![]() |
|
|
|
#1
|
|||
|
|||
|
Is anyone else having problems with the U2-LNB? Specifically when dropping bombs, despite being above the minimun altitude, they still do not explode.
Tried with 6xfab50s. Used an instant fuse first time, instant. Another player was using 2xfab100_2xfab50 bombs unknown fuse. Third player was using the 2xabkp3, again don't know which fuse setting. No one could get bombs to explode. Last edited by Marabekm; 08-22-2018 at 12:10 PM. |
|
#2
|
|||
|
|||
|
Quote:
i suppose speed of u-2 is too low to armed fuse...
__________________
work hard, fly fast |
|
#3
|
|||
|
|||
|
I posted something about this with pics awhile back, if you link the U-2 to the target they go in way to low, like almost wheels on the ground low and the bombs cant arm or they blow themselves up if you selected instant as flight leader. For mission building purposes the best way to use U2 is as a 700-1200m level bomber, unlinked to its target. Linking leads to almost 10m or lower approach and disaster. Best overall weapon is for 6x fab 50 in pairs from 800m, or attacking trucks from rear in shallow dive dropping in pairs. AI does its own thing and usually kills itself. Unlinked it will drop over intersection, town etc and usually survives as its high enough. Tell it to attack vehicles and usually ends in plonking into the ground.
|
|
#4
|
|||
|
|||
|
Quote:
For example, flying an IL-2 between 20 m and 30 m, and 4 Fab-50 with low fuze at 160 km/h may result in a dud. Flying at the same altitude and 270 km/h will result in an explosion. I have also noticed that bombs start whistling one they are armed but it doesn't work every time. |
![]() |
| Thread Tools | |
| Display Modes | |
|
|