Describe issues with BOB COD that need patch - for Oleg, Luthier

[Flanker35M]

S!

Some people exprience the Launcher.exe to stop working = crashing. Have this too, especially if changing Video options. If they are changed, the changes are not saved. Have to restart and apply again to take effect.

Another issue is the mentioned 2 CoD running in task bar. Other being the game, other just a black screen.

[lothar29]

Originally Posted by Skiiwa

Same Graphics glitch for me.
Really would like a fix as its unplayable for me. It is the Russian Version off Yuplay. I have No regrets with buying it though! Even with the glitches this Game has MAJOR Potential!
This Looks to be a Shader Problem. Gonna Fool around with My Config files for a bit.

Chris

Mainboard : Abit FP-IN9 SLI(C55-MCP51)
Chipset : nVidia nForce 650i SLI SPP
Processor : Intel Core 2 Duo E6420 @ 2133 MHz
Physical Memory : 4096 MB (2 x 2048 DDR2-SDRAM )
Video Card : NVIDIA GeForce GTX 460 SE
Hard Disk : WDC (1500 GB)
Hard Disk : WDC (500 GB)
DVD-Rom Drive : HL-DT-ST BDDVDRW GGC-H20L SCSI CdRom Device
DVD-Rom Drive : TSSTcorp CDDVDW SH-S203N SCSI CdRom Device
Monitor Type : LG Electronics W2353 - 23 inches
Monitor Type : LCM-22w3 - 22 inches
Operating System :
Microsoft Windows XP Professional 5.01.2600 Service Pack 3
DirectX : Version 9.0c (May 2010)

################################################## ################################################## ####

Attempts to edit the conf.ini and put the following into each site, this afternoon I past to my by putting to work with DX9.


before making any change creates a backup file copy the original conf.ini and save it, if something fails can return to leave it as it was...


Here the lines to change, I am sure it will be your solution...


[BOB]
difficulty=8058095
AntiEpilepcy=0


[window]
DepthBits =24
StencilBits=8
DrawIfNotFocused=0
SaveAspect=0
Render=D3D10_0 <<<<<<<<<<<you are your problem This game has problems working with D3D9 will DirectX9
width=1600
height=900
ColourBits=32
FullScreen=1
ChangeScreenRes=1


To see if it works, I think that should work...

[Rote Dreizehn]

The Cockpits of the planes should be complete clickable.

For example (BF109 start from Airfield):

Haven´t found the ignition button to start the Engine
(have to press I on Keyboard)

Other buttons are not clickable (have to press Keyboard)

Will be very pleased to have the possibility at a later Patch.

Thanks.

[Skiiwa]

Originally Posted by lothar29

################################################## ################################################## ####

Attempts to edit the conf.ini and put the following into each site, this afternoon I past to my by putting to work with DX9.


before making any change creates a backup file copy the original conf.ini and save it, if something fails can return to leave it as it was...


Here the lines to change, I am sure it will be your solution...


[BOB]
difficulty=8058095
AntiEpilepcy=0


[window]
DepthBits =24
StencilBits=8
DrawIfNotFocused=0
SaveAspect=0
Render=D3D10_0 <<<<<<<<<<<you are your problem This game has problems working with D3D9 will DirectX9
width=1600
height=900
ColourBits=32
FullScreen=1
ChangeScreenRes=1


To see if it works, I think that should work...

################################################## ##

Thanks Lothar29<<<
Unfortunatley I am running WinXP SP3 and I cant use DX10 I did try it. I spent all day, messing up my install 3 times, and nothing I changed in the INI files helped with the shimmering textures. The Cockpit Looks AMAZING even with my graphics all messed upP I even set up different configs for my Nvidia card to force COD to run and nothing changed it.

If anyone Comes up with a Solution PLEASE let me know!

Chris

[giap69pavel]

Originally Posted by lothar29

I did detect one which may be that you already know, when you land with the tger moth on the Mission of instruction of the first flight, when you land if you look at the floor of the aircraft plants are crossing the cockpit...If you need more information, it volare mission and are screenshot


I also have a problem when using Windows chat, when the assets already can not take them in any way, is left in a box blank and I have to get out of the Simulator to edit the file conUser.ini to remove the last lines that are located in [ChatWindow] because I have to remove all this so that the white tables no longer exist...


Photos





Forgive my bad English

Is happening the same.

but unfortunally i can't take those white boxes.

The problem is that each tiem is getting worse.

Any fast and manual fix.

S!

[335th_GRAthos]

Originally Posted by giap69pavel

Is happening the same.

but unfortunally i can't take those white boxes.

The problem is that each tiem is getting worse.

Any fast and manual fix.

S!

Guys, I took these white boxes out by going there with the mouse, right clicking and selecting the LAST OPTION that appears (sorry for my very poor Russian )

It is multiple windows so you will have to repeat the process many times until no more windows ar left open.

I hope it helps, for me it did.

[Biggs]

Spit mkIa prop is bugged... WEP boost levels too

http://forum.1cpublishing.eu/showthread.php?t=19754

[giap69pavel]

Originally Posted by 335th_GRAthos

Guys, I took these white boxes out by going there with the mouse, right clicking and selecting the LAST OPTION that appears (sorry for my very poor Russian )

It is multiple windows so you will have to repeat the process many times until no more windows ar left open.

I hope it helps, for me it did.

Thank you very much.

So is not a BUG, it is a new feature no correctly explained.

S!

[Capt Backasswards]

system specs:
Gigabyte motherboard GA-870A-UD3
6 GB Crucial DDR3
AMD Phenom X4 965
700 watt Corsair power supply
Nvidia GeForce 470 GTX driver version 266.58
Win XP SP3
all drivers up to date

After patch every mission goes to 95% and system freezes up. Russian version.

Bummed....

Rick

[335th_GRAthos]

system specs:
3 GB DDR3
i7 2,93GHz
2 x Nvidia GeForce GTX 570 driver version 263.09
Win XP SP3

After patch every mission goes to 95% and system freezes up. Russian version.

--------------> SOLVED <-------------- T H A N K S
13. Q: I am running Windows XP. All missions stop loading at 95% and never complete.

A: Your memory is too low to fully load landscape with grass. Please go to Options - Video - Show Advanced
and uncheck Grass. This will allow the game to fully load. (automatic fix is on the way)
Technical Forum: http://forum.1cpublishing.eu/showthread.php?t=19819


PS. better my computer memory full of grass than my head....