Can anyone help me to run Il2??

[KG26_Alpha]

Hi

I recommend for your video card ATI 9600

Install ATI video driver cat 7.11

Set IL2 resolution to the same as your desktop.

Change

[window]
width=1600
height=1200
ColourBits=16 << set to =32
DepthBits=24
StencilBits=8
ChangeScreenRes=1
FullScreen=1
DrawIfNotFocused=0
EnableResize=0
EnableClose=1
SaveAspect=1
Use3Renders=0

[Render_OpenGL]
TexQual=3
TexMipFilter=1<< set to=3
TexCompress=0<< set to=1
TexFlags.UseDither=1
TexFlags.UseAlpha=0
TexFlags.UseIndex=0
TexFlags.PolygonStipple=0<< set to=1
TexFlags.UseClampedSprites=0
TexFlags.DrawLandByTriangles=0[/B]<< set to=1
TexFlags.UseVertexArrays=1
TexFlags.DisableAPIExtensions=1<< set to=0
TexFlags.ARBMultitextureExt=0<< set to=1
TexFlags.TexEnvCombineExt=0
TexFlags.SecondaryColorExt=0<< set to=1
TexFlags.VertexArrayExt=0
TexFlags.ClipHintExt=0
TexFlags.UsePaletteExt=0
TexFlags.TexAnisotropicExt=0
TexFlags.TexCompressARBExt=0

TexFlags.TexEnvCombine4NV=0
TexFlags.TexEnvCombineDot3=0
TexFlags.DepthClampNV=0
TexFlags.SeparateSpecular=0
TexFlags.TextureShaderNV=0

HardwareShaders=1

Shadows=2
Specular=2
SpecularLight=2
DiffuseLight=2
DynamicalLights=1
MeshDetail=2
VisibilityDistance=3

Sky=2
Forest=2
LandShading=3
LandDetails=2

LandGeom=2
TexLarge=1
TexLandQual=3
TexLandLarge=1

VideoSetupId=0 <<< set to =10
Water=2
Effects=1
ForceShaders1x=0

PolygonOffsetFactor=-0.0625
PolygonOffsetUnits=-1.0

Listed here are the resolution tables for your card.

Mode Tables
2D DISPLAY MODES
Resolutions, colors and maximum refresh rates (Hz) in 256, 65K or 16.7M colors
Monitor Resolution Hz

640x480 120
800x600 120
1024x768 120
1152x864 120
1280x1024 120
1600x1200 85
1920x1080* 16:9 75
1920x1200 75
1920x1440 75
2048x1536 60

*16:9 aspect ratio monitors are supported on 1920x1080 and 848x480 on Windows® XP, Windows® 2000 and Windows® ME. The complete list of resolutions depends on the driver version and operating system. NOTE: resolutions are limited by the performance of the attached monitor.

MAXIMUM 3D RESOLUTIONS
(with 128MB Frame Buffer)
65K colors 2048x1536
16.7M colors 2048x1536

[Mart]

Thanks. i will try these new settings later.

I use Omega drivers at the moment so i will look for the cat drivers. What i can't understand is why is does not work on my machine anymore, it always used to with my current setup.

[Mart]

Also is my resolution ok to be set at 1600x1200??

[GF_Mastiff]

your not running the ATI with Advanced AI on are ya.. check to see.. that might be it.

[Mart]

Not sure. Worth checking though.

can't find the catalyst 7.11 drivers so will try the ATI Catalyst™ Display Driver 9.8 suite

[KG26_Alpha]

Originally Posted by Mart

Also is my resolution ok to be set at 1600x1200??

Yes

In the reply to your post I highlighted the resolution in red you are running at make sure its set to 85 hz refresh rate.



No don't install 9.8 it has problems with IL2 on your older card, thats why I mentioned 7.11 and not the latest Cat's.



7.11 download >> http://downloads.guru3d.com/ATI-Cata...load-1786.html

[Mart]

Excellent, thanks again. Will download and try that driver later.