Official Fulqrum Publishing forum

Official Fulqrum Publishing forum (http://forum.fulqrumpublishing.com/index.php)
-   IL-2 Sturmovik (http://forum.fulqrumpublishing.com/forumdisplay.php?f=98)
-   -   New core DLL`s feedback (http://forum.fulqrumpublishing.com/showthread.php?t=2472)

adam906 01-02-2008 05:46 AM

Every time I load up with the new patch, I get to 95% loaded and then everything crashes. I've tried using the DLLs from 4.07 and .08 and nothing.

If there is a solution posted to this problem somewhere, I've missed it.

Any help would be appreciated. I'm computer illiterate but what I have is a:

P 2Ghz
1Gb Ram
Radean X300 video card with 128DDR memory

LukeFF 01-02-2008 05:47 AM

Quote:

Originally Posted by crazyivan1970 (Post 32843)
Apparently there is no problems with core DLL`s...Except some texture flickering along the coast lines for some 8800 series owners, yes?

Correct. I get the flickering textures on the water with both the reflections along the coastline and from the reflections of the ships. I'm using the 8800 GTS in SLI mode with the latest nVidia drivers.

adam906 01-03-2008 09:55 PM

Quote:

Originally Posted by adam906 (Post 33158)
Every time I load up with the new patch, I get to 95% loaded and then everything crashes. I've tried using the DLLs from 4.07 and .08 and nothing.

If there is a solution posted to this problem somewhere, I've missed it.

Any help would be appreciated. I'm computer illiterate but what I have is a:

P 2Ghz
1Gb Ram
Radean X300 video card with 128DDR memory

I take it this is in the too hard basket....?

Urufu_Shinjiro 01-03-2008 10:26 PM

Quote:

Originally Posted by adam906 (Post 33375)
I take it this is in the too hard basket....?

Well before you get your panties in a wad, what dll's are you trying? Be specific if you want timely help.

crazyivan1970 01-04-2008 04:38 PM

Anyone with ATI card and 7.12 drivers run into the problem with the water=1, =2? Texture corruption and flickering? Seem to be an issue with ATI1800/1900 series. At least for me. Tested on 1800XTX and 1900XTX, same result.. water surface on the distance looks like a bunch of stripes.. one normally textured, one kinda shiny... Went back to previous set of drivers 7.8 and issue went away....

=RedChip= 01-04-2008 05:03 PM

Yes, I had the same issues with a x1950GT AGP: striped textures and bad performance. In my case the 7.11s are the best option.

Just a question: Do you have a small texture corruption on the cockpit frame in Fw 190 cockpit, when you look to the right side in the lower right corner of the screen? Even with the 7.7 Catalyst I have this issue, no matter if it is in perfect mode or not, although it doesnt happen with DirectX, only in OpenGL.

crazyivan1970 01-04-2008 05:07 PM

Thanks for feedback Chip. Guess it`s not just me :)

I`ll check 190 tonight when i get home.

adam906 01-04-2008 08:21 PM

Urufu,

I tried the DLL replacement download to no avail. Then I tried the Dlls from 4.07 again with no answer and the same result for the 4.08 Dlls

I had assumed seeing as the Dll downloads included 4 - 5 that I was to replace all of them, so that s what I did with the 4.08 and 4.07 change overs

Urufu_Shinjiro 01-04-2008 09:41 PM

Quote:

Originally Posted by adam906 (Post 33469)
Urufu,

I tried the DLL replacement download to no avail. Then I tried the Dlls from 4.07 again with no answer and the same result for the 4.08 Dlls

I had assumed seeing as the Dll downloads included 4 - 5 that I was to replace all of them, so that s what I did with the 4.08 and 4.07 change overs

Hmm, it seems that mg_snd_sse.dll is the one thats giving the issues. Was it CSThors's dll's that you used? Perhaps it only seems related, do you have any mods installed? Maybe try re doesnloading and reinstalling the patch, bad download?

Falke 01-04-2008 09:47 PM

Are these new .dll's different then those that came with the 4.09 Beta? If so, where can I get them? I've looked but haven't found a link.

The sim won't start with those in the 4.09 Beta. I know about using the .dlls from 4.08, but I thought if there were newer dll's I'd try those. Besides, if I start changing out .dll's, won't I be losing some of the 4.09 beta goodies?

Thanks

My system:

O.S.: Windows XP Professional SP 2
Processor: AMD Athlon(tm) XP 2600+
Memory: 1024MB RAM
Hard Drive: 2x Western Digital 35 gig 10,000 rpm.
Video Card: NVIDIA GeForce 6800 Ultra
Monitor: LG StudioWorks 995E(CB995CE)
Sound Card: Turtle Beach Santa Cruz


All times are GMT. The time now is 05:10 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.