Patch Beta 2 - v15866 BUG REPORTS

[ATAG_Dutch]

Originally Posted by Scavenger

anybody try to set visual effects on minimum.
no hanging issues for me after that.

Yeah right, so we play the game with no smoke, no explosions, and no gun flashes and we're supposed to be grateful?

This is a war sim mate, not FSX.

How can they possibly have not noticed this before even releasing the 'Beta' patch?

[Richie]

Not a bug report Luthier but if you want this sound to be as realistic as possible the wind must be much much louder especially in dives and open canopy flight. In dives the wind sound takes over the sound of the engine in 109s in volume probably Spitfires too. In flight open canopy wind should howl hardly any engine sound at all. Stick your head out of your car going 100 mph and see what it sounds like.

[LoBiSoMeM]

I try to test some things, but what i found is that we have MAJOR bug regards effects (explosions), with lock ups, and that the terrain visuals are much better, and external vision of aircrafts too.

This new beta is too much unstable to further testing. Try a hotfix for explosions related crashes, at least.

[RAF_Nudge]

Originally Posted by LoBiSoMeM

I try to test some things, but what i found is that we have MAJOR bug regards effects (explosions), with lock ups, and that the terrain visuals are much better, and external vision of aircrafts too.

This new beta is too much unstable to further testing. Try a hotfix for explosions related crashes, at least.

Ok I MUST ask the question to all you guys whining about this patch.

Did you guys notice and install the small 2.41Mb patch for partical effects and explosions? Update – October 6, 2011
Copied from Luthier's original post for patch...

"Please download and install a small update to the beta that fixes the most commonly encountered issue that has to do with explosions and particle effects hanging up the game.
http://www.1cfiles.com/IL2_CliffsofD...core_patch.rar"

FULL ORIGINAL POST
http://forum.1cpublishing.eu/showthread.php?t=26761


If not perhaps you all should take the time to read luthiers posts before complaining about graphical issues. THAT IS READ IT ALL BEFORE YOU START BLINDLY INSTALLING BETA PATCHES It also is quite apparent from the complaints that most have low end systems running mid to high graphics settings...take a reallity check guys and turn the settings down or upgrade the items deficient in your sytems. use a process of ellimination by starting at low and slowly turning things up....

Me personally am impressed with this new patch, I am not without the odd crash here and there, but i think visibillity of other Planes has improved ten fold.

THUMBS UP TO THE TEAM AT 1C FOR THE PROGRESS SO FAR...You can't please everone all the time...

MY SYSTEM
CPU Phenom II X4 965 @ 3.4 Ghz (Quad Core)
MB Gygabyte GA-78LMT-S2P
GPU Gigabyte 1gb GTX550 ti Nvidea Drive Ver 280.26
RAM G.Skill 8gb DDR3 1333mhz
OS Win 7 Home Premium 64Bit OEM
PSU A-Power M80 Plus 550W 80+ Certified
CASE Antec 300 gaming tower with twin 140mm fans 1x inlet 1x exhaust
MONITOR Acer 21.5" V223HQBD 5ms Monitor
HDD WD 3.5" 500gb Blue Sata 3 7200rpm
JOYSTICK Saitek Cyborg evo

My graphics settings are in the attached files (Screenshots) The global setting in Nvidia Settings has made a huge difference to my game...

[1PL_Lucas]

There is also one thing, which I did not do previously and had an impact on my game:
- Please open your conf.ini and make sure the anti epilepsy filter is turned off (set to 0). After turning it off, my performance became very similar to the one from the 1.02. Before doing that, I had about 15 fps less, even the AE Filter was unchecked in my settings.
So, all the Gents, who claim that the performance is much worse, please check the conf.ini!

As for the bugs, I would like to ask the Dev Team to rework the low res, non-detail ground textures which still have the old color palette. If someone like me is using the landscape detail set to low or medium, it can be easily spotted, because the color difference is huge and the higher you are, the worse it looks like.

Lucas

[GF_Mastiff]

nothing to do with ANTI ep filter not even in my config ini, and yes the small hot fix from the 6th is installed.

other than that cant wait to get me a 120hrz monitor when they come down in price to try out my NVIDIA 3D.

[bw_wolverine]

Flying on ATAG over French coastline tonight, large sections of land became black (no texture). Also, while chasing a plane across the channel, ships were hovering in midair upside down and listing (as if sunk).

Also, where the land was black, grass was in mid air, maybe 1000 ft up.


Yikes.

Core i7 940, GTX580 with up to date NON-beta drivers, 12gb ram, running CloD from 128gb SSD, SB X-Fi card, MSFFB2 stick, Track IR. Win 7 Pro 64bit

[Richie]

Originally Posted by Richie

Not a bug report Luthier but if you want this sound to be as realistic as possible the wind must be much much louder especially in dives and open canopy flight. In dives the wind sound takes over the sound of the engine in 109s in volume probably Spitfires too. In flight open canopy wind should howl hardly any engine sound at all. Stick your head out of your car going 100 mph and see what it sounds like.

After installing the hotfix and flying around a while I've changed my mind. I put my 109 in some dives and the wind was very.................. LOUD!! I loved it. Before I was going by a Spitfire video I saw in here. Sorry about that.

[GF_Mastiff]

I'm seeing way to much warping from the new E4 models I get on ones tail he warps magically 1000m away from me.
ATAG server beta.

my ping was 34 his was 64. or he was screen shooting like crazy?
which don't make since, theres no screen shot folder anymore.

[TomcatViP]

Not a new one but its presence get realy annoying :

Activating the boost cut-out in the Hurri makes the eng run cooler

It's easier to run flat out with the boost activated than without.

(btw I do not use this trick)

Don't know how it works in the Spit

~S!