Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   Performance threads (http://forum.fulqrumpublishing.com/forumdisplay.php?f=195)
-   -   gtx 560 ti (http://forum.fulqrumpublishing.com/showthread.php?t=23975)

jayrc 06-22-2011 08:28 AM

gtx 560 ti
 
1 Attachment(s)
what are the ideal video settings I should be using with my gpu(gtx560 ti SC 1 gb), I've seen some people with the same card as me running everything maximum settings, would love to see a screen shot of your video settings, please:grin:

here's mine

Baron 06-22-2011 08:54 AM

I think u would benefit from raising your res to at least 1680x1050 instead. I use that and everything on medium with grass, roads etc. checked simply to get high fps without cutting back on graphics to much.

Got the same gpu and cpu as u.

Tiger27 06-22-2011 09:23 AM

Im running everything high except land texture and land shading and forest medium, roads, shadows and grass on vsync on in control panel not ticked in game and AA 4x but I do run at 1680x1050 which is native to my old 22in runs very smooth over sea and most land, very minor stutters over London down low, if looking over the wing, av. about 20fps down low over London and 40+ in most other situations.

Also my card is the stock Asus card so it only has a slight OC, I havent OCed further yet but will probably bump it up a bit in the future if needed.

LoBiSoMeM 06-22-2011 10:44 AM

Quote:

Originally Posted by Tiger27 (Post 300496)
Im running everything high except land texture

Why you don't maximize texture? I tested a lot and have same performance with texture Original or High... What I put OFF now is forest... If I can't crash hitting trees I don't want that they block my vision in MP. No big hit in performance, but it's just eyecandy with some minor hit in FPS but big in MP gameplay.

jayrc 06-22-2011 02:03 PM

how did you get clod into your nvidia control panel, thanks

Tiger27 06-23-2011 02:07 AM

Quote:

Originally Posted by LoBiSoMeM (Post 300525)
Why you don't maximize texture? I tested a lot and have same performance with texture Original or High... What I put OFF now is forest... If I can't crash hitting trees I don't want that they block my vision in MP. No big hit in performance, but it's just eyecandy with some minor hit in FPS but big in MP gameplay.

Yes I run original, I think I meant land detail and land shading.

I actually find it smoother with building amount set to unlimited

Tiger27 06-23-2011 02:08 AM

Quote:

Originally Posted by jayrc (Post 300604)
how did you get clod into your nvidia control panel, thanks

I dont, I just use the global settings, with vsync forced on, then its turned off in CoD, it works fine this way.

335th_GRAthos 06-23-2011 11:41 AM

Quote:

Originally Posted by Tiger27 (Post 300883)
Yes I run original,
I actually find it smoother with building amount set to unlimited



Thanks for the tips gents, I will try these two things as well.

From my side, removing the tick on SHADOWS, you have a big improvement in fps.

~S~

jayrc 06-23-2011 02:28 PM

1+ thanks

IbnSolmyr 06-30-2011 06:01 PM

I'm receiving my 560 Ti in a few days, it will complete my new PC rig. I'll comme back to this thread..

But by the way, it depends a lot of the 560 you have :

- Stock Nvidia GTX 560 Ti : GPU @ 822 Mhz, Shaders @ 1644 Mhz, RAM @ 4002 Mhz
- Gigabyte GTX 560 Ti OC : GPU @ 900 Mhz, Shaders @ 1800 Mhz, RAM @ 4002 Mhz. (> easily 8 % better than the stock one)
- Mine : Gigabyte GTX 560 Ti SOC (new series) : GPU @ 950 Mhz, Shaders @ 1900 Mhz, RAM @ 4580 Mhz. (> easily 15 % better than the stock one)
- The most powerful 560 ever built : Gigabyte GTX 560 Ti SOC (not produced anymore as it, reproduced in lower series, the one i'm getting) GPU @ 1000 Mhz, Shaders @ 2000 Mhz, RAM @ 4580 Mhz. (> easily 20 % better than the stock one)

Gigabyte is the constructor which pushed the card at its limits. They got a too important back rate, so changed in a bit lower one. Others did some 560 OCs.
For your information, it seems that the card is easily OCable in terms of RAM frequencies... Some pushed it at average 4800 Mhz without fidgeting the tensions.


All times are GMT. The time now is 07:35 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.