AMD Bulldozer

[Codex]

I haven't been keeping up with the trends for a while now, but today I was curious about bulldozer. Went to one of my favourite reviewer sites and found this ...

http://www.hardocp.com/article/2011/09/13/amd_bulldozer_fx_model_8150_cpu_overclocking_previ ew

4 GHz on air ... I want a Bulldozer CPU now :P

[JG52Krupi]

Lol with the i7 2600k and even the i5 2500k there are reports of 5GHz on air.

[JG52Uther]

I could go out today and buy a pre overclocked I5 running @ 4.5 GHz (If I had any money! ;) )

[klem]

I haven't been keeping up with the trends for a while now, but today I was curious about bulldozer. Went to one of my favourite reviewer sites and found this ...

http://www.hardocp.com/article/2011/09/13/amd_bulldozer_fx_model_8150_cpu_overclocking_previ ew

4 GHz on air ... I want a Bulldozer CPU now :P

Getting 4GHz on my i7 950 and could push to 4.2 if I wanted to risk higher temp in FSX (using Megahalems air cooler). CoD doesn't push it any where near as hard.

Mine's a scan.co.uk 3XS system (I couldn't be bothered to o/c myself this time)

But you're right in principle :)

[Welshman]

i have a amd 1090T that i have had running 4.4ghz on air before now but that was just for some benchmarking , can run 4.0 ghz 24/7 but actually atm its running stock which is about 3.6 in turbo mode , for around £134 thats not a bad cpu .

need a better gfx card though as my 2 x ati 4890's seem to be struggling .

[Ze-Jamz]

I have the 1055t AMD 2.8ghz running at 3.6ghz on not just Air but the crap cpu fan too that they supply in a bundle from Novatech lol and it cost £100!

One thing about AMD's they are very stable and the black editions are very overclockable..

Ive been toying with the idea to get the AM3+ Mobo that can use my existing CPU but also will take the bulldozer should i choose to upgrade...My MOBO now isnt even taking advantage of the 1600GSkill Ram i have as its only running at 1333 presently

[Rattlehead]

I'm interested to see how Bulldozer performs. I was trying to wait for BD to come out, but the wait became unbearable.

[Phazon]

The frequency of a CPU means little. Its all about the chipset design and how efficient it is. We'll see if AMD can match Intel over the coming months. :)

[Ze-Jamz]

The frequency of a CPU means little. Its all about the chipset design and how efficient it is. We'll see if AMD can match Intel over the coming months. :)

Hmm in not sure that will happen, or it might for a while but then Intel will release something to make them ahead again..

I think Intel have the edge slightly but AMD are very good value for money and have always been considerably cheaper

[Buchon]

Bulldozer 8429 MHz - World Record :

http://www.guru3d.com/news/amd-fx-processor-clocked-to-8429-mhz--world-record/

Bulldozer have a Turbo mode, that maintain quiet cores unused and overclock used cores, it can do 4.2 GHz by itself.

The FX-8150 have quiet frequency of 3.6 GHz and a turbo frequency of 4.2 GHz, by default and on air.

And that is with 8 physical cores so any comparative with i7 have no sense.

Is true that the speed is not all and what is important is that core structure, but that Buldozer can overclock well dont mean that the core structure is slow.

We should wait and see but it looks good certainly. :)

[Oldschool61]

I haven't been keeping up with the trends for a while now, but today I was curious about bulldozer. Went to one of my favourite reviewer sites and found this ...

http://www.hardocp.com/article/2011/09/13/amd_bulldozer_fx_model_8150_cpu_overclocking_previ ew

4 GHz on air ... I want a Bulldozer CPU now :P

Did they mention that they got the BUlldozer to about 8.2 Ghz on liquid helium setting an official PC record for highest frequency.

[Flanker35M]

S!

Using AMD 1090T Black Edition now and very happy with it. Very nice performance for the price. So I will for sure get the Bulldozer along with the new 990FX chipset and forthcoming new Radeons :)

[TonyD]

I’m half-way there with my new mainboard, but probably won’t get Zambesi when it’s released – rather wait for the next stepping which will be further optimised. In the meantime, I’m quite happy running my C3 Deneb at 3.8GHz and cheap-ass DDR-III 1333 memory at 1500MHz using 225MHz bclk with no voltage mods and air cooling (although a CoolerMaster Hyper 212 rather than the stock unit) :)

[Stealthy]

I'm pretty sure performance is based off how well the program is written for multi-core use. I know Intel has released a library just for this, http://threadingbuildingblocks.org/ (works on AMD aswell)

[Baron]

Did they mention that they got the BUlldozer to about 8.2 Ghz on liquid helium setting an official PC record for highest frequency.


They where running that on 1 BD module (2 cores, kind of) and the rest shut down, witch imo means nothing in terms of actual stock performance.

As far as the prize goes the top BD will be about 50 euros more expensive than the i2500K, at least where i live.

I think AMD is in for a very tough time.


P.S. Have my i2500K running at 4.1 GHz on air. Oc`d it to that without even trying really.

[CWMV]

I haven't been keeping up with the trends for a while ...

4 GHz on air ... I want a Bulldozer CPU now :P

Lol with the i7 2600k and even the i5 2500k there are reports of 5GHz on air.

i7 2600k here.
I'm doing 4.4 on air, and its a very mild OC done with ASUS's auto OC program.
Runs fairly cool too as far as I know, but my knowledge of such things is rather limited.