Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   FM/DM threads (http://forum.fulqrumpublishing.com/forumdisplay.php?f=196)
-   -   How to activate WEP for Bf110 (http://forum.fulqrumpublishing.com/showthread.php?t=23266)

Bloblast 05-24-2011 09:52 PM

How to activate WEP for Bf110
 
Anyone knows?
Only if I switch to autopilot and back I can get the WEP with pushing the throttle forward.

W32Blaster 06-16-2011 10:56 AM

Same Problem here:
no way to set manifold pressure higher than 30'

Description on instrument (red outlined markers on surface of gauge) means
D = Dauerbetrieb means permanent allowed pressure (1.25 Ata)
30' = Steigleistung 30 minutes max pressure (1.3 Ata)
1-2 = Start und Kampfleistung one to two minutes (1.4 plus Ata)

JG53Frankyboy 06-16-2011 11:31 AM

just an idea, lets wait the next patch (should be very close) - then we will see again.

Redroach 06-16-2011 01:25 PM

actually, now, that you say it... I've missed WEP in the 110 as welll - one more thinng to worry about :(
I hope the patch brings remedy here, too.

Blackdog_kt 06-17-2011 01:04 AM

Does it work if you press backspace?

Bewolf 06-20-2011 07:37 AM

I once got WEP running in the 110 by pressing "W". I am a bit confused here as you sometimes have to use W, sometimes Backspace to get extra boost up and running. Depends on the plane. Pretty bothersome, really.

JG53Frankyboy 06-20-2011 09:36 AM

i have two "systems" of activating WEP in my controls mapped so far:
for 109, 87 and 88 i just hit a button and WEP is running. In the 109 automaticly it will be reset after 1 minute, in the 87 and 88 i have to deactivate it by hitting the same button.

In the Hurri,Spit and Blenheim i have first to hit the button "boost cut out" than i am abble to push my X52 Throttle 'throug the gate' to get 110% in the digital Info window. When i dont have activated the cut out, pushing the throttle to the gate will not increase the 100% to 110% , it stays at 100%

So......what exactly you use in the BF110 to get the WEP..i am more than confused !

ATAG_Snapper 06-20-2011 12:51 PM

Thanks for the tip on activating WEP for Spits & Hurries. Until now I just figured it was non-functioning. Now to try it out and perhaps blow up a few Merlin engines in the process! LOL

Bloblast 06-24-2011 09:42 PM

the throttle to the gate will not increase the 100% to 110% , it stays at 100%

So......what exactly you use in the BF110 to get the WEP..i am more than confused ![/QUOTE]


It's only working for the 110 when you first switch to AI wait till it uses the WEP, switch back and then you can use it yourself with the throttle.


All times are GMT. The time now is 07:55 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.