BlenHeim won't start

[ACSoft]

Thanks a lot Roblex, I succeeded in starting my Blenheim engines for the 1st time, with your procedure !

My problem whas certainly because I was not setting the throttle lever independently, just before to press "I". Doing that way, it work, but as you said the acceptable setting marging is narrow !!! Tricky !

Yes, I have found and identified the selector switch for the fuel gauges, on the left of them, almost hidden !

Thanks again and good flights to you !

ACS

[Sokol1]

My problem whas certainly because I was not setting the throttle lever independently, just before to press "I". Doing that way, it work, but as you said the acceptable setting marging is narrow !!! Tricky !

Tip for this:

Besides assign throttle on axis, assign to on keyboard keys, ie - +

So just one touch in + put throttle in ideal position to start the engine.

Sokol1

[Skoshi Tiger]

Another tip for Blenhiem

Make sure you go to the loadout screen and adjust fuel/bombload to keep within weight limit.

In many cases you can go with 30-50% fuel and still have enough for most missions.

[Slipstream2012]

I only ever use 20% of fuel in the blennie, thats enough to get you more than half way around the Channel map and back.

[ACSoft]

Thanks guys for all your good advices !

ACS