Fulqrum Publishing Home   |   Register   |   Today Posts   |   Members   |   UserCP   |   Calendar   |   Search   |   FAQ

Go Back   Official Fulqrum Publishing forum > Fulqrum Publishing > IL-2 Sturmovik: Cliffs of Dover > Technical threads > Controls threads

Controls threads Everything about controls in CoD

Reply
 
Thread Tools Display Modes
  #21  
Old 09-20-2012, 03:04 AM
Torian Torian is offline
Approved Member
 
Join Date: Dec 2010
Posts: 36
Default

Definitely need carb heat above 5000ft and mixture all the way forward (which is wrong). No problems for me when I do this but also run in full coarse pitch. May need to throttle back to 2.5 boost but smooth flight is no problem.
__________________
Main gaming pc.
i7 960 Quad core @ 3.2 Ghz
Asus nVidia GTX 580 vid card with 1.5GB DDR5 memory
24 GB DDR3 RAM @ 1600mhz
Win 7 64bit Pro

Laptop
Asus G73JW
Intel i7 740 quad core 1.76Ghz
nVidia GTX460 mobility 1.5GB DDR5
8GB DDR3 ram @ 1333mhz
Win 7 64bit Home Premium
Reply With Quote
  #22  
Old 09-20-2012, 04:03 AM
Torian Torian is offline
Approved Member
 
Join Date: Dec 2010
Posts: 36
Default

I posted this link over at ATAG but will put it in here. It's worth a careful read but here is a paragraph that I think is very relevent if u haven't got the mixture orientation correct in CloD

http://flighttraining.aopa.org/stude...l/mixture.html

"Excessive leaning at cruise power above 75-percent power will invite engine damage from overheated valves and incur the possibility of detonation. The probability of damage from over-leaning decreases rapidly as cruise power is reduced from 75 percent. For example, there is considerably less, if even any, possibility of engine damage from over-lean mixtures at 50-percent power. However, an over-lean mixture can foul spark plugs and combustion chambers because of cylinder misfiring.

Many older engines are equipped with non-alloy steel exhaust valves. During normal cruise power (approximately 50 percent to 75 percent) the exhaust valve will become glowing hot during the period that it is open and exposed to the hot gases leaving the cylinder. If the mixture is lean enough to create an oxidizing atmosphere, the exhaust valves usually will be damaged. (An oxidizing atmosphere is always present in lean mixtures.)"

This may be why u are getting rough performance Ivank if your mix levers are all the way back and u are using more than 75% power and/or climbing.
__________________
Main gaming pc.
i7 960 Quad core @ 3.2 Ghz
Asus nVidia GTX 580 vid card with 1.5GB DDR5 memory
24 GB DDR3 RAM @ 1600mhz
Win 7 64bit Pro

Laptop
Asus G73JW
Intel i7 740 quad core 1.76Ghz
nVidia GTX460 mobility 1.5GB DDR5
8GB DDR3 ram @ 1333mhz
Win 7 64bit Home Premium

Last edited by Torian; 09-20-2012 at 04:17 AM.
Reply With Quote
  #23  
Old 09-20-2012, 04:15 AM
IvanK IvanK is offline
Approved Member
 
Join Date: Oct 2007
Location: Australia
Posts: 886
Default

I see where you are coming from Torian but given these things were meant to be AUTO RICH and AUTO LEAN with documented Boost limits for the AUTO LEAN setting rough running (assuming limits are observed) should not be an issue.
Reply With Quote
  #24  
Old 09-20-2012, 04:34 AM
Torian Torian is offline
Approved Member
 
Join Date: Dec 2010
Posts: 36
Default

Agreed but "meant to be" and what what we have been lumbered with in CloD are very different. Unfortunately we have to learn to manage the engines in this sim in ways that weren't necessary in real life.
And in the case of Brit fighters, with less performance than they actually had.
__________________
Main gaming pc.
i7 960 Quad core @ 3.2 Ghz
Asus nVidia GTX 580 vid card with 1.5GB DDR5 memory
24 GB DDR3 RAM @ 1600mhz
Win 7 64bit Pro

Laptop
Asus G73JW
Intel i7 740 quad core 1.76Ghz
nVidia GTX460 mobility 1.5GB DDR5
8GB DDR3 ram @ 1333mhz
Win 7 64bit Home Premium

Last edited by Torian; 09-20-2012 at 04:37 AM.
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 02:22 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 Fulqrum Publishing. All rights reserved.