How to activate WEP for Bf110

Bloblast · #1 05-24-2011, 09:52 PM

Anyone knows?
Only if I switch to autopilot and back I can get the WEP with pushing the throttle forward.

W32Blaster · #2 06-16-2011, 10:56 AM

Same Problem here:
no way to set manifold pressure higher than 30'

Description on instrument (red outlined markers on surface of gauge) means
D = Dauerbetrieb means permanent allowed pressure (1.25 Ata)
30' = Steigleistung 30 minutes max pressure (1.3 Ata)
1-2 = Start und Kampfleistung one to two minutes (1.4 plus Ata)

JG53Frankyboy · #3 06-16-2011, 11:31 AM

just an idea, lets wait the next patch (should be very close) - then we will see again.

Redroach · #4 06-16-2011, 01:25 PM

actually, now, that you say it... I've missed WEP in the 110 as welll - one more thinng to worry about

I hope the patch brings remedy here, too.

Blackdog_kt · #5 06-17-2011, 01:04 AM

Does it work if you press backspace?

Bewolf · #6 06-20-2011, 07:37 AM

I once got WEP running in the 110 by pressing "W". I am a bit confused here as you sometimes have to use W, sometimes Backspace to get extra boost up and running. Depends on the plane. Pretty bothersome, really.

JG53Frankyboy · #7 06-20-2011, 09:36 AM

i have two "systems" of activating WEP in my controls mapped so far:
for 109, 87 and 88 i just hit a button and WEP is running. In the 109 automaticly it will be reset after 1 minute, in the 87 and 88 i have to deactivate it by hitting the same button.

In the Hurri,Spit and Blenheim i have first to hit the button "boost cut out" than i am abble to push my X52 Throttle 'throug the gate' to get 110% in the digital Info window. When i dont have activated the cut out, pushing the throttle to the gate will not increase the 100% to 110% , it stays at 100%

So......what exactly you use in the BF110 to get the WEP..i am more than confused !

ATAG_Snapper · #8 06-20-2011, 12:51 PM

Thanks for the tip on activating WEP for Spits & Hurries. Until now I just figured it was non-functioning. Now to try it out and perhaps blow up a few Merlin engines in the process! LOL

Bloblast · #9 06-24-2011, 09:42 PM

the throttle to the gate will not increase the 100% to 110% , it stays at 100%

So......what exactly you use in the BF110 to get the WEP..i am more than confused ![/QUOTE]

It's only working for the 110 when you first switch to AI wait till it uses the WEP, switch back and then you can use it yourself with the throttle.