Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover

IL-2 Sturmovik: Cliffs of Dover Latest instalment in the acclaimed IL-2 Sturmovik series from award-winning developer Maddox Games.

Reply
 
Thread Tools Display Modes
  #1  
Old 07-27-2011, 11:30 PM
retrojet retrojet is offline
Approved Member
 
Join Date: Mar 2010
Posts: 171
Default

I went from a logitech ff and no pedals, to this same saitek setup.
Not a lot of hrs yet, so still sharp.
But I do miss the ff... I know the 940 has a bad rap... But I would still consider it, as long as logitech offer a decent return policy...
Still, according to me missus, I'm lucky to get what I got :
Need to win the lottery to make she who must be obeyed happy!
Reply With Quote
  #2  
Old 07-28-2011, 12:21 AM
Tiger27 Tiger27 is offline
Approved Member
 
Join Date: Feb 2010
Posts: 319
Default

I bought my Fighterstick second hand 8 or 9 years ago, and it still works flawlessly, combined with some nice simped rudder pedals and a ch throttle quadrant you cant go wrong.
Reply With Quote
  #3  
Old 07-28-2011, 01:23 AM
ATAG_Dutch ATAG_Dutch is offline
Approved Member
 
Join Date: Feb 2010
Posts: 1,793
Default

Had some software issues with my G940, but it now works like a dream. (It only took me three months to work it out).

No longer considering selling, it's the veritable dog's taters.

I'd say go for the G940. It feels so good.
Reply With Quote
  #4  
Old 07-28-2011, 01:56 AM
FS~Phat FS~Phat is offline
Approved Member
 
Join Date: Dec 2010
Posts: 609
Default

I have both X52 and X52pro too and the pro pedals as well and they are all great.
The pro has better tension than the standard X52 and I dont have a problem with it.
I did the X52 pro magnet/hall sensor mod about 6 months ago which dramatically improved centre sensitivity. The software is great, the number of switches, hats and axis is awesome. I have had the pro since they released several years ago with not one problem! The pedals are great as long as you have something to hold them in place, as they are not that heavy and willl move on carpet or floorboards. They are durable though as long as you dont try push your self out from your desk as I have done a few times. This can cause the internal mech to become unaligned and jam and you then have to take it apart and realign it.
Not a huge problem as it has never actually broken but you just have to remember not to push against both pedals at once with too much force! I havent done this for a long time now (several years) and they are still working as good as new!

I have tried some of the cheaper logitech sticks and a G940 in a shop but didnt like the feel of the G940 and the cheap Logitech 3d extreme pro only lasted 2-3months before becoming a twitching quivering mess!

IMHO the only sticks worth considering are X52pro, almost any CH stick or the Warthog.
Reply With Quote
  #5  
Old 07-28-2011, 02:22 AM
FS~Phat FS~Phat is offline
Approved Member
 
Join Date: Dec 2010
Posts: 609
Default

Quote:
Originally Posted by cheesehawk View Post
Hey Phat,

Like I said in my earlier post, I've considered the mod for a long time, but as I really don't have that much sloppiness now (or, at least still the stock sloppiness) I haven't really felt the need to spend the time on doing the mod. Would you really recommend it?
Yes it makes the stick farrr more sensitive around the centre axis and also allows for proper concentric circles in joytest which means left right aileron movements wont influence elevator and visa versa!





Heres the result from someone elses joystick but mine was exactly the same.

Before


After

Last edited by FS~Phat; 07-28-2011 at 02:32 AM.
Reply With Quote
  #6  
Old 07-28-2011, 04:26 AM
jimbop jimbop is offline
Approved Member
 
Join Date: Jan 2011
Location: Australia
Posts: 1,064
Default

Yes, the magnet mod is almost compulsory for the x52 IMHO. I did mine with paper clips to support the magnets which was very easy to install.

Regarding the spring tension I went the other way and reduced it using some cable ties. Reducing the tension makes the centre much easier to handle accurately.
Reply With Quote
  #7  
Old 07-28-2011, 05:32 AM
jayrc's Avatar
jayrc jayrc is offline
Approved Member
 
Join Date: Aug 2010
Posts: 339
Default

my x52 just died, lights kept flashing on and off, had it less than a year, throttle still working, took the stick apart and found broken wire and fried circuit board, will be going with ch fighterstick.
Reply With Quote
  #8  
Old 07-29-2011, 03:32 PM
klem's Avatar
klem klem is offline
Approved Member
 
Join Date: Nov 2007
Posts: 1,653
Default

Quote:
Originally Posted by cheesehawk View Post
Hey Phat,

Like I said in my earlier post, I've considered the mod for a long time, but as I really don't have that much sloppiness now (or, at least still the stock sloppiness) I haven't really felt the need to spend the time on doing the mod. Would you really recommend it?
Definitely, its quick and easy but only applies to the stick with its hall sensors. Eliminates any 'centrepoint' dead zone, it flows right through. Whether or not there is a 'deadzone' and having a sloppy stick due to spring weakness are two different things. My stick was very heavy when I got it but its nice and easy now.

My only beef is I can't find replacement switches nor the pots for the Throttle which, like any stick, wear out after some time. I've had my X52Pro for about 6 years and the rudders for about 4. One stick switch went 'sticky' about a year ago but has cleared up now. The X Rotary on the throttle has a worn centrepoint, too much elevator trimming

I would consider buying top CH stuff but I can't afford it.
__________________
klem
56 Squadron RAF "Firebirds"
http://firebirds.2ndtaf.org.uk/



ASUS Sabertooth X58 /i7 950 @ 4GHz / 6Gb DDR3 1600 CAS8 / EVGA GTX570 GPU 1.28Gb superclocked / Crucial 128Gb SSD SATA III 6Gb/s, 355Mb-215Mb Read-Write / 850W PSU
Windows 7 64 bit Home Premium / Samsung 22" 226BW @ 1680 x 1050 / TrackIR4 with TrackIR5 software / Saitek X52 Pro & Rudders
Reply With Quote
  #9  
Old 07-28-2011, 07:34 AM
SYN_Repent SYN_Repent is offline
Approved Member
 
Join Date: Jun 2011
Posts: 97
Default

ch fighter stick is the best stick i have ever owned, get a second hand x52 and use the throttle, with some pedals you then have a good setup.
Reply With Quote
  #10  
Old 07-28-2011, 11:19 AM
Ze-Jamz Ze-Jamz is offline
Approved Member
 
Join Date: Jan 2011
Location: On your six!!
Posts: 2,302
Default

Well ive made my choice...G940

Ive read bad reviews on all the sticks.even the Warthog with its intermittent throttle problem...i guess its like anything, for 1 bad review there are 50 people that love the product..

I hope i dont regret it, only time will tell

What helped make my mind up is the FFB, never had it before and if its as good as they say it is im looking forward to trying it..

I paid £199 delivered so it was £50 more than the Saitek setup...

Ive had the X52 didnt like it
Ive got the CyborgX 6 months and its all over the place

Always had Logitech stuff and still have the Speakers..good quality for the ££

Il certainly keep you updated..

Anyone got any ideas on how I hide this setup from the GF?
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 07:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.