Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik

IL-2 Sturmovik The famous combat flight simulator.

Reply
 
Thread Tools Display Modes
  #1  
Old 05-01-2011, 04:20 PM
Paulski Paulski is offline
Registered Member
 
Join Date: Apr 2011
Posts: 10
Default Beginner question

So now that I got the game to work it's time to start out. However, I don't have much experience with flight sims and I'm still having trouble with some things.

One of these things is that, although I turned off options like torque and wind, they still seem to be there when I play... now it isn't that much of a problem for me, but it's difficult to keep my plane straight, when flying to my objective. Any tips on how to cope with this? (I know I could use autopilot, but using autopilot all the time makes the game boring IMO)
Reply With Quote
  #2  
Old 05-01-2011, 04:25 PM
IceFire IceFire is offline
Approved Member
 
Join Date: Apr 2008
Posts: 1,879
Default

Rudder trim is the key to combating engine torque. Use rudder (and elevator) trim until the bar or slip indicator are centered.

Note that a few aircraft series like the FW190 and Bf109 do not have rudder trim. Those planes should fly straight at their cruising speeds... around 300kph or 330kph.
__________________
Find my missions and much more at Mission4Today.com
Reply With Quote
  #3  
Old 05-01-2011, 10:29 PM
Romanator21 Romanator21 is offline
Approved Member
 
Join Date: Sep 2009
Posts: 507
Default

Do you have a joystick? If you're using arrow keys, you will definitely have a hard time flying straight and level for very long. If you do have a stick, make sure to just make small corrections. Change the input curves if you have to.
Reply With Quote
  #4  
Old 05-02-2011, 08:56 AM
Paulski Paulski is offline
Registered Member
 
Join Date: Apr 2011
Posts: 10
Default

Quote:
Originally Posted by IceFire View Post
Rudder trim is the key to combating engine torque. Use rudder (and elevator) trim until the bar or slip indicator are centered.

Note that a few aircraft series like the FW190 and Bf109 do not have rudder trim. Those planes should fly straight at their cruising speeds... around 300kph or 330kph.
I've been practicing a little bit with the trims, and using elevator trim is going quite good now. Rudder trim needs some more practicing, because I constantly "over-trim", and then have to trim the other way etc.

But what is causing the plane not to fly straight? Is it the torque and gyro effects? Or is it the wind?

Quote:
Originally Posted by Romanator21 View Post
Do you have a joystick? If you're using arrow keys, you will definitely have a hard time flying straight and level for very long. If you do have a stick, make sure to just make small corrections. Change the input curves if you have to.
Yes, I bought a joystick especially for this game. I already have the game for over a year or so, but couldn't really play well with keyboard (nor with my joypad, for that matter).
Reply With Quote
  #5  
Old 05-02-2011, 11:18 AM
Romanator21 Romanator21 is offline
Approved Member
 
Join Date: Sep 2009
Posts: 507
Default

Quote:
But what is causing the plane not to fly straight? Is it the torque and gyro effects? Or is it the wind?
It's hard for us to know exactly what you mean by this, that's why I was asking my question earlier...

Could you maybe post a track or video of what's going on? If you turned off torque, I don't see why it should be a factor.
Reply With Quote
  #6  
Old 05-02-2011, 02:24 PM
Paulski Paulski is offline
Registered Member
 
Join Date: Apr 2011
Posts: 10
Default

I've recorded a short flight:

http://www.4shared.com/file/NX7T1i8e/test.html

This time at the take-off I didn't have to countersteer much, but when I was in the air and I relessed my stick at around 1:40 my the plane started to steer right.

By the way, I have torque and wind off, when turned on it's much more severe. So it seems turning those options off doesn't really turn it off, it's just reduces the effects (wich is all ok to me, I just want to learn how to counter this )
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 01:26 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.