Ati 5970 2 gig ?

[Troll2k]

The blue horizontal stripes seem to only be a problem with the ATI 69xx cards.

Whether it is the game or a driver issue it is still unknown.


On another note, a very well done, week long,scientific test by TXgunslinger determined the microstutters were caused by the cpu and not the video card.

"In summary - It's the CPU not the GPU that producing the stutter and pausing."

http://forum.1cpublishing.eu/showthr...=TX-gunslinger

[MegOhm]

This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini


ATI HD 5970 Card Settings:
AA: Use App Preference (Morphological Filtering unchecked)
AF: 16X
Tessellazation:OFF AMD optimized unchecked
CAT AI: Performance with Enable Surface Format Optimization Checked
MipMap Detail Level: High Quality
Vertical Refresh: OFF - unless app calls for it
AA Mode: Multi-Sample AA
OpenGL: Triple Buffering Checked

In Game Settings
Resolution: 1920X1080 60 HZ
Psuedo Full Screen
Model Detail: High
Buildings Detail: Medium
Land Detail: Medium
Forest: Low
Visual Effects: High
Texture Quality: Original
AA: 4X
Anti Epilepsy: OFF
SSAO: Off
Vert refresh: checked
Damage Decals: High
Buildings Amount: Medium
Land Shading: Low
Grass: On
Shadows: On
Roads: Off

Intel Core i7-980X Extreme(12MB L2 Cache, 3.33GHz), 12GB DDR3 SDRAM,1333MHZ, 6x2GB, ATI Radeon HD5970, ATI 11.3 Driver, Sound Blaster X-Fi Titanium, 2TB Serial ATA 2 Hard Drive 7200 RPM, Windows 7 Home Premium, 64bit, 52" Panasonic Plasma, Logitech G930 wireless Surround Sound Headset, TrackIR5/Proclip

[naz]

Originally Posted by MegOhm

This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini

If you have a quad+ core I believe you should not be manually setting the process afinity mask setting in the config file:

Quote from Luthier: "We did unload a bunch more stuff into other cores already though. It will obviously only lead to performance improvement if you have more than two cores, and if you haven't manually set your processaffinity in the conf.ini."

http://forum.1cpublishing.eu/showthr...=23002&page=41 post 401

[Kankkis]

Robin, don't sell your 5970 card, it's a really good card, what we need is good crossfire profile from ATI, or good crossfire suppord from devs.

There is only 1 card from ATI what is faster than yours, it's 6990 and it's crossfire card too, so same problems with CoD, if you buy one GPU card you downgrade your computer.

all 5970 is downclocked from factory, so i overclocked mine and get about 25% faster 5970 than default, of course i cannot say overclock it, that is risky but i put link to you, i do it and my card is very fast at moment and stable with factoryfan.
i raised my voltage only 1 notch as you see at the link, only software i use was MSI Afterburner, and i overclock only when there is need to it (A-10 and CoD)

http://www.guru3d.com/article/overcl...on-5970-guide/

Kankkis

[Robin2k7]

[QUOTE=MegOhm;287876]This is a good card, I have the same one..... Try these settings

Changed ProcessAffinityMask to 63 from 14 (";" removed) - 6 core processor - config.ini
Renamed Logo.waw to stop UBI Splash (In parts/core folder)
Changed Render to D3DD_11 from D3DD_10 - config.ini


when i change render to 11 the ground looks blurry ...i am not very good with this is it the config file in your documents ore is it in the steam directory and
fore some reason i cant find ProcessAffinityMask in my conf file .

with the old patch i saw them but right now its gone .

[Ataros]

Originally Posted by Robin2k7

i am wondering ...i cant get COD running smooth no matter what i try(over land) .

Yesterday things changed for your card. I already posted this link in your previous thread. Have you read it? Anyway have a look at it before you sell the card.

Originally Posted by Kankkis

I can say this WORKS like a beuty, i got steady 60FPS over London and really ZERO stutter, Little stutter when maxed.

Not so bad.

[Thee_oddball]

Originally Posted by Robin2k7

i am wondering ...i cant get COD running smooth no matter what i try(over land) .

1 person told me that because i have dual processors only 1 gig each and that cause lots of problems (micro stutters) .

if i need a other cart what cart you suggest i buy(ati ore G-force) and what type..especially fore COD .

help me out people

thanks in advance

like ataros said the micro stutters have nothing tod with the GPU , i get an AVG of 32fps overland in "black death" trak from inside cockpit and even higher on dogfight servers.

I know this is a PITA but i would recommend a fresh install of windows with nothing but the game installed and then try and see what performance you get, i say this because that is what i run a stripped down win7 for games only! ..it really does help performance

S!

[Bryan21cag]

Originally Posted by Robin2k7

i am wondering ...i cant get COD running smooth no matter what i try(over land) .

1 person told me that because i have dual processors only 1 gig each and that cause lots of problems (micro stutters) .

if i need a other cart what cart you suggest i buy(ati ore G-force) and what type..especially fore COD .

help me out people

thanks in advance

Before you do any of the complicated mishing and moshing of all the settings and that...... make sure your running the most up to date drivers i was getting the same micro stutters and crap performance even after the patch but then updated to 11.5 ATI drivers for my cards and all of a sudden stutters were gone and i was getting very good frame rates with all graphics turned up over London. Still not perfect but far better then what i think your seeing now.

Hope this works cheers

[Robin2k7]

guys i really appreciate your comments on this 1 ...its early in the morning and my cellar is fulled with water .

so in a few ours i am ready and than i am gonna check your ideas and adjust my settings ..

once again thanks a lot and i am sure it i get this problem fixed !! .