4.10 Support & Bug Reporting - Page 21

Aviar · #**201** 12-28-2010, 05:22 AM

Quote:

Originally Posted by waffen-79

G Limit - Difficulty setting

support question

I already tested the feature and it looks and works awesome, But the question is

Can a server admin set the G Force Limit value as in dinamic variable?

The G-force Limit is built into the code. The user cannot alter any values. You can however turn the feature on/off in the Difficulty settings (G-force Limits).

Aviar

csThor · #**202** 12-28-2010, 06:58 AM

Quote:

Originally Posted by SkyFan

Dear DT members, please put your attention to my next investigation concerning board cobe of second aircraft from second link of second squadron. It has second "5" instead "6" (please see attached image). I don't know, why so

In other links & squadrons everithing is OK.
I hope, correction is possible

Best regards.

Will be fixed. Sorry, my fault.

pop · #**203** 12-28-2010, 07:18 AM

What about CRT?
Server - Windows Server 2008 R2 standart RU, 4.10_DS over clean 4.09 DS with CRT=2,
Client - Windows 7 Ultimate, 4.10_ru over clean 4.09

CRT=2 - Timeout1
CRT=1 - Timeout1

csThor · #**204** 12-28-2010, 07:35 AM

Unfortunately the CRT thingy is known to have issues with different OS versions between server & client. It's been this way ever since it was introduced.

pop · #**205** 12-28-2010, 07:46 AM

Quote:

Originally Posted by csThor

Unfortunately the CRT thingy is known to have issues with different OS versions between server & client. It's been this way ever since it was introduced.

It's was not!
We have normally use CRT = 2 at 4.09.
Were very rare problems with clients on Windows 2000 and CRT = 2.
CRT = 1 was never caused any problems.
Now, 80% of users can not join even with a CRT = 1

baronWastelan · #**206** 12-28-2010, 08:03 AM

Oil pressure guage is a useless ornament in the Hurricanes.

Aximand · #**207** 12-28-2010, 08:58 AM

Hello TD, was trying to find report about that but i don't, there is mk108 gunpods on bf109g6-g6late, they not firing
...
Thanks.

EJGr.Ost_Caspar · #**208** 12-28-2010, 10:06 AM

That was in the fifth posting in this thread and it is confirmed to be a bug.

Genosse · #**209** 12-28-2010, 10:22 AM

Quote:

Originally Posted by Faust

Genosse,

I believe that when 4.10 is installed the default for time stamps in the display filter is off. Turn it on and you should see the time stamps. (At least that was the case for me.)

Daidalos Team,
As previously mentioned, the nationalities are saved in the .mis file. However, they are not read back in when re-loading the mission in FMB. The nationalities are read back in when playing the mission. It would be great if this could be fixed in 4.11 (or sooner

). This is not a mod-related issue. Pure 4.10m nothing else. Could someone from TD please confirm?

Thanks much guys for the great new additions.

Oops! Stupid me ... thank you for pointing me to that, Faust.

Reading, understanding and comprehending is the key to success!

Kwiatek · #**210** 12-28-2010, 10:58 AM

I report that with 4.10 pilot start to blackout too fast. It is not bug but just wrong issue.
Before 4.10 it was far realistic when pilot start to blackout ( tunnel vision) not until before constant 5.5 G. In 4.10 it was changed and now pilot get tunnel vision when pass constant 5 G which is too fast.

IRL normal pilot should start to greyout at about constant 5.5-6G then tunnel vision about 5.8 -6 G.

I fly aerobatic gliders and i have not any symptoms of blackout or greyout at constans 5.0-5.5 G - not any problem with it beside feeling of heaviness your body.

I think that blackout should be back to the same like before 4.10 where it was more realistic. Now pilots start to blackout too fast and at slowier speeds.