Control Devices & Wheel Issues

[Kimmy]

I had the same problem. Then USA Trucker gave me the answer.

Originally Posted by USA Trucker

I had this problem myself. It's a long process, and you need to do it only once. You need to go to Documents\My Documents\My Games\RigNRoll_eng\Your Name\Double-Click on Configuration Settings (it's the one with your name on it with the sprocket symbol). It took about 45 minutes to get it right where I want it. Your preference may differ, but this is my set up using Windows 7x64 file location directory. Once you find it, scroll down until you get to here:

[control Logitech G25 Racing Wheel USB]
pa_VVK_CARV_CLUTCH="JS1-F"
p2_VVK_TURNSIGNAL_LEFT="JB6"
p2_VVK_FM_RADIO_ON=""
p2_VVK_VIEWER_OUTSIDEVIEWMODE="JB18"
p2_VVK_CARV_ACCEL2="JB7"
p2_VVK_MAP="JB1"
p2_VVK_CARV_GEARUP="JB9"
pa_VVK_CARV_ACCEL="JA3-F"
pa_VVK_CARV_BRAKE="JA6-F"
pa_VVK_CARV_RIGHT="JA1+"
p2_VVK_CRUISECONTROL="JB8"
p2_VVK_BEAMS="JB4"
p2_VVK_WIPER=""
check="1"
p2_VVK_HORN="JB7"
p2_VVK_CARV_HANDBRAKE="JB2"
p2_VVK_CARV_GEARDOWN="JB10"
pa_VVK_CARV_LEFT="JA1-"
p2_VVK_CAM_NEAR=""
p2_VVK_CAM_POS1="JB17"
p2_VVK_CAM_POS3="JB19"
p2_VVK_CAM_POS4="JB17"
p2_VVK_CAM_POS5="JB18"
p2_VVK_CAM_POS6="JB19"
p2_VVK_CAM_POS8="JB16"
p2_VVK_TURNSIGNAL_RIGHT="JB5"
p2_VVK_CHANGE_PYRAMID_TELE=""
p2_VVK_CHANGE_PYRAMID_WIDE=""
p2_VVK_CARV_GEAR1="JB9"
p2_VVK_CARV_GEAR2="JB10"
p2_VVK_CARV_GEAR3="JB11"
p2_VVK_CARV_GEAR4="JB12"
p2_VVK_CARV_GEAR5="JB13"
p2_VVK_CARV_GEAR6="JB14"
p2_VVK_CARV_GEARR="JB15"
p2_VVK_MONITOR="JpovB7"
p2_VVK_PAUSE="JpovB1"
p2_VVK_MIRROW_RIGHT=""
p2_VVK_MIRROW_LEFT="JpovB7"
p2_VVK_ORGANIZER="JpovB3"
p2_VVK_SCREENSHOT=""
p2_VVK_MAP_MISSION_SELECTOR="JpovB3"
p2_VVK_ENGINE_BRAKE="JB3"
p2_VVK_NITRO_BOOSTER="JB4"
p2_VVK_HAZARD_LIGHTS="JpovB5"
p2_VVK_ATTACH_SEMITRAILER=""

HTH

[Gamar]

Hey

New here so here goes.

I load up Rig'n'Roll, press escape to get away from the 5,4,3,2,1, thingy and get to the main menu. I move to mouse to click on the menu buttons but the on screen pointer does not move.

I have tried messing with control and video setting using the keyboard (slow) but it did not seem to work.

Thinks in Advance

Gamar

[USA Trucker]

Originally Posted by Gamar

Hey

New here so here goes.

I load up Rig'n'Roll, press escape to get away from the 5,4,3,2,1, thingy and get to the main menu. I move to mouse to click on the menu buttons but the on screen pointer does not move.

I have tried messing with control and video setting using the keyboard (slow) but it did not seem to work.

Thinks in Advance

Gamar

Hello, and welcome to the forum.

What other control devices do you have conected?

[Melkor]

Question, when you set the feedback on high for steering wheel or force feedback does this afect the sensitivity for the sterring wheel?.
Reason why i asked is because when im doing a turn, it rarely happens but, the truck loses control randomly. Is this because i need to repair my tires or purchase new ones or just the feedback/sensitivity?

[USA Trucker]

Originally Posted by Big ZZ

Hi there New here so bear with me. I have just bought R'N'R and found it quite fun but i am uesing a old MS FFB wheel with the game so far i have found it works fine unlike some of the postings i have read here the only thing i have issue with is when you get an incoming CB call all FF disapears which can land you in the armco if you are not ready for it is this a common fault or just somthing im going too have too get uesd too.

Hello, and welcome to the forum.
I have not heard of this problem. It could be a problem with both the game, and your MS steering wheel. If it really hampers playability, I would just turn off the FF, and see how it goes.

Originally Posted by Melkor

Question, when you set the feedback on high for steering wheel or force feedback does this afect the sensitivity for the sterring wheel?.
Reason why i asked is because when im doing a turn, it rarely happens but, the truck loses control randomly. Is this because i need to repair my tires or purchase new ones or just the feedback/sensitivity?

I don't believe it's a feedback issue. Mine is set to max also. Being that it doesn't happen often, I can only assume it's a repair problem. If you're losing control, your tires may be listed in red at the repair shop instead of the usual yellow.

[Melkor]

hmmm it seemed it was my tires ( i was using the standard tires )
So should i just repair them or do a full upgrade?

[Krazy]

Hey,
After a long time trying to fix that problem (and even taking a break from RNR because of this) i come back here to see if someone can help me.
the problem is that neutral gear is not working (it's suppose to go to "neutral" if i don't select any speed but in my case, it's staying in the last gear engaged (so if i'm using 2nd , i stop the truck, put the gearbox on neutral, it's staying in the 2nd)

Is it normal? if not, somebody with a g27 can explain how they avoid this problem?
Thanks in advance to anybody

[kennyb87]

It's been a while since I last played the game but I just press the clutch (G25 Owner) To go back to neutral while no gear is selected

[nextai]

Originally Posted by nextai

Hi there, I'm experiencing the same issue as Gamar. I am "able" to move the mouse through the menus, however, the pointer remains still on the screen. The menu navigation is close to impossible if you can't see the mouse pointer. Here are my system specs:

OS: Win7x64 Ultimate
CPU: Intel Q6600 @2.4Ghz
RAM: 8 GB
GPU: Nvidia GeForce 8800GT - 512 MB
Input devices: Logitech G11 gaming keyboard with latest driver
Gigabyte Laser Mouse GM-M6880 with latest driver

Thanks in advance for your help !

Ok, I managed to solve the issue by setting the font size to 100% in Control Panel\All Control Panel Items\Display . I have a 26'' monitor and my native resolution is 1920x1200, therefore I need to set my fonts to 150% in order to be able to read text.

So, a bug to fix in next patch: The mouse pointer in RnR no longer moves when setting large fonts via Display Properties (150% in my case). Using "Disable display scaling for high DPI settings" for the rnr executables also has no effect.

[Big ZZ]

Hi there New here so bear with me. I have just bought R'N'R and found it quite fun but i am uesing a old MS FFB wheel with the game so far i have found it works fine unlike some of the postings i have read here the only thing i have issue with is when you get an incoming CB call all FF disapears which can land you in the armco if you are not ready for it is this a common fault or just somthing im going too have too get uesd too.