Bug-Thread for RC1&2 British Engine Hotfix + SLI/Crossfire test & RC2 release

[JG52Krupi]

Please B6/Luthier can you look at making hud information server set?

For example damage information, personally to make it more "realistic" I fly with the damage info off, I fail to see why a person on a full realistic server should be allowed to see what damage they are getting.

This info needs to be controlled/set by the server not the player.

[David198502]

i agree with that!
+make it optional for servers, which infos are displayed...for example on a full real server, it would be better not to know immediately if you just killed the pilot in the plane in front of you

[David198502]

ok i really like the fact, that the british planes now perform better again....
but at +5000meters, the hurri 100octane is outrunning,and outclimbing the 109...(even vertical)
while spits lose all their performance up there...

so give the 109 and the spits better speed and performance at those altitudes...!

[Tte. Costa]

Originally Posted by JG52Krupi

Please B6/Luthier can you look at making hud information server set?

For example damage information, personally to make it more "realistic" I fly with the damage info off, I fail to see why a person on a full realistic server should be allowed to see what damage they are getting.

This info needs to be controlled/set by the server not the player.

+1

[priller26]

Bug request, for the future , so that no one can tell me that goose has already laid its eggs, please fix the prop flicker, and the horizontal tearing of the screen associated with it.It's NOT just the flicker of the prop, the prop causes horizintal tearing mid screen, if your flying a BF 110, it causes tearing to the sides, YOU created it two patches ago, please fix it when you can, UNLESS this is not a graphical error.

http://www.youtube.com/watch?v=qTgSG...ature=youtu.be

[rslot]

Sorry Luthier, Hurricane still not starting properly with hotfix + RC for me.
Did the usual install verification and cleared cache before applying beta's.

The Bad
Tested offline, Training, first solo flight and as per previous RC the hurricane does not start.
Spent over 10 mins turning engine over on time acceration x 16 until water temp reached ~30'C before it eventually spluttered into life. This needs to be fixed before final release please.

I have also noticed the mixture control lever does not now work via clickable cockpit and i had to bind a key to make it move.

Still getting exhaust glow in the bottom of the cockpit in the British planes.

The Good
The sound is so much better. Compliments to whoever coded the recent update. Merlins sound good and the dopler effect is OK. I have even heard breaking glass when shooting up a hanger as an alternative to the oil/gas storage (in frustration from not being able to start the Hurri).

Thanks for your efforts.

[Bounder!]

Just tried the 100 Oct Hurricane online (ATAG server). Had no problems starting the engine.

Could only use the boost cut out on lean mixture on the deck at rpm 26,000-28,000, using it with auto rich results in bad shaking. This needs fixing.

Hurricane still turns like a brick when it should be the best turn fighter out of the 3 main BoB ac (Hurricane>Spit>>>109).

[IvanK]

When you say the Hurricane still turn likes a brick what exactly do you mean ?

I had a sustained turning engagement on the deck with a well flown BF110. The Hurri easily won the turn fight.

[Cataplasma]

SLI DEFECTIVE

no fps increase but a little decrease (with a default nvidia profile).
There's a good fps increase with AFR or AFR2 modes enabled but a huge amount of stuttering coming out.

[RickRuski]

Performance about the same for me but with increased stutters.

Have tried different drivers with no change by going back to earlier versions, so it's 306.23 for me. (latest WHQL).

Double reticile at startup just prior to epilitic warning screen.

Have just about got it back to original performance prior to latest patch with some tweeking but can't get rid of increased stutters.

This is what I'm getting in the pre start screen.