E-4 Prop Pitch Working as it should?

[IvanK]

Something odd there It behaves flawlessly for me. If you get the engine hot it will affect the RPM quite dramatically in the E4. Perhaps that was the issue forgot the Oil rad ?

[Ze-Jamz]

Hi..

No Oil rad was open as usual..no difference on anything I done...I exited the game and returned and it seemed OK again for the short time I was flying..

I remember reading on here there were some issues with the auto prop but I never experienced them until now..

IvanK do you not need to switch between manual and auto when you first take off? so it doesn't start acting up?.I thought everyone experienced this..

[IvanK]

Originally Posted by Ze-Jamz

Hi..

No Oil rad was open as usual..no difference on anything I done...I exited the game and returned and it seemed OK again for the short time I was flying..

I remember reading on here there were some issues with the auto prop but I never experienced them until now..

IvanK do you not need to switch between manual and auto when you first take off? so it doesn't start acting up?.I thought everyone experienced this..

I always Select Manual on the ground before start. The prop then starts coarseing off (It shouldnt). I stop it set full fine (12:00). Take off in manual then as RPM hits 2300 just after take off hit Auto. If climbing at full throttle I just leave it in Auto.

If climbing at reduced ATA (like 1.25) I go Manual and set 2300RPM. As soon as combat looks likely Full throttle in AUTO. I fight in AUTO and generally combat cruise in manual with 2300RPM set. For general non combat sight seeing I just leave it in AUTO.

Once back in the circuit for landing I go manual and full fine (12:00)

That works for me.

[Ze-Jamz]

Originally Posted by IvanK

I always Select Manual on the ground before start. The prop then starts coarseing off (It shouldnt). I stop it set full fine (12:00). Take off in manual then as RPM hits 2300 just after take off hit Auto. If climbing at full throttle I just leave it in Auto.

If climbing at reduced ATA (like 1.25) I go Manual and set 2300RPM. As soon as combat looks likely Full throttle in AUTO. I fight in AUTO and generally combat cruise in manual with 2300RPM set. For general non combat sight seeing I just leave it in AUTO.

Once back in the circuit for landing I go manual and full fine (12:00)

That works for me.

Yea pretty much the same for me..I dunno maybe it was a one time bug, I'll find out again later, was positive people were talking about the auto pp in the game though...guess it was my imagination

S

[Redroach]

I've had the same problem. The auto-pitch worked itself all the way down to 8:30 just after engine on. But taking of while on manual (and set at 12:00 or 11:30 by me), and shoving the automatic back in afterwards, fixed it!

I'm just not sure if there's ever any slat coming out in any situation. Everytime I try something even remotely hard-turn-ish, I stall and spin faster than the bullets fly. With engine torque or against it, it doesn't even matter.
And by general consensus, in RL, you gotta mean it if you wanted to stall the Me-109, in all incarnations...

[Untamo]

S!

Yeah the E-4 auto pitch is somewhat bugged, but there's a easy fix for it. Just every time after starting the engine -> auto off -> manually adjust the pitch to some direction -> auto back on. Now it works properly

[Ze-Jamz]

Originally Posted by Untamo

S!

Yeah the E-4 auto pitch is somewhat bugged, but there's a easy fix for it. Just every time after starting the engine -> auto off -> manually adjust the pitch to some direction -> auto back on. Now it works properly

I understand that and have always done that anyway but this instance was different...still not convinced its working properly as it should and is given optimum performance