-install!

Good Luck!