List of objects for WIP maps: 3rd party contributors welcomed

[Spudkopf]

Originally Posted by _1SMV_Gitano

Boccadifalco was the old Palermo airport. It is still in use by small aircraft. I have to check the schemes to see if it corresponds. But 5m seems a bit small to me. That one in particular could have be used to house any other equipment like e.g. petrol tanks or motor vehicles...

As a rule of thumb, I would keep the same base aperture of the small V revetment.

Oopps my BAD - been so backwards and forwards with scales this evening, I totally missed that it was only 5.4 metres.

But to belay your fears, I based the dimensions for the model on those from the diagram so it is slightly narrower and shorter than the V type, but due to having parallel walls it can afford to be, see below:



But if you want it bigger let me know!

[_1SMV_Gitano]

I would keep the dimensions as they are now

[Spudkopf]

I decided to build the Lods 00 through 03 for Y type before I hit the sack, (just gone 01:00 so it's a tad late considering I've been up since 05:00 yesterday).



As it is a quite simple, yet at the same time a complex shape, I could not make a difference between Lods 02 and 03 without insurring a drastic change in the geometrics, that I'm concerned may cause a significant pop, so will need further guidance here.

[_1SMV_Gitano]

If I remember correctly the change between LOD2 and LOD3 happens usually at few kilometers so any simpler shape would not harm. But I step aside here and wait for more wiser comments... anyone(Sita?) could say something on this?

[Sita]

don't hurry ...

need map and paint first lod .... as i say already ... for now it's double work ...

[Spudkopf]

Originally Posted by Sita

don't hurry ...

need map and paint first lod .... as i say already ... for now it's double work ...

.....sorry was not trying to jump the gun here, the above double work was just more modelling skill practice on my part, as I'm just making sure that I have the lod creation techniques established and locked away and refining my work flow process, agiain sorry for causing any concussion.

[Sita]

ok ok))