What's with the Fiat G.50 gunsight?

[addman]

The MG's doesn't fire in line with the three dots in the middle of the sight. When I fire I see the tracers going ABOVE the three dots, almost in line with the first ring. The guns ARE supposed to fire in line with the dots in the middle, right? or am I missing something here? It's not the view angle because I've already centred the gunsight (ctrl+F1). Anyone?

[Bewolf]

have the exact same problem. Thought it may have to do with convergence, but that can't be possible at the distances I use (100m). So I suppose something is definitely wrong there.

[[URU]AkeR]

Well i dont have COD yet but it is probably because of the convergence. The bullets should cross the gunsight at the distance of convergence.
As bullets fall because of gravity, the longest the convergence, the higher angle tehy come out the barrel.
So if your convergence is 500 and you shoot to a target at 250, with thw target exactly centered in your gunsight your bullets will probably go above target and you miss the shot

[[URU]AkeR]

Bewolf beat me. And if convergence is 100m then is probably something else

[addman]

Hmm, I'll try some different convergence settings later to see if it helps. Thanks for the tips!

[jojovtx]

And what were the results? Flew the G50 today and round fired way above the gunsight reticle.